Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Recovery Raid1 Drives in failed Win7x32 system won't move to x64upgrad

17 Feb 2016   #1
PMJitterA

Windows 7 x32
 
 
Recovery Raid1 Drives in failed Win7x32 system won't move to x64upgrad

Issue:
Failure of Two 1GB HDD drives, Mirrored-RAID1, using Win7x32 Disk Management, 1GB on OC’d system were removed from system after Boot drive failed, and reinstalled on the same system, after new SSD and Win10x64 was installed. Win10x64 Disk Management has marked the drives as dynamic, online, and failed after Import Foreign Disks command.

Minimum Goal for Success:
Reattach One of the two drives to have access to the Data files in both partitions that existed on the Mirrors.

Initial System Configuration when the drives were mirrored in 2011:
Asus P5Q Pro Turbo, Q9400, OC’d to 3.2G with FSB=400Mhz and some voltages modified. C: drive were two 36GB Raptors in Raid0 using ACH10 Intel Raid controller. Mirrored two 1GB Hitachi drives with Windows Disk Management into two partitions using Windows 7x32. All drives SATA interface.

Current Configuration with the drives not accessible:
Asus P5Q Pro Turbo, Q9400, Default BIOS, No OC'ing. C: drive changed to SSD Samsung 850 Pro 240MB and loaded new Win10x64. All drives installed on same SATA interface as before.

Possible Actions that contributed to the Issue:
The initial system under Win7x32 failed to boot from RAID0 C: drive likely due to ACH10 and CMOS, which meant that the RAID1 Mirrored drives with the data I want to recover where not removed from an active system gracefully.

Status:
The drives were attached via original SATA cables. Win10x64 recognized both the Drives as Foreign. “Import Foreign” was executed. Drives are shown as “Dynamic” “Online” and partitions are marked “Failed”. Rescan and other commands do not seem to work. The drives are shown with red bar indicating Mirrored. Unusually, the drives do not show the same partitions. Drive 0 has two partition, Drive 1 has three partitions. The shown size of Drv0Prt0 = Drv1Prt0 + Drv1Prt1. Drv0Prt2 = Drv1Prtr3 in size.
“TestDisk” was used to view the drives. I have found all the data, but sometimes I have to use the deepscan to find it. I am careful NOT to execute any write functions as I am not clear what the heck I would be doing. TestDisk seems to show the same partition count matching what Windows Disk Management is showing.
I even found two posts on using HEXEDIT to change a single byte on the file data so it would change from dynamic to basic and I could attach a single drive. https://www.youtube.com/watch?v=9EZXceqY4hU
I don’t want to risk the data yet but I can execute this with ease. My skill set is degreed computer engineer but not in the PC field – Video and Telecom. Thanks!

Suggestions Received:
(1) Format one of the failed drives so the Recuva can see the drive, and recover the data – This would be destructive in order to be productive – (STBe – I have not done this action yet – RECUVA does not see either of the two drives that were RAID1.)
(2) Copy one of the failed drives to another drive, and test on the other drive using TESTDISK or other program. (STBe – DO I need to worry about bad sectors on the destination drive leading to an imperfect copy? – Are there other concerns that I do not know about – What program would be best for this?)
(3) Use Minitool Power Data Recovery – (This SW will see one of the two drives and shows the same file list shown in TESTDISK. IT will deepscan and see the files from the second partition, but without the names. I am still considering this as an option)

I am still hoping for further expertise in this matter before do it yourself time. Thanks!


My System SpecsSystem Spec
.
Reply

 Recovery Raid1 Drives in failed Win7x32 system won't move to x64upgrad




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Win 7 System Restore from Recovery partition on failed HDD to new HDD?
HDD is failing. I spent the last 16 hours reading the BSOD threads and decided to accept my fate. I can provide details if anyone is interested, but I've decided to replace the HDD. I'm posting here to run my plan by the experts in case it is incredibly stupid and would not work. Problems: ...
Backup and Restore
Windows Failed Install after (Windows7) system recovery.
I had previously had a issue with a virus/Trojan, I downloaded multiple aintvirus/malware removel Tools, to no avail. So I decided to do a full recovery, apon the recovery completion my system starts to reinstall windows. At that point after registry install the system gives error message that...
Installation & Setup
RAID1 split drives, now can't see erased HDD
I'm running RAID1 with two 1tb drives. My RAID went critical and split the drives. One drive was listed as LD 2 -1. The other is listed as <single disk>. I was able to unplug either individually and boot into windows. I decided to erase one of them and planned to rebuid the array afterwards. ...
BSOD Help and Support
How do I break failed software RAID1(mirror) in Windows 7?
I want to break a software RAID1(mirror) in Windows 7, without losing the data on any of the two HDDs. One of them has developed some weak sectors and I want to compare the data on both of them. As you can see in the attached image, it says Errors under Disk1, and Online under Disk2. The...
General Discussion
Thinkpad Windows 7(with truecypt) system recovery failed
Hello experts. I couldn't do a system update with the lenovo update tool nor upgrade the adobe flash player, so I went to do a system restore using windows system restore. Everything went fine(no power outage, etc), but when the comp restarted, it showed this: ...
BSOD Help and Support
vistax64 to win7x64 to win7x32
I have a new PC Acer m3300 (with an AMD 64 bit processor - Phenom II) for my father-in-law. It came with vistax64 home premium which is installed by hitting alt-f10 after powerup. Acer are offering a windows 7 upgrade option here - Windows® 7 Upgrade Offer for which we are eligible. There is an...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 03:31.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App