Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: how do I know which volume to unshrink

3 Weeks Ago   #1
Ajw

Windows 7 Home Premium 64 bit
 
 
how do I know which volume to unshrink

i reinstalled w7 on a laptop but now it seems I have two O.S.'s both w7, i did some searching and i found that someone else has shrunk the volume which is how I've come to have two operating systems. My problem is how do I know which volume do I unshrink. It seems that one OS has internet and when I load the other one there is no internet.

Computer Management says:
[C:] Simple Basic NTFS Healthy [Boot, Crash Dump, Primary Partition]
Local Disk [D:] Simple Basic NTFS Healthy [Primary Partition]
swap [Z:] Simple Basic NTFS Healthy [Page File, Logical Drive]
SYSTEM Simple Basic NTFS Healthy [System, Active, Primary Partition]

I know the SYSTEM is the start up (is this correct?), and needs to be left. I'm trying to restore to one volume with one OS. When I right click on the swap [Z:] there is no option to delete volume, it also has a green line around it, which I believe is 'Extended partition' but this is obviously the partition this person made, it is the same for C: - no option to delete volume but no green line around it. The only option to delete volume is on the Local Disk [D:], but isn't this the Primary partition with the working OS (with internet) on?
I do hope I've given enough info, I've tried to do a screenshot, but have failed miserably.


My System SpecsSystem Spec
.
3 Weeks Ago   #2
Megahertz07

Windows 7 HP
 
 

Normally the C: drive is the one that you are running Windows.
- In Win 7 the C: partition is the running OS and D: will be for the non running.

For example (may not be your case):
If you boot Win 7 (1), C: drive will be assigned to partition 1, and D: will be assigned to partition 2 for win 7 (2)

If you boot Win 7 (2), C: drive will be assigned to partition 2, and D: will be assigned to partition 1 for win 7 (1)

Please open disk manager, expand the columns and, with sniping tool, take a snapshot. Post here as an attachment. (Go Advanced - Manage Attachments - Browse - Upload)

Disk Management - Post a Screen Capture Image
My System SpecsSystem Spec
2 Weeks Ago   #3
Ajw

Windows 7 Home Premium 64 bit
 
 

Hi Megahertz07, thanks for your reply, here is the screenshot as requested, (I finally managed to save on a flash drive as it wasn't being found when I saved it to the laptop)


Attached Thumbnails
how do I know which volume to unshrink-screenshot.png  
My System SpecsSystem Spec
.

2 Weeks Ago   #4
Ajw

Windows 7 Home Premium 64 bit
 
 

Here is the screenshot of the Computer Management for the W7 (1) without the internet, it looks completely different


Attached Thumbnails
how do I know which volume to unshrink-screenshot-2.png  
My System SpecsSystem Spec
2 Weeks Ago   #5
Megahertz07

Windows 7 HP
 
 

As I explained on post 2, C: drive letter is assigned to the partition that has the working Windows.
What you want to do? Delete the Windows without internet?
My System SpecsSystem Spec
2 Weeks Ago   #6
Ajw

Windows 7 Home Premium 64 bit
 
 

Yes, I want to delete the non working windows then install a fresh copy of windows, and get rid of the logical dive also so that there is only one partition.
My System SpecsSystem Spec
2 Weeks Ago   #7
Megahertz07

Windows 7 HP
 
 

Make a backup of your Data on an external disk. Better be safe than sorry.

- Boot from Win 7 (that has internet) as you did on post 3
- Open Disk Manager
- Right click on the third partition (disk D:) and delete it.
- Right click on the second partition (disk C:) and extend the to maximum.

I won't delete the last partition (swap) because it can be a needed by BIOS that use a Linux program for maintenance. UNLESS you have installed a Linux version on the past.

To reinstall Windows you have two options:
- Make a reinstall. It will only replace Windows, keeping everything else (programs, data etc). To do so, under Windows, put your installation disk on and launch setup. Repair Install
- Do a clean install. Boot from the Win 7 installation disk, go to install, advanced - format the partition (it will clean ALL your partition) and then install on the formatted partition and then install the drivers and restore your data from the backup.

For the updates: MS releases SP2 for Windows 7
My System SpecsSystem Spec
2 Weeks Ago   #8
Ajw

Windows 7 Home Premium 64 bit
 
 

Megahertz07 thank you, I had wondered if it was that easy, but I had read so much about the boot file and possibly needing some software to sort it that I lost all confidence. I'm just in the process of reinstalling w7, drivers and updates. I do not anticipate any more problems but I'd like to keep this thread open until I'm done, thank you once again.
My System SpecsSystem Spec
2 Weeks Ago   #9
Eric3742

Windows 7 x64
 
 

There is maybe a better options for you to choose, instead of re-install again.


Partition: Reference: Post #3.

1. No drive letter. Label: SYSTEM. This is standard in Windows OS.

2. Drive letter: C:\ This is the Windows OS. Leave it alone.

3. Drive letter: D:\ This is the Windows OS without Internet. Remove the Drive letter. To be deleted.

4. Drive letter: Z:\ This may be the Recovery partition, as most laptop will placed in the last partition.
Remove the Drive letter. Rename to Recovery. Not to remove.


This method is to remove the D:\ letter from Windows Explorer.

This D:\ drive is the same as in Post #4 which is the C:\ drive without Internet.
Hence, temporary remove the drive letter.

Do some task &or play with the Computer to check if there is any issue.

Later, after testing for a few days /weeks and there is no problem in the System.
Then you may able to safely delete the partition, which is the 3rd partition.
Then you can use the 3rd partition for data, etc.
Or you can resize to max for C:\ drive to use and include this partition, as one large partition.

One basic rule.

The 1st Partition is reserve for Boot, known as SYSTEM.

The last partition should be the Recovery partition.

Both partition should be set Hidden, as it may not allow you to delete.

This is common for laptops setting WITHOUT any Recovery discs.


Edit / Added:
It is better to delete the 3rd partitions.
This is to avoid in case somehow that partition start to take over the system.
That is to say that you (or someone) add the drive letter and cause interference to the system.



This is how i normally play with these type of setting &or partitions.
My System SpecsSystem Spec
Reply

 how do I know which volume to unshrink




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Does Deleting USB HardDrive(Volume)Revert It To Inactive Volume
Have an external USB hard drive caddy with a naked Raptor drive sitting in it which has one partition that is the entire capacity of the Raptor drive...this is an 'active' volume. 1. Can someone tell me if I delete the volume under Computer Management>Disk Management>Delete Volume will this...
Hardware & Devices
Encrypted Volume Check: Volume Info on \\?\Volume{X}Can't read
Encrypted Volume Check: Volume Info on \\?\Volume{X}Can Not Read Found this in my Event Viewer on each start/restart. I don't have any Volumes that I have encrypted. Is this malware? I've run everything prior to noticing including Windows Offline Defender. Not sure if this is even the...
General Discussion
Volume not loud enough - how do I bypass volume limit?
I like to listen to music loudly sometimes. I have both the volume mixer and my application's volume set to maximum levels, but it's not loud enough for my liking. Is there any way to increase the maximum sound volume in Win7?
Sound & Audio
Soft Recording volume with Blue Yeti, increasing volume distorts audio
So I have a Blue Yeti, and I'm an online animator/voice actor. Whenever I record audio on my Blue Yeti (OR any other mic) I record about 4-6 inches from the mic, and turn the gain down enough that the audio doesn't peak as I yell or whatever. This is what you're supposed to do if you don't want...
Sound & Audio
Using Disk Manager, need to unshrink and reclaim Disk 0 space
I'm not sure how I ended up like this, but using Computer Manager > Disk Manager, I ended up with my disk 0 as follows: System Reserved 85MB NFTS Healthy (System, Active, Primary partition) 16MB Unallocated System (C)
General Discussion
Extremely low volume on headphones but high volume on speakers
y0 I got this other problem i really hate. The most. Please jonathan_king, zigzag reply please. I beg you, i got this problem that i plug in my headphones and its extremely low volume. It use to work fine, but now nope. I tried the jacks on the front, back and my monitor. Please help me.
Sound & Audio


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:39.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App