Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Need advice moving a win7 install to a new HDD and sata adapter.

02 Feb 2011   #1
dronf

vista/win7
 
 
Need advice moving a win7 install to a new HDD and sata adapter.

In the past I've migrated 7 from one hdd to another by doing a backup to a usb drive, then swapping the drives and restoring to the new one.

What I need to do now is a twist on that. My MB is one of the new p67s that has the faulty intel sata ports, and will eventually be recalled. The 4 6Gps sata ports on the board are not affected by the chipset problem, so i plan on just using them instead(plus i just got a 6G seagate drive that I wanted to use anyway).

What I envision happening is restoring to the new drive on an entirely different sata adapter and port #, and the system not booting. I assume i could get around this by booting to a command prompt and using bcedit, but am not 100% on that.

Can someone recommend a good way to do this, or if my idea sounds fine, confirm it?

thanks!


My System SpecsSystem Spec
.
02 Feb 2011   #2
iseeuu

 
 

Quote   Quote: Originally Posted by dronf View Post
In the past I've migrated 7 from one hdd to another by doing a backup to a usb drive, then swapping the drives and restoring to the new one.

What I need to do now is a twist on that. My MB is one of the new p67s that has the faulty intel sata ports, and will eventually be recalled. The 4 6Gps sata ports on the board are not affected by the chipset problem, so i plan on just using them instead(plus i just got a 6G seagate drive that I wanted to use anyway).

What I envision happening is restoring to the new drive on an entirely different sata adapter and port #, and the system not booting. I assume i could get around this by booting to a command prompt and using bcedit, but am not 100% on that.

Can someone recommend a good way to do this, or if my idea sounds fine, confirm it?

thanks!
Hello dronf, and welcome to Windows Seven Forums.

You have left out lots of info that would help answer your question. Is this a Desktop Computer? A laptop?

With my desktop, I use a second hard drive to save an image created by Windows Seven backup utility. When the OS hard drive failed, I just swapped for a new hard drive, booted to my 7 install DVD, and restored the OS to the new hard drive.

You could do something similar and just as easy. You have the choice of saving the image on either the old hard drive or the new hard drive. If you do not have an install DVD, have Windows 7 make you a repair CD for you to boot from and restore the image to the new hard drive.

If you wish to give more details about your computer, I am sure we can offer some good suggestions for you to choose from?

Cheers!
Robert
My System SpecsSystem Spec
03 Feb 2011   #3
dronf

vista/win7
 
 

It is a desktop. I've used the backup and restore many times before with success(burning and using a repair cd to boot from), but it was always to another hard drive plugged into the same port. In this case it is not only a different port, but on a different sata controller altogether.
My System SpecsSystem Spec
.

03 Feb 2011   #4
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

My System SpecsSystem Spec
03 Feb 2011   #5
iseeuu

 
 

Quote   Quote: Originally Posted by dronf View Post
It is a desktop. I've used the backup and restore many times before with success(burning and using a repair cd to boot from), but it was always to another hard drive plugged into the same port. In this case it is not only a different port, but on a different sata controller altogether.
If you remove the old hard drive, the computer bios will search for and find the boot files on the new drive. Otherwise you can open the bios utility and specify the new hard drive as the first in boot order. The computer will boot the OS on the new hard drive.

Cheers!
Robert
My System SpecsSystem Spec
03 Feb 2011   #6
gregrocker

 

Try reimaging per normal to new HD/port. If it balks, plug old HD back into old port and SysPrep using steps in theog's tutorial, then save another image, clone/reimage it to new HD in new port and it will start up to reinstall all drivers automatically.

If either HD is Seagate or Acronis, you can use their free Acronis cloning/imaging app to clone over HD easily. Look on Support Downloads webpage for your model HD.
My System SpecsSystem Spec
26 Mar 2012   #7
mfa

Windows 7 Home Premium 64bit
 
 
A slightly different but maybe related problem

I had a working Windows 7 Home Premium system installed on a 20GB IDE (master) drive on a FOXCONN M61PMP motherboard. There were also a DVD drive as an IDE slave, and a 1GB SATA drive installed. The BIOS boot sequence was DVD-IDE-Floppy. Everything worked as expected.

I decided the 20GB HDD was ready for the museum, so I re-installed the OS on the SATA drive. I changed the boot sequence to DVD-SATA-Floppy, and everything still worked. I then removed the IDE drive altogther, and changed the DVD drive to be the IDE master. No changes were made to the SATA adapter or drive. The BIOS recognized everything properly, and was configured to boot in the order: DVD-HDD-Floppy (!).

The system will no longer boot from anything. Any ideas?
My System SpecsSystem Spec
Reply

 Need advice moving a win7 install to a new HDD and sata adapter.




Thread Tools





Similar help and support threads
Thread Forum
Cant boot/install Win7 to SSD after BIOS update - Need Advice!
Hello All, Several days ago I installed several updates that were identified by the MSI Live update for my machine. One of these updates for the BIOS which I stupidly included (yes I understand now that was a dumb mistake). After rebooting, I was presented to "please insert boot disk and...
General Discussion
Need advice on purchasing PCIe to SATA 3 adapter card
Hey all, I'm upgrading my SSD from an Intel SATA II 320 120GB - which has worked very well for me - to a Samsung SATA III 840 EVO 250GB. My computer doesn't have any native SATA III hookups, but I do have several PCIe 2.0 slots that are open and ready to be used. As such, I've decided to...
Hardware & Devices
Network adapter not recognised after Win7 clean install
Hi, I decided to do a clean install of my Windows 7 Ultimate on my PC (not a brand model, but one that was assembled together in-store). While everything worked fine before the install (it was slow, hence the clean install), the installation went well except that the network adapter cannot be...
Network & Sharing
Fresh win7 install need driver and HDD install advice
Just did a clean install of windows pro on new hdd. Told setup to only install important updates and auto updates in turned off. Searching this forum i found a few folks say "definitely let windows install all the drivers for MOB, devices, etc. they are the experts" while another post said "always...
Installation & Setup
Clean install of Win7 won't detect SATA HDD. Drivers updated.
I assembled a new computer using: Windows 7 64bit Pro SP1 OEM System Builder Pack Gigabyte H77M-D3H 1TB SATA HDD WD Caviar Black Intel Core i3 2125 DDR3 8GB 1600 Intel Viper SATA LG Blue Ray DVDRW Clean install of Windows reveals an error not detecting any drives, does not allow...
Installation & Setup
Clean Install of Win7 - Codec Installation Advice Needed
Good morning, I’m doing a fresh install of Windows 7 Home Premium 64-bit tonight and I am looking for some advice on codecs to install to get optimum playback in Windows Media Player 12. Should I install a codec pack? should I install just the codecs I need? and what order should I install...
Music, Pictures & Video

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App