Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Attempting to repair boot failure?

16 Mar 2010   #1

Attempting to repair boot failure?

I'm in the process of rebuilding the windows 7 bootloader. After trying command 4 it says (Scanning all disks for windows installations. Successfully scanned windows installations. Total identified windows installations: 0 The operation completed successfully. What's the difference between a volume and a partition? In diskpart when i select disk 0 and list partitions it lists 2 partitions one being system reserved the other being the main windows partition. When i list volume though the main windows volume doesn't exist in the list? *edit 20min later* I've determined that one disk 0 partition 2 which is the windows partition, it is not associated with a volume. Only partition 1 is associated with a volume. That means the windows partition doesn't have an assigned drive letter. I have tried to assign one, but you have to specify a volume, yet it doesn't exist. Understand? Help would be highly appreciated. What i'm doing now is backing up the windows partition and then delete the partition then re-create and apply the backup to the new partition.

1.) bootrec.exe /fixmbr

2.) I:\boot\bootsect.exe /nt60 all /force

3.) del C:\boot\bcd

4.) bootrec.exe /rebuildbcd

My System SpecsSystem Spec
17 Mar 2010   #2

Windows10 Pro - 64Bit vs.10547

I don't usually mess with the HDD's - but I have used this little program before
- it might be worth trying:
Easeus Partition Master Home Edition - Free software downloads and software reviews - CNET
My System SpecsSystem Spec
17 Mar 2010   #3


FIXED - Used Acronis True Image to backup only partition #2, Leaving the System reserved in tact. Deleted partition #2 from the disk. Then used acronis to recover using the backup, this time not using the original backed up MBR. Put it back in, windows 7 was able to repair the problem automatically. Now here i am! damn i'm good!
My System SpecsSystem Spec


 Attempting to repair boot failure?

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Boot failure error 0xc000000f win7 | cannot auto-repair
Hi there, i went on break for about 2 weeks, and upon starting up my machine started getting a bsod for unmountable boot volume. tired to restart in safe mode, but none of the options were working , selecting anything would just loop back to the same bsod over & over. i had a recovery...
Backup and Restore
Windows 7 boot failure: error ‘0xc0000225’: can't repair or reinstall
Hi guys I’d be very grateful for a bit of help please. My 3 year old Samsung RV720 laptop wouldn’t boot into Windows 7 today – , was fine yesterday, but today it just hung at the Win7 startup logo.
General Discussion
Win 7 Boot failure, repair does not work
Hello Everyone, I have Medion akoya laptop with 64bit Windows 7 installed. Lasptop was working fine until last day. When i started it today it suggested to go to System repair (recommended). It showed one file loading bar then screen went black. After couple of minutes windows startup blue scree...
General Discussion
startup repair 16 hrs latter still attempting repair
ok HP computer don't want top loose data if possible wont start up even in safe mode goes into startup repair and stays there so far 16 hrs : so is there a way to repair the operating system or start up dir , remember it don't come with win operating cd , dont want do complete restore unless have...
Backup and Restore
Windows 7 Ult 32b boot failure; system repair unable to find install
In an attempt to remove a virus, I made some changes to my registry (after saving a backup of it) using CCleaner. Upon restart, my computer failed to boot; the windows logo appeared for a few seconds, as usual, then a blue error screen flashed, and before I could read it the system restarted. Now...
BSOD Help and Support
Failure when attempting to copy boot files
Operating System: Windows 7 Professional 64 bit Laptop: Lenovo X301 Problem: Failure when attempting to copy boot files Morning All I keep getting Failure when attempting to copy boot files when running the following command after imaging a new laptop: D:\Windows\System32\bcdboot...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 00:52.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App