Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Crashes and BSoD with new build

26 Aug 2016   #21
ThrashZone

Win-7-Pro64bit 7-H-Prem-64bit
 
 

Hi,
Good


My System SpecsSystem Spec
.
26 Aug 2016   #22
Skyl3r

Windows 7 Pro 64-bit
 
 

Quote   Quote: Originally Posted by ThrashZone View Post
Hi,
Good
Well, the head banging against the wall isn't over yet.
New PSU and the crashes continue.
New GPU and the crashes continue.

The only way to make it not crash is to not have a GPU at all. This leads me to one of two conclusions:

1. Something about the PCIe slot is misconfigured. This is a Server Motherboard, so it's quite possible.

2. The motherboard is faulty ( )


I'll include MSInfo32 output in case anyone can help me parse this <3

IRQs.
I cut some off, because there's probably 100+ Intel(R) 82574L Gigabit Network Connection IRQs.
Quote:
IRQ 0 System timer OK
IRQ 8 System CMOS/real time clock OK
IRQ 13 Numeric data processor OK
IRQ 14 ATA Channel 0 OK
IRQ 15 ATA Channel 1 OK
IRQ 16 Standard OpenHCD USB Host Controller OK
IRQ 16 Standard OpenHCD USB Host Controller OK
IRQ 17 Standard Enhanced PCI to USB Host Controller OK
IRQ 18 Standard OpenHCD USB Host Controller OK
IRQ 18 Standard OpenHCD USB Host Controller OK
IRQ 18 Standard OpenHCD USB Host Controller OK
IRQ 19 Standard Enhanced PCI to USB Host Controller OK
IRQ 22 AMD SATA Controller (IDE Mode) OK
IRQ 25 High Definition Audio Controller OK
IRQ 52 PCI standard PCI-to-PCI bridge OK
IRQ 53 PCI standard PCI-to-PCI bridge OK
IRQ 54 PCI standard PCI-to-PCI bridge OK

And Conflicts section:
Quote:
I/O Port 0x00000000-0x0000000F Direct memory access controller
I/O Port 0x00000000-0x0000000F PCI bus

I/O Port 0x00000060-0x00000060 Motherboard resources
I/O Port 0x00000060-0x00000060 Motherboard resources

I/O Port 0x000003C0-0x000003DF PCI standard PCI-to-PCI bridge
I/O Port 0x000003C0-0x000003DF AMD Radeon (TM) R9 390 Series

I/O Port 0x00000064-0x00000064 Motherboard resources
I/O Port 0x00000064-0x00000064 Motherboard resources

Memory Address 0xCF800000-0xDFFFFFFF PCI standard PCI-to-PCI bridge
Memory Address 0xCF800000-0xDFFFFFFF AMD Radeon (TM) R9 390 Series

Memory Address 0xFEC00000-0xFFFFFFFF System board
Memory Address 0xFEC00000-0xFFFFFFFF Motherboard resources

IRQ 16 Standard OpenHCD USB Host Controller
IRQ 16 Standard OpenHCD USB Host Controller

IRQ 18 Standard OpenHCD USB Host Controller
IRQ 18 Standard OpenHCD USB Host Controller
IRQ 18 Standard OpenHCD USB Host Controller

Memory Address 0xA0000-0xBFFFF PCI standard PCI-to-PCI bridge
Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF AMD Radeon (TM) R9 390 Series

I/O Port 0x000003B0-0x000003BB PCI standard PCI-to-PCI bridge
I/O Port 0x000003B0-0x000003BB AMD Radeon (TM) R9 390 Series

I/O Port 0x0000C000-0x0000CFFF PCI standard PCI-to-PCI bridge
I/O Port 0x0000C000-0x0000CFFF AMD Radeon (TM) R9 390 Series
My System SpecsSystem Spec
26 Aug 2016   #23
RoasterMen

Windows 10 Pro 64-bit
 
 

Try the graphics card on other computer.
My System SpecsSystem Spec
.

26 Aug 2016   #24
Skyl3r

Windows 7 Pro 64-bit
 
 

Quote   Quote: Originally Posted by RoasterMen View Post
Try the graphics card on other computer.
The second GPU that I tested with and experienced the same problem is a known good GPU from another PC.
My System SpecsSystem Spec
26 Aug 2016   #25
ThrashZone

Win-7-Pro64bit 7-H-Prem-64bit
 
 

Hi,
Bummer bye bye mobo
My System SpecsSystem Spec
26 Aug 2016   #26
Skyl3r

Windows 7 Pro 64-bit
 
 

*snip*
Apologies, double post
My System SpecsSystem Spec
26 Aug 2016   #27
Skyl3r

Windows 7 Pro 64-bit
 
 

Quote   Quote: Originally Posted by ThrashZone View Post
Hi,
Bummer bye bye mobo
I'm contacting the motherboard seller and doing one last reinstallation of Windows on a new SSD. If this doesn't work, I'm returning it and getting a new one.

A friend of a friend said they're absolutely sure it's an IRQ conflict and they'll show me how to fix it when they see me next. I don't know what to think. I haven't dealt much with this before.
My System SpecsSystem Spec
27 Aug 2016   #28
Skyl3r

Windows 7 Pro 64-bit
 
 

Hello Everyone,

I've got good news. The computer is working! It seems to be doing just fine.
I made several observations earlier in the day:
  1. Fairly often when copying files, they get corrupt
  2. On Passmark's Performance Test tool, My GPU was scoring lower than Intel HD 4000 Integrated Graphics

What I did this time was pull my GPU, reinstall Windows on a new SSD and install all motherboard drivers. At this point I got like 2 Memory_Management BSoDs, so I decided to run Memtest86 again. Within 10 seconds of running, it found 10000+ errors.
So I then tested one stick at a time to find the bad one and removed it.
After that I installed the GPU and GPU drivers and since then I've been off to the raced.

I've been working on a bit of an overclock. I've got the system stable to 3.1GHz so far. I'm planning on waiting for water cooling to go much higher though.
My System SpecsSystem Spec
27 Aug 2016   #29
ThrashZone

Win-7-Pro64bit 7-H-Prem-64bit
 
 

Hi,
Good detective work we really should of gotten you to post the BSOD logs so someone could look at them
Blue Screen of Death (BSOD) Posting Instructions

My bad
Your good though
My System SpecsSystem Spec
27 Aug 2016   #30
Skyl3r

Windows 7 Pro 64-bit
 
 

Quote   Quote: Originally Posted by ThrashZone View Post
Hi,
Good detective work we really should of gotten you to post the BSOD logs so someone could look at them
Blue Screen of Death (BSOD) Posting Instructions

My bad
Your good though
Well, I'll say this just in case anyone else might experience the same thing.

I used the defective RAM during the installation of the OS and Drivers and some downloads. When transferring files, they would typically get corrupt. I ended up deciding it might be the ram, but when I removed it I was still getting crashes.

I'm speculating here, but I'm willing to bet that was because of the damage to data that the faulty ram had caused before I removed it. I didn't realize this and determined RAM was not the issue. I wasted 4 days debugging all of the other components and replacing things when in reality it was the RAM.

Run Memtest86 first on ALL memory because you might be able to save yourself a few hundred dollars

But all the same, I'm happy to be up and running and thanks a lot for the help and suggestions everyone here provided!
My System SpecsSystem Spec
Reply

 Crashes and BSoD with new build




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
New build BSOD, blackouts, crashes.
Hi I have been having a lot of problems with a new build, an ASUS B85M-G motherboard and an i5 4570 (1150) processor. I have had one BSOD, several brief blackouts, a few crashes, and some noise from the hard drive, a WD Caviar Black 500GB. The hard drive makes some loud knocking sounds on every...
BSOD Help and Support
BSOD, new build, random crashes
It crashed a couple times running benchmarks, then I updated drivers from the ones on the cd that came with the motherboard to the ones on the website. No more crashes for a day. Now it will just randomly crash and I can't say "every hour" or "every time i run *", I has happened under load, and...
BSOD Help and Support
New i3 Build - Frequent crashes
I am getting frequent crashes with new build, and thank you in advance for any help. Couple of things I have done: 1) updated new OCZ SSD to most recent firmware, 2) tested each memory stick with memtest for 12-14 passes in each slot (4 tests) with -0- errors, 3) ran Verifier on non-Microsoft...
BSOD Help and Support
BSOD - new home build system. Randomly crashes.
Hi. I'm running windows 7 64 bit on a new home build system. Randomly getting BSOD. Specs: ASUS P6X58D-E I7 980 3.33 GHz hex core NVIDIA GTX 470 CORSAID Vengeance 24 GB (6x4GB) 240-Pin DDR3 SD RAM (PC3 12800) HD 600 GB Velociraptor (boot drive) WD caviar 2 TB x 2 storage WD caviar 1 TB...
BSOD Help and Support
First time build - crashes
Hi, I built a system for the first time last year, and it closes down spontanously several times a week, which makes it unreliable for trading, which was what I built it for. I installed a new copy of Window7pro 64 bit onto the new build. The event logs show several different error types, but...
BSOD Help and Support
Need help resolving new 64bit build BSOD/crashes
Hello, everyone. I need some help resolving a problem I'm having on a brand new build with Windows 7 64bit. I purchased all the components from Newegg and installed them myself. The systems specs are: Intel i7 920 2.66 GHz Asus P6T Deluxe V2 Noctua NH-U12P SE2 6GB Corsair Dominator 1600...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App