What Temps do you get with AMD PhenomII 965?

Page 2 of 3 FirstFirst 123 LastLast

  1. Posts : 795
    windows 7 RTM x64
       #11

    pcgamer said:
    ccatlett1984 said:
    Um, water cooling does not have to be complicated.

    If you have a 120mm fan hole check out the following product.

    ECO A.L.C.

    I have it in my system with a 965.

    It idles @ 30C
    Full load is ~37C
    This is with a system temp of 27C
    wooh thats really good temps for my cpu to run at and is good how much did the cooler cost?
    $75

    That includes the 120mm fan the system uses to cool the radiator. (Its not an el-cheapo fan either)
      My Computer


  2. Posts : 26
    Windows 7 RTM x64
       #12
      My Computer


  3. Posts : 187
    Windows 7 Pro 32Bit
    Thread Starter
       #13

    i may move to water cooling later on in the year when i have more money to spend on upgrading my PC but i think i will try 1 of the before mentioned air cooling 1s for now as i hope this should stay cool enough while gaming
      My Computer


  4. Posts : 795
    windows 7 RTM x64
       #14

    I can understand the price issue.
    This was my last cooler.
    Newegg.com - Thermalright TRUE Black 120Rev.C CPU Cooler - CPU Fans & Heatsinks
      My Computer


  5. Posts : 187
    Windows 7 Pro 32Bit
    Thread Starter
       #15

    Here are the images of the inside of my pc to show what the airflow is like.



    Hope these come out ok and give you an idea of what im working with.
      My Computer


  6. Posts : 289
    Windows 7 Ultimate x64
       #16

    pcgamer said:
    I recently got the AMD Phenom II 965 and was not to impressed with its temp results. I idle at 40c and hit 64c on full load using stock cooling when it is only suppose to go to 62c safly. I just wanted to know what everyone elses temps are like and what cooling you use as i am tempted to return this CPU and go back to an intel CPU.
    is cool and quiet turned on?
      My Computer


  7. Posts : 289
    Windows 7 Ultimate x64
       #17

    pcgamer said:
    Here are the images of the inside of my pc to show what the airflow is like.



    Hope these come out ok and give you an idea of what im working with.
    in general the wire management is ok, but you can do some better hiding for those wires, especially the 2 sata cables (1st thing i saw)
      My Computer


  8. Posts : 6,879
    Win 7 Ultimate x64
       #18

    kurahk7 said:
    in general the wire management is ok, but you can do some better hiding for those wires, especially the 2 sata cables (1st thing i saw)
    As kurahk7 said it isn't too bad with the wires, but every little bit helps. Stuffing the unused or any excess inot an unused drive bay helps.

    Would also help to replace the two missing slot covers. I would also look at replacing that 80 mm fan in the back with a 92 mm (looks like that is what it will take) with the highest airflow (CFM) and lowest noise (db) you can find.Also from your listed specs,

    Cooling AMD Stock Heatsink, 120mm Blue Front fan, 2x80mm exhaust fan

    where is the second 80 mm? One reason for mentioning replacing the 80 mm with a bigger fan is that with a 120 mm in the front and an 80 mm in the back, you have more air going in than going out, allowing the air to heat up more before it is expelled.

    One more thing, the power supply. Is there a fan on the top of it (as it is installed) at the top of the case, or only one at each end of it? If there is one at the top, turn the power supply the other way around so that fan is facing down, will help with drawing extra heat out.
      My Computer


  9. Posts : 187
    Windows 7 Pro 32Bit
    Thread Starter
       #19

    stormy13 said:
    kurahk7 said:
    in general the wire management is ok, but you can do some better hiding for those wires, especially the 2 sata cables (1st thing i saw)
    As kurahk7 said it isn't too bad with the wires, but every little bit helps. Stuffing the unused or any excess inot an unused drive bay helps.

    Would also help to replace the two missing slot covers. I would also look at replacing that 80 mm fan in the back with a 92 mm (looks like that is what it will take) with the highest airflow (CFM) and lowest noise (db) you can find.Also from your listed specs,

    Cooling AMD Stock Heatsink, 120mm Blue Front fan, 2x80mm exhaust fan

    where is the second 80 mm? One reason for mentioning replacing the 80 mm with a bigger fan is that with a 120 mm in the front and an 80 mm in the back, you have more air going in than going out, allowing the air to heat up more before it is expelled.

    One more thing, the power supply. Is there a fan on the top of it (as it is installed) at the top of the case, or only one at each end of it? If there is one at the top, turn the power supply the other way around so that fan is facing down, will help with drawing extra heat out.
    the 2nd 80mm fan is a side exsuast 1 and the psu only has a fan at the back i'll be covering the to expansion bays soon and will try to hide the cables better and i have an artic cooler pro rev 2 coming in the morning.
      My Computer


  10. Posts : 6,879
    Win 7 Ultimate x64
       #20

    Turn that 80 on the side to intake. It doesn't help much when it is pulling air from the front before it even has a chance to pass the CPU and video card. General rule for case fans is; front and sides, in; back and top, out.
      My Computer


 
Page 2 of 3 FirstFirst 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:32.
Find Us