Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Testing New psu

01 Sep 2016   #1
dorian hawkmoon

Windows 7 Ultimate (x64) SP1
 
 
Testing New psu

My uncle's old psu broke. I needed to upgrade my psu anyway, so I gave him my old one and bought Seasonic S12II 620 Watts. Now, I'm a bit rusty at assembling new pc. The Pc boots up, seems to be okay. But is there any way to see if PC is getting right voltages in different components of the rig? If so, I'll test and post results here. Thank you.


My System SpecsSystem Spec
.
01 Sep 2016   #2
RoasterMen

Windows 10 Pro 64-bit
 
 

My System SpecsSystem Spec
01 Sep 2016   #3
dorian hawkmoon

Windows 7 Ultimate (x64) SP1
 
 

Okay. I'm not sure which ones to save among logs. I'm attaching sensor log and also other software (whichever installers I had on my PC) logs.


Attached Thumbnails
Testing New psu-1.png   Testing New psu-aida.png  
Attached Images
Testing New psu-et6.png 
Attached Files
File Type: txt HWMonitor.txt (24.5 KB, 1 views)
My System SpecsSystem Spec
.

01 Sep 2016   #4
dorian hawkmoon

Windows 7 Ultimate (x64) SP1
 
 

It seems to be okay, what say you? Do I need to any short stress test. Furmark? Prime95? Which modes to run/how long?
My System SpecsSystem Spec
01 Sep 2016   #5
oscer1

win 7 64 bit
 
 

hi the 5v is a little low check what bios has for your voltages.
My System SpecsSystem Spec
01 Sep 2016   #6
dorian hawkmoon

Windows 7 Ultimate (x64) SP1
 
 

BIOS shows no 5v, at least I couldn't find it on my mobo bios. Not even Gigabyte Easytune 6 shows that. Only AIDA and Cpuid Hwmonitor shows that volt. Giving that also


Attached Thumbnails
Testing New psu-img_20160901_225014.jpg   Testing New psu-cuid-hwm.png  
My System SpecsSystem Spec
01 Sep 2016   #7
oscer1

win 7 64 bit
 
 

that's ok not all bios have it. I just do not go by what a program tells you. but you do have a very good power supply one of the best makers of power supplies.
My System SpecsSystem Spec
01 Sep 2016   #8
dorian hawkmoon

Windows 7 Ultimate (x64) SP1
 
 

Then I shouldn't worry? Which cord supplies the +5v anyway? I think I fixed all the cables firmly.
My System SpecsSystem Spec
03 Sep 2016   #9
RoasterMen

Windows 10 Pro 64-bit
 
 

+5v should be operating at around 4.500-5.200v but that's still fine though it's wee-bit lower than what it should be.
My System SpecsSystem Spec
03 Sep 2016   #10
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

ATX Standards is +/- 5%.
My System SpecsSystem Spec
Reply

 Testing New psu




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
PSU Testing
Here is a rewrite of the PSU Test. http://www.sevenforums.com/vip/257690-psu-how-test-3.html#post2130086 Before attempting the following PSU test, power system off and pull the power plug or flip the PSU switch off, whichever applies. Do not open the PSU's case! It can carry a lethal dose of...
Hardware & Devices
testing
just testing to see if i did this sig right or not
Chillout Room
testing a psu
just curious here, i havent got a problem but i was wondering is there some software to test a psu's useage? like how much power its using at any given time. i been thinking about this for years but never seemed to find anything
Hardware & Devices
AV Testing
I took 15 malicious links and loaded them against numerous anti virus software programs. These links were zero day links and were found on various sites on the Internet. Stopped is the number of malware that was stopped by the running anti virus program. Missed means the malware got through. ...
System Security


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:18.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App