Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: No Channel 0?

17 Feb 2010   #11
Microsoft MVP

Win 7 Ultimate x64

While you're at it you can also disable anything else that isn't being used if you haven't already; serial port, floppy controller, etc. Just remember to uninstall them in Device Manager before disabling them in the bios (uninstall and then disable on the reboot).

My System SpecsSystem Spec
17 Feb 2010   #12

Windows 7 Ultimate (x64) SP1

Yeah...done all that. Thanks. Now I want my SSD back!! It died after a week and the supplier has just contacted me about a replacement
My System SpecsSystem Spec

 No Channel 0?

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Any drawbacks to mixing single-channel and dual-channel for RAM?
Hi, I currently have 2x2GB Corsair DDR3 1333MHz RAM which I had bought around 3 years ago. I am currently thinking of upgrading to 8GB. However, my vendor tells me that 2GB sticks are no longer available for Corsair and that I have to either get a 4GB or 8GB stick. My current 2x2GB runs in...
Hardware & Devices
Single channel VS Dual Channel RAM performance boost?
Hi.. So as usual im an idiot and i looked into my case and am still debating if my ram really should sit right next to eachother and i started Speccy and it said that i had single channel ram 2 different channels with 16GB total. I got confused becouse the motherboard manual said i should put the...
Hardware & Devices
Single channel DDR2 but can run Dual channel
Hi, My system is abit IP35 quad core 2 q6600 running 4gb of RAM, all the same spec. Win 7 64bit and Win 7 32 bit partitions. I recently added 64 bit partition to run more RAM, so the slots 2 and 4 will have gotton dust in it as it was unused for ages. If I wiggle the slot 4 in sometimes...
Hardware & Devices
Dual Channel Suddenly Stopped Working, Only Single Channel Remains
Hey everyone I got a bit of a problem here, and I'm at a loss on what to do to fix it. Some background about the situation would be a good place to start. A few days ago I came home from work and found my PC in a "lights are...
Hardware & Devices
RAM: Single Channel to Dual difference?
hi all, recently it came to my notice that i was running my RAM on single channel mode (2x2gb) on my dh67bl mobo. i saw it in cpu z and it showed single channel. So, i changed my ram and placed it in identical slots and now the Cpu z shows dual channel RAM. but i don't see any visible...
Hardware & Devices
Channel 9 to swallow Channel 8, Channel 10, Coding4Fun
Channel 9 is being renamed "Revolution 9," which will swallow up the Channel 8, Chanel 10, and Coding4Fun websites. Full Story: Channel 9 to swallow Channel 8, Channel 10, and Coding4Fun - Ars Technica

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:19.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App