Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Sigma USB Dock error "Cannot recognise the USB DOCK"

29 Mar 2016   #1
Kanoebilldr

Windows 7 Pro 64 bit
 
 
Sigma USB Dock error "Cannot recognise the USB DOCK"

Hello,

I am trying to get my Sigma USB dock and software to recognize the dock and lens. I will try to list as much information as possible.

USB Dock for Nikon
150-600 Contemporary lens
Windows 7 Pro SP1
Intel i5 with 16gb of memory
Verizon DSL (Not Fios)

The Sigma USB Dock allows you to fine tune the focus of the lens at different focal lengths and distances using the Sigma Optimization Pro software. You can adjust the vibration reduction settings as well. The computer needs to be connected to the internet for it to work.

I have tried two different USB Docks (sent the first back).

I sent in the lens and dock together to Sigma at the direction of Sigma after contacting their tech department. The technician tested both together. He could find no problems and found it connected properly to the Windows 7 computer he used. He felt it might be a security issue with my antivirus. I have tried connecting the antivirus disabled with the same results.

Here is what I am experiencing:
After opening up the Sigma Optimization PRO program it asks me to connect the lens to the dock then the dock to the cable then to the computer. When I do the light on the Dock comes on and a popup window appears on the monitor saying "Checking for the latest firmware..." A moment later a window appears saying "Cannot recognize the USB Dock". When I click the CLOSE button it begins checking if the latest firmware for the lens is available then a window appears saying "Cannot recognize the lens".

I have updated the chipset for my motherboard and processor, and downloaded all the updates for the USB controller an everything else I could think of. I have tried every USB port on the computer. Both my handheld and vehicle GPS connect with no problems as do my weather station and SD card readers and USB memory sticks. I also tried restoring Windows to a point before I first installed the USB Dock. I have also uninstalled and reinstalled Sigma Optimization Pro multiple times.

Under Control Panel/Hardware and Sound/ Devices and Printers the USB dock appears as Unspecified. Under the Hardware tab it is listed as USB-DOCK and under Device Functions it reads:
HID Compliant consumer control device Type: Human Interface
USB Input Device Type: Human Interface
Device Status: The device is working properly

When I click on Properties for "HID Compliant consumer control device", then click on Driver Details it says "No driver files are required or have been loaded for this device".
When I click on Properties for "USB Input Device" it lists 3 driver files:

C:\Windows\System32\DRIVERS\hidclass.sys
C:\Windows\System32\DRIVERS\hidparse.sys
C:\Windows\System32\DRIVERS\hidusb.sys

It seems like all is connecting together properly but not communicating at the very last mile.

I also logged onto my DSL Modem and did not find any security settings which might have an impact.

Thank you for your help.

Bill M


My System SpecsSystem Spec
.
Reply

 Sigma USB Dock error "Cannot recognise the USB DOCK"




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
"Windows Loading Files" infinite loop, Can't Boot USB "disk error"
hello, let's just get to the point, i had this problem recently where my pc can load windows, it keep looping pc's on - booting - then "Windows Loading Files" - restart it's infinite :cry: i don't know what to do, i don't have a cd rom, and i can't reinstall my windows from USB because every time...
General Discussion
Attention photographers! Sigma USB dock error.
Hi again and I have need of a PC guru's help! I have just purchased a Sigma 24-105mm Lens (Canon fit). I also purchased the Sigma dock that is used for various adjustments and firmware updates on the new Sigma lenses. I have installed the dock software and followed the instructions but the...
Hardware & Devices
Does DOCK's (such as Rocket Dock,Object Dock etc) makes computer slow?
My Windows 7 Operating system is taking a lot of time during Start up.I was looking for an alternative to the regular icons ,scattered all over my desktop.So,i decided to try Docks such as Rocket Dock,Object Dock,Nexus,Rk Launcher or similar dock....It certainly looks beautiful but now i am...
General Discussion
Rocket Dock Error
Hey guys, I recently went to open a folder from rocket dock and I got this message from Stacks Docklet: The Operating System Denied Access To The Specified File. So I tried opening it without the stacks docklet and the "Open With" program pops up... :shock: .exe files open fine like firefox and...
Software
Getting rid of "dock-style" taskbar
Hello, I would like to make the taskbar in Windows 7 operate exactly like the taskbar in Windows XP: buttons on one side, windows on the other, a clear separation between them. Is this possible? Thanks, S.p.
Themes and Styles
Losing " Dell dock " :(
Hello Everyone , I really 've very complicated problem which is , why is this window empty , there's no programms ?? >> :cry::shock: http://i54.tinypic.com/34ifqxg.jpg
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App