What is my next step?


  1. Posts : 3
    Microsoft Windows 10 Pro Build 10586 64-bit
       #1

    What is my next step?


    My first test with all memory came up with errors so I then started the first stick in first slot and came up with no errors. I then proceeded to test stick 2 in slot 2, no errors, stick 3 slot 3, no errors, stick 4 slot 4, no errors. Lucky right? I was assuming now that I had a seating problem so I put everything back in and ran the test again and I already have 1 error in the first pass. All of the other tests above went for 10 or more passes with no errors. Am I doing something wrong? Do I need to still test every stick in every slot to find a problem or is there something I can do differently? What is my next step? TIA
    Last edited by Brink; 11 Jun 2016 at 17:27. Reason: Moved to new thread
      My Computer


  2. Posts : 3
    Microsoft Windows 10 Pro Build 10586 64-bit
    Thread Starter
       #2

    I had put this in a thread about using memtest86+ to test my ram because I have been getting BSOD if that clears anything up. This was moved to a new thread without notice. RAM - Test with Memtest86+
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 02:15.
Find Us