Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Merge two volumes(disks) back to one

30 May 2016   #1
animesekai

Windows 7 Home Premium 64bit
 
 
Merge two volumes(disks) back to one

Hi, I have a 3 TB Seagate Hard drive disk. When had it installed it showed as 2TB and not 3TB because it was formatted as MRB and had to make 2 partitions 2TB and 750GB, and they are shown as separate disk( disk 3 and disk 4). Tried changing it to GPT before doing the partitions, but for some reason it didnt work.

So , now I am using this program "EaseUS Partition Master", and was able to convert the two partitions into GPT, but when tried to join the two volumes which now are disks back, I get this error message " There is not enough space available on the dist to complete this operation".

I really need some help, tried google but no luck. Thanks.


My System SpecsSystem Spec
.
31 May 2016   #2
Taplice

windows 7 Home 64 bit
 
 

Whether all the volumes are Primary partitions?
My System SpecsSystem Spec
31 May 2016   #3
animesekai

Windows 7 Home Premium 64bit
 
 

thanks for the reply, found the solution by restarting the PC XD.!!!!!
My System SpecsSystem Spec
.

Reply

 Merge two volumes(disks) back to one




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
How do i merge hard disks and then split them to bigger size?
http://www.dodaj.rs/f/19/ag/2iEr6zge/slika1.jpg I want to merge C: (windows and all other stuff) with empty D: so I could make C(200gb) and the rest D: disk. I watched some tutorials here and I tried them but it just got unallocated so I can not expand C: an then shrink it to get new D: disk....
Hardware & Devices
Single HDD Showing 2 Volumes (not partitions) cant merge
as the title says i just got two 3TB HDD's and for some reason after 2TB its showing a new volume. any idea how to fix it? shoot me a question for more details if you need it
Hardware & Devices
unable to complete a restore with back up disks/advice
hi guys any help greatly appreciated. i have an advent roma laptop running win 7 home 32bit that has some issues. it keeps getting stuck on system repair for hours on end without any result. i have tried running chkdsk.it gets as far as 50% then hangs like sys repair.at the point when it stops...
Backup and Restore
? about volumes
I'm pretty sure I'm in the wrong category :o but I have a question. In the screen shot, what is the pqservice? And do I have to have that? Also, see in the New Volume, that little sliver? It says its empty, and if I delete it, after a few days it's back. Is that strange? I have several...
Browsers & Mail
How to Merge Volumes/Partations?
i just add my 2nd HDD today that have 3 volumes that's I: (19.53GB) , J: (195.31GB) and K: (17.94GB) and i tried to delete both I: (19.53GB) and K: (17.94GB) using Disk Management so i can add it to I: (195.31GB) but im getting "Access is Denied" i login as admin and it doesn't make any sense...
Hardware & Devices
Converting disks to Dynamic Volumes = no boot
I've done this twice in a row now, so I'm sure it's not a fuke: I install windows 7, convert the disks to Dynamic Disks, and try to reboot. THe result is that the system hangs right after it would normally check to boot from the DVD drives, and before it would start booting Windows. The...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App