Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 don't start on my Acer Aspire X1300

09 Dec 2010   #1

Win 7 Professional 32 bit
 
 
Windows 7 don't start on my Acer Aspire X1300

A friend asked me to help him with this problem: He's got a Acer Aspire X1300 with a Win 7 Professional installed which hangs up at start up.
What can you see is the Windows Logo and "Starting Windows" coming up and then a dark screen and nothing happens.
I've tryied to re-install Win 7 booting from a DVD but it just won't start (never seen something like that before). System Recovery and all other trics from Acer do not work either.
The only solution I can see is to format the partition C somehow...any ideas?

Thanks
Bob R

My System SpecsSystem Spec
.

09 Dec 2010   #2
Microsoft MVP

W 7 64-bit Ultimate
 
 

Hello bobr, welcome to Seven Forums!



For a partition specific wipe (secure erase) of just the C: partition use Option Three of this tutorial at the link below.

Partition Wizard : Use the Bootable CD


If there's nothing on the entire Hard Disk Drive (HDD) that needs saved, you can use the Windows 7 installer using diskpart to wipe the whole HDD, see this tutorial.

SSD / HDD : Optimize for Windows Reinstallation



If you need to copy out the data first have a look at this third tutorial.

Copy & Paste - in Windows Recovery Console
My System SpecsSystem Spec
09 Dec 2010   #3
Microsoft MVP

 

Boot the DVD, select Repair on 2nd screen, accept any offered Repair. If it fails to start, boot back in, click through to Recovery Tools list to run Startup Repair up to 3 separate times with reboots: Startup Repair

If this fails, make sure the 100mb System Rserved or Windows 7 partition itself are marked Active: Partition - Mark as Active

Next test the RAM with memtest86 CD for 5-6 passes.

Then test the HD using maker's diag/repair full CD scan: http://www.tacktech.com/display.cfm?ttid=287

You can copy out files with DVD using this method: Copy & Paste - in Windows Recovery Console

Then wipe the HD to clean reinstall: re-install windows 7
My System SpecsSystem Spec
.


09 Dec 2010   #4

Win 7 Professional 32 bit
 
 

Quote   Quote: Originally Posted by Bare Foot Kid View Post
Hello bobr, welcome to Seven Forums!



For a partition specific wipe (secure erase) of just the C: partition use Option Three of this tutorial at the link below.

Partition Wizard : Use the Bootable CD
The utility starts then when asks for the screen resolution, at the end of the countdown it restarts the PC and start again...I cannot get past the point when it countdown for the screen resolution.
My System SpecsSystem Spec
09 Dec 2010   #5

Win 7 Professional 32 bit
 
 

Quote   Quote: Originally Posted by gregrocker View Post
Boot the DVD, select Repair on 2nd screen, accept any offered Repair. If it fails to start, boot back in, click through to Recovery Tools list to run Startup Repair up to 3 separate times with reboots: Startup Repair

If this fails, make sure the 100mb System Rserved or Windows 7 partition itself are marked Active: Partition - Mark as Active

Next test the RAM with memtest86 CD for 5-6 passes.

Then test the HD using maker's diag/repair full CD scan: Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.

You can copy out files with DVD using this method: Copy & Paste - in Windows Recovery Console

Then wipe the HD to clean reinstall: re-install windows 7
I'm not getting to the screen when it asks for system recovery (or startup recovery). The computer just gets blackgreish screen and that's all...
My System SpecsSystem Spec
09 Dec 2010   #6
Microsoft MVP

 

Test the HD and RAM to see if you have failing/failed hardware. In addition to memtest86 and maker's diag/repair CD scans linked in my prior post, run Disk Check from DVD Command Line by pressing Shift + F10 at first screen.

What happens when you try to boot the Windows 7 DVD? Can you get to the first screen to press Shift + F10 to open a Command Line to wipe the HD: SSD / HDD : Optimize for Windows Reinstallation

Try also to Select 1 for screen resolution before PW CD times out. PW should autostart to avoid needing to boot it, then once it wipes the HD the Installation DVD should autostart.

What happens if you press Alt + F10 to try to boot Acer Factory Recovery?
My System SpecsSystem Spec
09 Dec 2010   #7

Win 7 Professional 32 bit
 
 

I'm on this right now and I try to make it work.
I'm going to answer your questions as I go along the way

One more question: when you say "first screen" which screen do you mean?
My System SpecsSystem Spec
09 Dec 2010   #8

Win 7 Professional 32 bit
 
 

When I press Alt+F10 the computer ask me to choose to boot Windows normally or Startup Repair (recommneded). I'm not getting anywhere from here...
My System SpecsSystem Spec
09 Dec 2010   #9

Win 7 Professional 32 bit
 
 

this is the screen I'm getting and from there nowhere Windows 7 don't start on my Acer Aspire X1300-shift_f10-alt_f10.jpg


My System SpecsSystem Spec
09 Dec 2010   #10

Win 7 Professional 32 bit
 
 

If this is the Start Screen then I'm not getting there...
My System SpecsSystem Spec
Reply

 Windows 7 don't start on my Acer Aspire X1300




Thread Tools



Similar help and support threads for2: Windows 7 don't start on my Acer Aspire X1300
Thread Forum
acer aspire 5733 fails to start after system restore. Hardware & Devices
Need CPU fan replacement on Acer Aspire X1300 Hardware & Devices
Acer Aspire 5740 won't start up BSOD Help and Support
Windows OS for Acer Aspire One? General Discussion
Solved Acer eAudio Manager on Acer Aspire 5920G with Windows 7 Drivers
Acer Aspire M3203 and Acer's Windows 7 upgrade software Installation & Setup
Unable to Successfully Install Windows 7 on Acer X1300 Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:22 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33