Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Relocate System Files on a Dual Boot

09 Feb 2011   #31

Windows 7 Ultimate 64-bit SP1

Probably because it is the wrong bit version.
It wasn't the wrong bit version if we believe on Control Panel >> System.

I am falling from a small hole into a bigger and deeper one.

I followed that tutorial. To be sure and not to make mistakes, I copied the commands from there to a text file which I opened when using the DVD (or USB flash) to prepare the installation.

I started installing and all went well until the first of the several automatic reboots during the installation. There, it was lost. it booted OK, but while loading Windows, right after the growing and shrinking logo there was a fast blue screen and rebooted. I tried a couple of time more, but as I can't set the OS not to reboot at a blue screen or even with the break button, it is impossible to reed.

I tried several times to install from the USB flash and from the DVD. Always the same. This is the first time I fail to install any OS. Then I even tried something really uncommon. I extracted the DVD to folders and files on the Backup HD (disk 1) and booted from there after starting with the DVD. No change. between trials I deleted the 200MB system reserved partition to change and because I thought it was too small to contain System Volume Information. All trials came to same result: after the first reboot the blue screen followed the Windows logo.

Trying to repair with the Windows installer DVD produces the same result as before: no compatibility between the recovery and the OS. Cant all this be because the system is on XP? If so, can it be moved to Windows 7?

- - - - - - - - - - / / / / / - - - - - - - - - - / / / / / - - - - - - - - - -

Here is the configuration, now as seen from XP. I hope it will help to understand the problem.

Disk # . . . . Size. . . . . . Type . . . .[Names]
------- . . . . -------- . . . ----- . . . .-----------------------------------
Disk 0 . . . . 112 GB . . . SCSI . . . E: Windows 7 /64-bit
Disk 1 . . . . . 72 GB . . . SCSI . . . F: Backup (No OS, no root files)
Disk 2 . . . . 963 GB . . . ATA . . . . D: Windows XP /32-bit & C: Basic

Windows Boot Manager
identifier . . . . . . . {bootmgr}
device . . . . . . . . . .partition=I:
description . . . . . . .Windows Boot Manager
locale . . . . . . . . . . en-US
inherit. . . . . . . . . . {globalsettings}
default . . . . . . . . . {default}
resumeobject . . . . .{4d9053eb-3451-11e0-bc64-b316d04564c7}
displayorder . . . . . .{default}
toolsdisplayorder . . {memdiag}
timeout . . . . . . . . .3

Windows Boot Loader
identifier . . . . . . . .{default}
device . . . . . . . . . .partition=I:
path . . . . . . . . . . .\Windows\system32\winload.exe
description . . . . . . Windows 7
locale . . . . . . . . . .en-US
inherit . . . . . . . . . {bootloadersettings}
osdevice . . . . . . . .partition=I:
systemroot . . . . . . \Windows
resumeobject . . . . {4d9053eb-3451-11e0-bc64-b316d04564c7}
nx . . . . . . . . . . . . OptIn
detecthal . . . . . . . .Yes

Disk Mgmt Snapshot

Attached Images
Relocate System Files on a Dual Boot-compmanage.gif 
My System SpecsSystem Spec
09 Feb 2011   #32


Only the System drive should be marked Active. Use free partition Wizard bootable CD or Diskpart to mark all drives except XP Inactive then mark XP Active.
Free Download Magic Partition Manager Software - Partition Wizard Online
Partition - Mark as Active

Try install again using Custom>Drive Options to delete, repartition and format before install.

If this fails, try wiping the HD again and use Step 2.2 in tutorial to partition and mark Active to try install.

Next try unplugging all other HD's to try install.

Please don't leave the listings off the top fo the disk mgmt screenshots as these are important..
My System SpecsSystem Spec
09 Feb 2011   #33

Windows 7 Ultimate 64-bit SP1

I have tried many times as you said and not only once each, also combining the procedures. Some times it didn't even boot, but it often does. The problem is that it stops with a blue screen while loading the OS just when the shrinking/growing logo should be followed by the "Please Waite" screen. I remembered that I could stop the blue screen with the OS F8 boot menu option. It shows always the same code no matter the way I installed as above. This is it:
0x0000007B (0xFFEFF880009A99428, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)

On the installations that didn't reboot I tried to recover with the DVD, but same notice about the OS compatibility with the recover version is always there. some times no OS is found after loading the SCSI adapter drivers, other times it founds 2, but the HDs show up always on the window to find the drivers and also on the command line window.

Some times I tried to rebuild the bootmanager. The command bootsect /fixbmbr worked, but fixboot gave an error Element not found. RebuildBCD answered Add (drive):\windows to bcd? and after the yes it gave the same error Element not found.

After so many installations I have made with the previous OSs through years without a single problem, this one now is driving me crazy because I can't find a reason. It seems unreal. I've tried all I know. So how can I do it? I can't see a way to get rid of this issue.

Sorry for forgetting to post the list before.

Attached Thumbnails
Relocate System Files on a Dual Boot-list.gif  
My System SpecsSystem Spec

09 Feb 2011   #34


If your install ends in bluescreen, try accessing Device manager to uninstall drivers in error, especially Display driver, so that the OS can start up. Device Manager - Access During Windows 7 Installation

Then update the drivers from optional Windows Updates or the Support Downloads webpage for the device model.

You can also move the HD to another computer, install Win7, then SysPrep the HD to remove all drivers and prepare it to start on new hardware. Windows 7 Installation - Transfer to a New Computer

Sometimes we have to get creative.
My System SpecsSystem Spec
09 Feb 2011   #35

Windows 7 Ultimate 64-bit SP1

Thanks again.

I can't do the second option. With the first, to be sure it would start with right HD (because it does't always happens at that point of the installation) when it rebooted I guided it with the BIOS menu. After loading the files in Safe Mode it stopped for a while and then the blue screen again.

Crazy! Maybe you have another idea to work around, please.
My System SpecsSystem Spec
10 Feb 2011   #36


Let's start over: Verify you have the latest BIOS version, install from XP with only XP and target HD plugged in.

Now try running the Win7 installer from XP to install to it's target HD.

If this fails, Unplug all other HD's. Plug target HD into Disk0 only.

Reset the CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS

Set target HD as first to boot in BIOS setup.

Check the SATA controller setting, if it is in IDE mode leave it to try install. If install fails, try AHCI mode.

Now boot the Win7 DVD to wipe the HD: SSD / HDD : Optimize for Windows Reinstallation

After Cleaning HD, close CMD box and click Install Now, use Custom>Drive Options to create 100gb install partition, format it and Install.

Please post back result of each step and any error messages that result. If you get a blue screen try to get a camera snap of it to post back, if not get at least the first identifying number.
My System SpecsSystem Spec
16 Feb 2011   #37

Windows 7 Ultimate 64-bit SP1

I'm back. Sorry if I couldn't post before because of the troubles I had as I explained below.

At some point of this thread I started having problems using my original installation DVD which I did not experiment before and had nothing to do with the subject of the thread. The results of many trials made me think that my DVD had gone bad. I tried to reinstall the OS, freshly installed just a couple of weeks ago, but always failed.

Then, I found a link to download a new ISO of the Windows 7 image to replace mine. It wasn't the version I had a license for, but I learned how to change it in a comment on a German site. After this I just had to follow the provided help on this thread to do what I needed and solved my issue. It is all there,

Thank you so much for the help from everyone and sorry for the difficulty after a certain point because of the failure of my DVD. I couldn't believe it failed just after a so recent and successful installation. I just wanted to change a little thing and it became a headache.
My System SpecsSystem Spec
16 Feb 2011   #38
Bare Foot Kid
Microsoft MVP

W 7 64-bit Ultimate

We're just glad you found a solution and thanks for the update.
My System SpecsSystem Spec

 Relocate System Files on a Dual Boot

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Dual boot system (Windows 8.1 and xp), how to edit boot menu from xp
I installed Windows 8.1 to try. The problem is that it stopped working and gives me troubleshooting boot menu . I have Windows xp on the machine too that's working fine. So now every time I open my pc, I get the boot menu where it says Windows 8 can't start. What u want to do. Run...
Installation & Setup
Boot OS is on 128GB SSD need to relocate to 256GB SSD same computer
I have 128GB SSD as boot drive C:/ This drive continues to be a nuisance, because I cannot get all new installs to use custom locations I request. The SSD drive contains the boot and registry and is drive is full. I bought another 256GB SSD to replace it. I plan for the 256GB drive to be...
Installation & Setup
How to make a system image for a dual boot system
I want to make a recovery disc to reset my entire 4 partition dual boot hard drive back to its current state. the recovery would reset both xp and win 7 which i have dual booting. can i make one single image to do this without it screwing up my boot loaders etc? what should i use? 3rd party...
Backup and Restore
Programs Files (86) seems to switch partitions in my dual boot system
I have a laptop setup dual boot. Windows 7 64bit and windows 32Bit (both professional versions). The 64 bit was installed on a partition with drive letter C:, and the 32 bit with a driver letter e:. I like to ghost both partitions, but I notice that the 64bit's "program files (86)" directory shows...
Installation & Setup
Recover Windows 7 boot on dual boot system with GRUB masterboot
Hi, I have a dual-boot system Ubuntu/Windows 7. The Master boot loader is GRUB. It worked fine until yesterday when, for some reason, Windows 7 refused to load anymore. I tried to repair with chkdsk, found and repaired some disk errors, but now the boot loader is damaged. The problem I have is...
General Discussion
Removal of XP System boot partition from a W7 Dual boot
With an XP Pro/W7 Pro Dual boot configuration, is it possible to do the following (see screen shot or DiskMgmt info of current config below): 1. Move boot data from XP partition to the W7 (extended) partition 2. Make W7 partition the Primary System partition 3. Format the XP partition 4....
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:35.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App