Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: nf4 lanparty ultra-D

11 Jun 2010   #1
rizzir

windows 7 home premium 64 bit
 
 
nf4 lanparty ultra-D

im recently having issues booting up into window's or even getting to the bios i sent my computer in to be fixed all 4 led light's are red and stable and they can't figure out the problem the only thing they said was that the bios chip might be corrupted im wondering if anyone here know''s anything i can do to fix it and im wondering if i just buy the same motherboard and put the ram and cpu i have in it along with my graphic's card or is it worth bying the motherboard cause they don't know if the ram and cpu are fried with it as well if someone could get back to me asap would be muchly appreciated!


My System SpecsSystem Spec
.

11 Jun 2010   #2
bobkn

Windows 7 Pro X64 SP1
 
 

This forum is intended for issues related to systems running Windows 7. I see that you're on XP. (I also see that you like run-on sentences.)

That said, I don't know what to suggest. The Lanparty UT NF4 Ultra-D is a fairly old (2005) Socket 939 board. I think eBay may be where you'd have to go for a replacement motherboard, or a replacement BIOS chip. (Both the board and the chip are listed on eBay.)

If you'd like to try just updating the BIOS, the latest version is 406, from April of 2006:

DFI LANParty:The Best OC Platform! Overclock, Motherboard, Intel, AMD

I suggest using a floppy-based version, as it's safer than flashing from Windows.

Good luck.
My System SpecsSystem Spec
Reply

 nf4 lanparty ultra-D




Thread Tools





Similar help and support threads
Thread Forum
pc build ok for Bf4 on Ultra?
Hey there just wondering if there was anything wrong about this pc build. Is that good enough to play BF4 on Ultra and any other game i throw at it. Take a look for your self.. AMD FX-8350, Gigabyte GeForce GTX 770 - My Custom Build 2 buy this one AMD - jamzyboi's Saved Part List -...
Gaming
Ultra Book?
So what target demographic is this device supposed to marketed? Cause I find it difficult to see who would actually need one of these if you've already got a laptop and a tablet. Who's mostly buying these? What's the typical usage?
Chillout Room
PowerDVD Ultra v 8
I just attempted to play a Blu Ray movie for the first time, but PDVD popped a couple of errors. The first said that it needed to update to continue playing disks, the second was for setting the region and a third was the cryptic error below. I'm under the impression that this version of PDVD...
Software
Need help installing win7 on a DFI Lanparty DK P45-T2RS plus
I'm basically stuck mid part where the installer is searching for components/drivers, it tells me i can safely remove the win7 installer from the dvd-rom drive and mount the drivers in it, after which i don't know what to do :cry: there are drivers appearing on this huge white box and i clicked...
Installation & Setup
Ultra VNC Viewer
Hello! I installed Ultra VNC Viewer. After installing I ran the program and checked "Remove Aero (Vista)" for more performance. My theme automatically changed to classic theme and I cannot put back my old theme. I unchecked "Remove Aero" and it didn't work. I replaced my aero.mss with my back up....
Customization
DFI Lanparty GF9400-T2RS Drivers
I have just built my very first computer and installed windows 7 on it. I have run into a slight problem, the driver setup they sent me isn't compatible with Windows 7. When i put in the CD a setup message tells me, "The main board is not supported with this operating system. The application will...
Drivers

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:26.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App