Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Hangs during Install

13 Jun 2009   #1

Vista x64 (for now)
Hangs during Install

i'm installing this onto a blank, new hdd. (seagate 320GB 7200.11)

after i boot off the of RC1 7100 dvd, it finds the hdd, then it asks to make the 200 mb partition for system files. it creates that fine, then i continue to install 7 onto the rest of the partition. it seems to extract fine, runs through the install once, restarts one time, then continues ( which seems normal )

then, the progress bar at the bottom seems to be about 70% of the way across and it's on the last step (completing installation) and i get the 3 little dots going across, but it's not constant. it seems to hang for a little bit, then it continues. while it's hung up, i can't move the mouse (cursor) and i've let it sit there for more than 2 hrs, hoping that it would get past that point and finish.

i have tired this with both x64 and x86 vers. of the OS. and while 2 of my 4 gb dimms are removed.

i'm guessing that there is a problem with installing the chipset drivers or something. and i also haven't tried removing my video card during this install. i could slap in an old nvidia 7300GT to see if it's my 9800GTX+ that is the issue, but i'm more worried about it being the chipset (nvidia i750)

i burnt the dvd's from my testbed at work, and i've never made a coaster. so i don't think it's the media, or the ISO

i wonder if it is the chipset, if there is a way to import different drivers for it during the installation? or if there is something else that i'm missing that is causing it to hang at that point.

my comp does seem to have issues if i install an OS with 4x 1GB dimms in the machine, so i was hoping that the removal of 2x 1GB would do the trick. but no.

i hope to hear something back soon, and let me know if there is any other info you might need to solve this issue.


My System SpecsSystem Spec
14 Jun 2009   #2

Windows 7 64bit Ultimate Build 7268.0.090701-1900

RC1 doesent come with alot of drivers. Please try to get ahold of BETA (7201+) or even better, 7228. Many system crashes were fixed after the release of 7100, which im pretty sure is your issue here.

Give a newer build a shot, and let us know how it goes.

My System SpecsSystem Spec
14 Jun 2009   #3

Vista x64 (for now)

cool! there is hope!

yea, i have 7 x64 installed on my laptop (a HP DV2000 that i repaired from work) and that installed fine and runs great. but yea, i DO like 7, i just thought that it didn't like my motherboard and stuff on my desktop

i'll give that a shot tho. and do you think i should leave all 4 gigs of ram installed or should i still take out 2?
My System SpecsSystem Spec

16 Jun 2009   #4

Windows 7 7265 x64

I had the same problem.
I did three things. The first was, I think, the fix.
In system bios - deactivate the legacy floppy drive.
I removed all overclocking, all system defaults.
Removed 4 gigs of ram - 4 gigs remaining.
After doing the above Windows 7 7229 installed in about 25 minutes, MOL.

edit; I went back and tested - it was indeed the floppy drive.
My System SpecsSystem Spec

 Hangs during Install

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Windows Install Hangs after final reboot of install - new SSD
Hi all, My first post here. I never new there was such a forum! :) Good health and happiness to everyone! Your expert thoughts appreciated please? My system works OK with a Crucial MX4 128G SSD. So i thinks I will upgrade to a bigger SSD - a new MX100 256G and use the MX4 elsewhere. ...
Installation & Setup
Help with RTM install (hangs at disk.sys)
So far not having a good time installing Win7 RTM. I boot from the disk and it gets to the "Start Windows" screen (pre-install) and just hangs there. If I boot into safe mode for the install I see it gets to "disk.sys" and just stops there. Unfortunately I've tried formatting the c: drive...
Installation & Setup
System hangs after install
Hello, After hours of pulling my hair out, i am unsure what i can do. I had a copy of windows on my computer for about 3 months (non legit key) and with being happy with the O/S i decieded to go out and buy a copy and do a fresh install. Since installing, my 200gb HDD will no longer...
Installation & Setup
Windows 7 hangs during install
Man i sure hope someone out there can help. I have Vista home premium and am trying to go to Win 7 premium but during the install (custom install) it hangs up at "completeing install" about 2/3rds in, i have no cpu, dvd drive activity, nothing. I've heard it could take a long time to install but i...
Installation & Setup
during install of Windows 7 install. it Hangs UP
Help Error during install of Windows 7 install. Hangs UP, everything goes find till last fase completing install , it reboots after changes graphics. and mouse freezes also. just hangs their and will not complete, burned it with imageburn on the slowest speed 2 times Tried Several version of...
Installation & Setup
Install hangs
Hi, P5GGD1-FM (M board) P4 3.4Gb 3Gb RAM WinxP Home 32Bit NVIDIA (800GT Student Download 64Bit Pro.
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:44.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App