Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: I8kfanGUI settings?

2 Weeks Ago   #1
Alexey2912

W7 Pro 32bit
 
 
I8kfanGUI settings?

Do these settings look fine or need to be changed?

Thanks.




Attached Thumbnails
I8kfanGUI settings?-df.png   I8kfanGUI settings?-df1.png   I8kfanGUI settings?-df2.png   I8kfanGUI settings?-df3.png   I8kfanGUI settings?-df4.png  

I8kfanGUI settings?-df5.png   I8kfanGUI settings?-df6.png  
My System SpecsSystem Spec
.
2 Weeks Ago   #2
Digerati

Windows 7 Profession 64-bit
 
 

I am not familiar with that particular monitoring programs but everything looks fine to me except in the first image where it shows the state of your CPU and GPU fans are up in the mid 70,000 RPM range. That's impossible so I don't know what it means, nor do I know what the 0 means next to those high values.

At any rate, I see you have everything set to Automatic and I recommend you leave it there. But I also note your CPU is near idle at 9% utilization so you need to make sure your temps are still acceptable when the computer is being taxed too.
My System SpecsSystem Spec
2 Weeks Ago   #3
Alexey2912

W7 Pro 32bit
 
 

Thanks, I shall keep you posted, once I make changes of fan speeds. Have options of Off, No change, Slow and Fast, and see where fan RPMs and CPU loads are.
My System SpecsSystem Spec
.

2 Weeks Ago   #4
Digerati

Windows 7 Profession 64-bit
 
 

Quote:
once I make changes of fan speeds
Why? I recommend you don't dink with them. If not broken, don't fix it!
My System SpecsSystem Spec
1 Week Ago   #5
Alexey2912

W7 Pro 32bit
 
 

Hi,

Do these look better?

Thanks.


Attached Thumbnails
I8kfanGUI settings?-df.png   I8kfanGUI settings?-df2.png   I8kfanGUI settings?-df3.png   I8kfanGUI settings?-df6.png  
My System SpecsSystem Spec
1 Week Ago   #6
Digerati

Windows 7 Profession 64-bit
 
 

As I noted before, except for impossible fan speeds everything looked fine to me. Now your fan speeds are 2410 and 1991RPM which look totally realistic and reasonable now. And your temps still look fine.
My System SpecsSystem Spec
1 Week Ago   #7
Alexey2912

W7 Pro 32bit
 
 

Thanks for your expert comments, which I appreciate. Do the temp and fan settings look fine, to turn ON and Off?

One reason for using this app, is that have fried 3 Nvidias prior to this, so am trying to be careful.
My System SpecsSystem Spec
1 Week Ago   #8
Digerati

Windows 7 Profession 64-bit
 
 

I don't know what you mean by look fine to turn on and off. As I noted before, I would just leave things alone.

If you fried 3 graphics cards, I would look at your PSU.
My System SpecsSystem Spec
1 Week Ago   #9
Alexey2912

W7 Pro 32bit
 
 

Bad habit, of using the lap laying on carpet, resulting in less or none ventilation.

Now when its life is almost over am trying to take care of it.....gotta new Nvidia GeForce 512 MB GTX.

On the left reading fan turns off and next to it turns on....along with the speed.
My System SpecsSystem Spec
1 Week Ago   #10
Alexey2912

W7 Pro 32bit
 
 

I made a few changes too, separated the fans for CPU and GPU, must have noticed.
My System SpecsSystem Spec
Reply

 I8kfanGUI settings?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Cannot see Multimedia Settings under "Change advanced power settings"
I have already clicked "Change settings that are currently available" but it still does not show it, restarted the PC and still same result. MSE disabled Windows 7 Starter 32-bit Power Plan: High Performance System Model: HP Mini 110-3500
General Discussion
mem settings
Hi all well after huge help from essenbe and Bigmck and others that helped me set up my ssd drive i now want to check as i followed a youtube video to overclock my Q660 is now puring from 2.4 to 3.2 .Just a question please on the ram in the cpuz program i see my ram as per screen shot .just...
PC Custom Builds and Overclocking
Hello, help with DPI settings please
Hi to all. i am very glad to find you. Ididnt know about your foroum until i needed you, so that makes me want to thank u in advance. i accidently caused a problem to my cousins laptop. the laptop is ACER Aspire 5732Z - 434G50Mn dual core at 2.1 GH. Cousin uses windows 7. The problem: we needed...
General Discussion
Windows 7 Regional Settings and Office 2010 Language Settings
I need to know if the Windows 7 Regional settings has any affect on Office 2010 language settings. If so, how? Heather
Microsoft Office
UAC settings
Is there a way to set the UAC to automatically elevate privilages on selected programs. I want to be able to use jkdefrag and ccleaner without having to give it permission to run every time I click on it, but I don't want to completely disable UAC either
System Security


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:43.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App