Disable "Scan and fix removable disk" prompt


  1. Posts : 12
    windows 7 ultimate x64
       #1

    Disable "Scan and fix removable disk" prompt


    Apologies if this is mentioned elsewhere, or if I'm posting in the wrong group but...

    Is there a way to stop the "Do you want to scan and fix Removable Disk (X:)?" prompt every time I insert a flash drive? Doesn't matter if it's an SD card in the reader, a thumb drive, or my android phone acting as a storage device.

    Each time I have to click "continue without scanning". Maybe I've just been lucky and have dodged a bullet by not scanning and fixing (recommended) - or maybe, MS is on a hair trigger?
      My Computer


  2. Posts : 53,363
    Windows 10 Home x64
       #2

    Ive seen that attributed to not using "Safely Remove Software", but rather just pulling the device from the USB plug. But that doesn't seem to be the fix.

    Many have had luck running chkdsk on the drive(s)

    Open a command prompt, type in:

    chkdsk L: /f

    L: being your actual drive letter

    A Guy
      My Computer


  3. Posts : 12
    windows 7 ultimate x64
    Thread Starter
       #3

    Thanks AG. The problem is that I switch these storage devices from countless computers - and none of them are safely ejected when they're removed.

    It's only when they're plugged back in that Win7 screams at me. You'd think there'd be some switch to turn that off (like the option to disable auto play).
      My Computer


  4. Posts : 53,363
    Windows 10 Home x64
       #4

    Did you try running chkdsk on them? No off switch because 7, at least, thinks that they need to be scanned. I get it myself, but don't use them enough to be a hassle. A Guy
      My Computer


  5. Posts : 1
    Windows 7 Home premium 32bit
       #5

    I found a solution here :Disable Do You Want To Scan And Fix Removable Disk, AutoPlay

    Basically, disable Autoplay by stopping the Shell Hardware Detection service from automatically starting.
      My Computer


  6. Posts : 53,363
    Windows 10 Home x64
       #6

    Welcome to Seven Forums steveblack. Thanks for that, some may want to use it :) I didn't suggest that as, and it says so in the article, it does disable all autoplay. Some prefer that anyway to prevent infections from removable devices though. All in all, a good option for anyone who prefers to do so. A Guy
      My Computer


  7. Posts : 3
    Windows 7 Professional 64-bit
       #7

    I actually re-formatted my flash drive to try and get rid of the message, but I still get it. I also ran "Scan and fix", to no avail. It found nothing wrong. Meanwhile, I continue to use the flash drive daily with no problems or corrupted files.

    I'm going to try disabling Autoplay as suggested above. I don't like Autoplay anyway.
      My Computer


  8. Posts : 130
    Windows 7 Ultimate x64
       #8

    Sometimes the original pop up still exists.. you need to disable all services.
      My Computer


  9. Posts : 3
    Windows 7 Professional 64-bit
       #9

    Removing flash drive without "Ejecting"


    I previously said that I had re-formatted the flash drive and it did not get rid of the "Do you want to Scan and Fix" error message. Well, after trying to disable Autoplay by stopping the Shell Hardware Detection service from automatically starting, I found that another program needed that service, so I once again tried to re-format the flash drive. This time it worked, and continues to work as long as I religiously use the "Eject" menu item before pulling the flash drive out. However, I pulled flash drives out without using "Eject" for years without incident, when I was running Windows XP. As long as you don't interrupt a file copy operation, there was never a problem. So why is Windows 7 different in this regard? And when you allow Windows to "Scan and Fix", why doesn't it fix anything?

    I like Windows 7, but some changes are not improvements. This is one. Another change I don't like (while I'm on a rant) is changing "Printers and Faxes" to "Devices and Printers" in Control Panel. The average user usually needs printers more than other devices (in my opinion) so why not call it "Printers and Devices"? That's a minor complaint, but change for the sake of change is not useful.
      My Computer


  10. Posts : 1
    Windows 7 32bit
       #10

    Free Program Worked for Me


    There is a simple command line prompt for your removable drives, like flash drives
    chkdsk E: /f ; E: being the drive letter of the USB stick
    as explained at
    http://www.autohotkey.com/board/topi...g-usb-scan-fix down the page at http://pages.citebite.com/n3h7y9w4h7ccw

    If that does not work, then there is a free program "Hide-it" that worked for me. It is available through
    http://www.expocenter.com/hideit
    The program works without installation. Just open it and, after you put in a removable drive, you would double click on the Hide-it icon in your tray and it will open up. You will see the titles of all of the windows that you have opened. The one that is the removable drive is called "Microsoft Windows". You would click on that line and an "H" will go on the left of that line to signify that it is to be hidden. Then hit "configure" and check before "Previously hidden windows" and hit "Ok" twice to put the "Hide-it Program" icon back in your tray. Then, in the future, whenever you put in a removable drive, the annoying Windows pop-up will open minimized and, therefore, you can easily ignore it. When you remove that removable drive from your usb port, the Windows pop-up will disappear.
    Last edited by harvey108; 13 Oct 2014 at 00:16.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 19:17.
Find Us