Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Event ID 11 needs triage to identify the port

29 Mar 2016   #1
ineuw

Microsoft Windows 7 Professional 32-bit 7601 Multiprocessor Free Service Pack 1
 
 
Event ID 11 needs triage to identify the port

Can anyone please tell me how I can identify which Sata port would be for Even ID: 11?
"The driver detected a controller error on \Device\Ide\IdePort2."

The motherboard is SATA2 and the drives are configured as AHCI.

The ports are configured as follows:

Sata1: Sandisk 120Gb SSD boot drive
Sata2: Seagate Baracuda 500GB data drive
Sata3: Unused
Sata4: HL-DT DVDRAM ATA device
Sata5: Unused
Sata6: Unused

This error randomly appears after boot but not at each boot and sometimes days go by before it reappears. The Win 7 Pro is a fresh installation and every MS update has been applied. The controller driver is the latest update from Intel (thorough Microsoft update).

Thanks


My System SpecsSystem Spec
.
01 Apr 2016   #2
ineuw

Microsoft Windows 7 Professional 32-bit 7601 Multiprocessor Free Service Pack 1
 
 

It seems that in an all SATA environment, \Device\Ide\IdePort refers to the CD-DVD drive. Installed another disk drive and the disks are in the same order as the SATA port numbers identified by the BIOS as 1 to 4 and moved the CD-DVD to port 4 on the MB. Immediately, I got an Event ID 11 of \Device\Ide\IdePort04 error
My System SpecsSystem Spec
Reply

 Event ID 11 needs triage to identify the port




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
router not passing port scan after opening port
1. Is this a wired or wireless connection issue? wireless 2. Who is your Internet Service Provider (ISP)? Charter 3. What type of Broadband connection are you using? Cable 4. What is the exact Make and Model of your Modem, Router or Modem/Router Combo Netgear WNDR3800, Cisco DPC3008
Network & Sharing
Port forwarding(redirecting), NOT(!) port opening
Hi. I was tired when 50th result in google named "port forwarding" was actually question how to open port. To be specific, I would like windows 7 to do the same what this program does. Which means forward port... NOT fowarding port on my router NOT opening port(allow connections) in...
Network & Sharing
After BSOD Event Viewer Logs Event ID 3012 and 3011 every time I boot
I was running 3DMark06 and got a BSOD code 124. After that every time I boot Event Viewer logs Error Codes ID 3012 and 3011. Attached are screenshots of both. I googled this and found two different threads where someone suggested to rebuild the performance counters. Both responses were...
BSOD Help and Support
DVI port on monitor is stuck res of 640x480 VGA port works fine
I have dual monitors......my primary display monitor is a Chimei CMV223D My secondary display monitor is an Acer AL1916W. My graphics card is an HD ATI Radeon 5800. PROBLEM: My primary display monitor which usually has a display resolution of 1680x1050 is currently stuck on 640x480 and...
General Discussion
Event 1001 BugCheck Event 41 Kernel-Power Event 4 k57nd60a
Alright, started getting the 1001 BugCheck crash with Event 41 Kernel-Power BSOD a few times not long ago, widely spaced out incidents (it will lock up, make a very weird repetitive noise through my stereo speakers and will also get black and white bars across the screen before the blue screen...
BSOD Help and Support
WHEA-Logger event 18/19 errors in Event Viewer (W7 Home Premium)
Hi, I was hoping somebody could offer an insight on the below, as searching around I've not found much to go on other than "overheating" Basically my laptop has been having very high temperatures for a long time (usually ~60C for CPU and often 100-110 for GPU...insanely high, in other words)...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:00.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App