Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Can't connect IDE hard drive to SATA motherboard

23 Dec 2009   #1

Windows 7 Home Premium
 
 
Can't connect IDE hard drive to SATA motherboard

I have a problem and it's driving me nuts. I am new to Windows 7 and I'm not sure if I am missing a setting, in 7, to get this to work. Here's the problem.

I just bought an HP system (see specs) with SATA connections only. I have an IDE drive from my Windows XP system that I would like to install in my new system. I have tried a controller card and an adapter. Neither have worked. When I start the system, I get to the start up screen that gives me the option of entering BIOS, Boot Menu, and a couple others. Lately, it just stays there. If I leave it alone, it will go no farther. If I select either of the options, it says, "enter xxxx....", but it goes no where. If I disconnect the drive, it starts up normally. When I can get into BIOS, the drive is recognized and the original drive is set as the first to boot. I have even tried all the SATA Controller settings (IDE, RAID, AHCI) and nothing.

There had been a few times that I actually reached Windows, but the drive was listed as unallocated and I could do nothing with it. If I tried, I got the error message "Device not ready". Unfortunately, I can't even get that far anymore.

A format was suggested, so I copied all my data to my external drive and formatted in XP. No luck. I keep hearing that either setup should work, but it doesn't. The system is completely updated and the drivers for the controller card are the Windows 7 drivers from the manufacturer. Any thoughts on what to try? I do want this installed internally, not by USB. Thanks!

Mike

My System SpecsSystem Spec
.

23 Dec 2009   #2

Windows 7 Professional x64
 
 

When you say you have tried a controller card do you mean a PCI card?

Same with "adapter" is it an IDE to SATA adapter that connects to the drive itself?

I am wondering if you need to change a PCI setting if it's a PCI card controller.
My System SpecsSystem Spec
23 Dec 2009   #3

Windows 7 Home Premium
 
 

nate42nd,

Yes, the controller card is a PCI card. The adapter is a IDE to SATA adapter that connects directly to the drive. As far as a PCI setting, I'm not sure I would know where to find that.

Mike
My System SpecsSystem Spec
.


23 Dec 2009   #4

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

Have you tried to do a Windows Update online with the PCI card & the IDE HD connected ?


" Doc "
My System SpecsSystem Spec
23 Dec 2009   #5

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 



Attached Images
 
My System SpecsSystem Spec
23 Dec 2009   #6

Windows 7 Ultimate (32 bit)
 
 


DocBrown you beat me to the punch. I also was going to mention that SATA to EIDE converter.

Here is a link to another location for a similiar card.
Sabrent Serial ATA Controller Sabrent SBT-SCIDE Serial ATA to IDE Ultra ATA-100/133 Mini Converter-Best Computer Online Store Houston Buy Discount Prices Texas-Directron.com



Here is another NewEgg
http://www.newegg.com/Product/Produc...-002-_-Product
My System SpecsSystem Spec
23 Dec 2009   #7

Windows 7 Home Premium
 
 

Doc & IggyAZ,

The problem is that I can't get into Windows with the drive connected. As far as the adapter, this is similar to what I have.

Mike
My System SpecsSystem Spec
23 Dec 2009   #8

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

Quote   Quote: Originally Posted by Minnesotamike View Post
Doc & IggyAZ,

The problem is that I can't get into Windows with the drive connected. As far as the adapter, this is similar to what I have.

Mike

What is the jumper setting on the IDE HD connected to the adapter ?


" Doc "


Attached Images
 
My System SpecsSystem Spec
23 Dec 2009   #9

Windows 7 Home Premium
 
 

Doc,

I tried every possible setting. I was told to use Cable Select though.

Mike
My System SpecsSystem Spec
23 Dec 2009   #10

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

I have used the Tri-Head USB IDE adapters on a regular basis to test various IDE drives. I always have to set the jumper to master or single drive to work. I have have not tried one of these SATA adapters yet.

When it is connected, can you see it recognized in the bios setup ?

" Doc "
My System SpecsSystem Spec
Reply

 Can't connect IDE hard drive to SATA motherboard




Thread Tools



Similar help and support threads for2: Can't connect IDE hard drive to SATA motherboard
Thread Forum
Motherboard detects Sata SSD drive but not normal sata drives. Hardware & Devices
C Drive Connected to Motherboard SATA Connector 3 Instead of 0. Installation & Setup
Can I connect a SATA drive to an ESATA port? Hardware & Devices
How do I transfer files from bad sata hard drive to new hard drive Installation & Setup
Install Windows 7 with Sata Hard Drive and IDE DVD ROM Drive Installation & Setup
Sata Hard drive Hardware & Devices
Hard Drive Dissapears after installing 2nd SATA Drive Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:25 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33