Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Please help: Installation stops at "Expanding Windows Files 0%"

05 Sep 2010   #1
yangust

Windows 7 Ultimate 32 bit
 
 
Please help: Installation stops at "Expanding Windows Files 0%"

Hello, this is driving me crazy so if you happen to know something or someone who knows something about this, please help:

this aftertnoon I tried to re-install some games on my desktop computer (a recently assembled computer with intel i3 cpu, kingston ddr 3 2gb memroy chip*2, western digital 1 TB HDD, and Pioneer DVD RW, running on windows 7 ultimate 32 bit) because I couldn't load my saved games properly, but I put my game disc in the DVD ROM, during the installation I had numerous instances of "corrupt data source" or "I/O Error" and the like. I had no such problem the first time I installed the games using these discs (about 1 month ago), I tried putting these discs in my other laptop everything went smoothly. I suspect it is something wrong with my OS so I started to re-install windows 7 (probably the worst mistake I made this week). i inserted the windows 7 disc, everything was fine at the beginning, computer loaded the files, went into installation screen, i selected the language & locations, accepted license agreement, selected the partition to install, then clicked next, this is where problem started: loading windows files finished immediatley, but expanding windows files took forever ! It stayed at 0% for like 10 minutes I thought maybe this is how it was supposed to be so I left it there and went to the market. I was back 1.5 hour later and it was at 1%. I thought this was rediculous so I powered off the machine and ran the installation disc again, same problem. I used the same disc on the same computer 2 months ago and everything was smooth! I tweaked my BIOS here and there and re-run the installation a few times the problem persisted. So if someone have experienced similar problems or know what caused this, please help. I suspect it's either a problem with the DVD ROM or memory chips, I'm considering buying new ones to replace them.

Forgot to mention, the computer was running smoothly before except for one minor issue: everytime I start the machine after it has been powered off for longer than 10 hours (estimated), it gave an error or blue screen while entering windows 7 welcome/logon screen. If it's only been powered off for a few hours, I don't get this problem. And when I get the problem, pressing 'reset' button only sends it in an endless loop of the same pattern, I had to power off and then power on again, then the computer runs smoothly like nothing ever happened. I've had this problem since day 1 (2 months ago) and tried numerous means but never managed to get rid of it. Because it wasn't too great an issue, and I couldn't even demonstrate it to my vendors because I bought parts and assembled them myself, and couldn't figure out which part is causing this (also because I have to leave it powered off for a fixed amount time and then press start for this problem to occur), I sort of learnt to live with it. But now i suspect it might also be the memory chips.

And my system specs is here:
Intel i3 CPU on Intel H55 Motherboard,
2 x Kingston DDR3 2GB Memory chips (which i suspect is causing the problem),
1 Western Digital 1TB HDD (SATA),
1 Pioneer DVD RW (IDE) ,
1 ATI HD5770 Graphic card (PCI-E)


My System SpecsSystem Spec
.

05 Sep 2010   #2
DocBrown

Win7 Enterprise, Win7 x86 (Ult 7600), Win7 x64 Ult 7600, TechNet RTM on AMD x64 (2.8Ghz)
 
 

My System SpecsSystem Spec
05 Sep 2010   #3
myzr7

Windows 7 Ulti. x64
 
 

Yangust Welcome to sevenforums
Take out a stick of your ram and try to install. If no luck switch out with the other stick. Good luck to you with your problem.
My System SpecsSystem Spec
.


05 Sep 2010   #4
gregrocker
Microsoft MVP

 
 

Are you booting the WIn7 DVD to try reinstall?

WHere did you get Win7 install DVD? Did you burn it yourself? Is it possibly dirty now? Can you burn another at 4 x speed with ImgBurn.

Test your RAM using memtest86 CD for 5-6 passes or overnight. Remove all but 2gb of Ram to try install, then swap RAM sticks.

Next test your HD using maker's full diag/repair CD scan: Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp. Check all cable connections, swap cables.

Do you have latest BIOS version update? If not install it now from OS. If so, then reset the CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS Set SATA controller to AHCI in BIOS setup.

If you have a REcovery partition, try running it from Boot using steps in Manual. Make any Recovery disks from your Recovery partition, then try wiping your HD to clean reinstall from DVD which should autostart: SSD / HDD : Optimize for Windows Reinstallation
My System SpecsSystem Spec
Reply

 Please help: Installation stops at "Expanding Windows Files 0%"




Thread Tools





Similar help and support threads
Thread Forum
Windows 7 Installation frozen at "Expanding Windows Files (0%)"
Hello. This is my first post here; so I hope I am not breaking the rules by posting a help thread immediately after registration. I'll basically describe what has happened today with my PC. I was originally running Vista, but then I decided to upgrade to Windows 7 with a new hard drive. My issue...
Installation & Setup
Windows 7 x86 and x64 installation stuck at "Expanding Windows Files"
Hello, cheers to all of you who are trying to help! Like the title says, I'm trying to install Windows 7 on Toshiba Equium and every time setup stops on the "Expanding Windows files (0%)". I've tried to google the solution but not a thing I tried helped. Been there, done that list: Memtest...
Installation & Setup
Windows 7 install stuck at 0% on "expanding files" but works off USB
I torrented a windows 7 install disc iso. I burned it to a disc but when i tried to install windows 7 it gets to "expanding files" and freezes at 0% . After that i tried using the exact same iso but from a thumb drive, and it worked. I tried the disc on multiple computers and it always sticks at 0%...
Installation & Setup
Setup freezes at "Expanding Windows files" and a little more...
I wanted to install Windows 7 x64 Ultimate onto my brand new computer and the installer freezes every time at the "Expanding Windows files" screen, not always at the same time, e.g sometimes at 44%, sometimes at only 80%, or it also happened that the machine rebooted in the middle of the process...
Installation & Setup
Windows 7 Installation Stops at Expanding Files
HELP!!!!!!!!!!!!!!!!!!!!! Alright, here is my issue. I have a Legit copy of W7, and all my hardware is new. The setup works fairly smoothely until the "Expanding Files" comes up. At which point, it doesn't proceed further than 0%, then after about 15 minutes, its pops up "required files...
Installation & Setup
Installation stops "expanding files" - Help please !!
I'm stuck in Windows 7 RC1 x64 installation. It always hangs at "expanding files", usually at 19% but not always, sometimes at 11%, 5%, .... No error, no BSOD, computer only stops copying files. After reboot (Vista x64) file "setuperr.log" is empty. Last line in file "setupact.log" is always:...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:47.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App