Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: CD/DVD device driver missing on 7 Starter install

20 Jan 2011   #1
erictaargus

Windows 7 Starter, Ubuntu Netbook 10.10
 
 
CD/DVD device driver missing on 7 Starter install

Alright, about a month ago, my Windows 7 Starter went dead on my Toshiba NB250 netbook. At first I thought it was a HDD issue. I tried using downloaded 7 recovery tools to no avail, and for some reason, whatever took out the OS, took the factory installed recovery partition with it..

After a few days, I was sick of waiting for the recovery media to arrive, so I tried Installing Ubuntu Netbook 10.10. It worked, so I assume the HDD is fine.

The recovery media is on dvds, so it's useless to me (for some reason my BIOS doesn't support a boot from an external dvd drive).

I got an iso of windows 7 starter. I've seen a ton of threads and responses where people say that the iso may be corrupted due to a bad download. Mine's fine, because it installs and runs in VirtualBox no problem.

I used the microsoft USB startup creation tool through my virtualbox installation. Thing is, whenever I try an install, I get a message saying there is a missing cd/dvd device driver. The thing has no cd/dvd drive, so I don't know what that's about.

I tried copying the iso contents onto another piece of media, and did not make that bootable. I tried an install from my bootable usb, and then plugged in the usb of files. Nothing.

I found this download on cnet, because I read about some guy who was messing around with his drivers to get an install to work. The cnet download was apparently only for vista, and when I put on my non-bootable media, and tried to install it when Windows asked for it, the installation told me that something was up with the drivers. Something to the tune of "contact the manufacturer for the newest software".

I guess that's about it. Let me know if you need any more information, and thanks in advance for the help.

ps. I'd rather not spend any money, as I've seen a few threads where people solve their problem buy buying a bunch of new pieces of hardware. Oh and my HDD is currently formatted in ext4 format, due to the linux. If this is the problem, please let me know, and sorry for not mentioning it earlier.

In conclusion, tl;dr


My System SpecsSystem Spec
.

20 Jan 2011   #2
gregrocker
Microsoft MVP

 
 

Write the ISO to USB flash stick using UltraISO trial version, which always works for me:

On FIle tab Open ISO
On Bootable tab Write Disk Image
Format
Write.

Boot under USB or HD. Wipe the HD first before trying install: SSD / HDD : Optimize for Windows Reinstallation

If error repeats download another Starter ISO or check HASH on existing to make sure it's complete.

If the Recov disk is an ISO you can also try writing it to USB using UltraISO.
My System SpecsSystem Spec
21 Jan 2011   #3
erictaargus

Windows 7 Starter, Ubuntu Netbook 10.10
 
 

OK, I'll wipe the hdd and try again.

Edit: my netbook doesn't have an ssd, I have an actual hdd

Another edit: I just thought of something: when I managed the successful install of the iso on the virtual machine, I used the iso file, not the usb pendrive. Could there have been a problem with the writing process (I'm using the <windows 7 usb.dvd download tool> to write the usb)
My System SpecsSystem Spec
.


21 Jan 2011   #4
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Quote   Quote: Originally Posted by erictaargus View Post
Alright,
After a few days, I was sick of waiting for the recovery media to arrive, so I tried Installing Ubuntu Netbook 10.10. It worked, so I assume the HDD is fine.

In conclusion, tl;dr
All Linux code must be deleted.As you have had linux on the HD you need do a Clean all & full format.
Try a full clean & full format in command prompt.
1) Boot DVD & Press Shift+F10 (for command prompt)
2) Boot DVD, & Command Prompt at Startup
(for command prompt)

Type in command line
DISKPART
LIST DISK
SELECT DISK # (win HD)
CLEAN ALL
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT fs=NTFS
ASSIGN
EXIT
EXIT

SSD / HDD : Optimize for Windows Reinstallation

USB Windows 7 Installation Key Drive - Create
My System SpecsSystem Spec
21 Jan 2011   #5
gregrocker
Microsoft MVP

 
 

Sometimes it takes several tries using different methods to get a bootable flash installer.

I suggested UltraISO because it always works for me.

Theog suggested another manual method. A third option would be Win2Flash: YouTube - How to install Windows 7 from USB (WinToFlash)

One of those should do it.
My System SpecsSystem Spec
Reply

 CD/DVD device driver missing on 7 Starter install




Thread Tools





Similar help and support threads
Thread Forum
"A required CD/DVD device driver is missing" upon windows 7 install
I've been trying to install Windows 7 on my Asus Q501L (which came with W8 already installed) via USB. I faced a problem - while the laptop was able to start the initials steps (the black screen where it shows the copying process of the Windows 7 files), i couldn't go any further than the step at...
Installation & Setup
Can't install W7 - Required CD/DVD Device driver missing!
Help please! I have a Vista Home premium Acer Travelmate 5720G laptop and am trying to update it to W7 Pro 32 bit with a fresh install using a Microsoft Volume Licensing DVD. The DVD is read, setup loads and I get as far as the language and keyborad selection screens. After completing the...
Installation & Setup
Network Controller Device Driver Missing - Can't Install - No WiFi
Have peculiar situation with laptop, hope someone can please advise.... Recently got the little Sony VAIO P, 2nd generation model VPCP11AKJ. Problems are as follows: 1. This is Japanese model, so, came with Japanese version of Win7HP and recovery OS is in Japanese and I do not know or...
Installation & Setup
Windows7 cant install on GTP partition & Device Driver install missing
Hi, I recently have posted aboutan issue with recovering from a partition whichwent fine. So I went through to do a clean re-install of windows 7 with a boot USB to get rid of factory bloatware and when I do. it gets to the option to write to a partition it sayscan't write to a GPT partition....
Installation & Setup
"A required CD/DVD drive device driver is missing" during install
I am using Windows XP SP 2 in a desktop PC. But I wanted to install Windows 7 to my computer. So I got a dvd and during installing it from boot from dvd mode, first I get the "select language and time" dialog box, I click next and then this message appears - "A required CD/DVD drive device driver...
Installation & Setup
"A required CD/DVD device driver is missing" during Win7 Install
Hello everyone, first post and thread! :) After many hours today looking for answers to this problem in many threads (and websites), I've finally decided to post to get some help from you guys! Any help would be greatly appreciated. I have just finished building a new desktop, here is the...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:20.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App