Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Explorer can't see the RAID disk

26 Jun 2009   #1

Explorer can't see the RAID disk

I have a dual boot Vista and Win7 RC on one disk.
2 other disks in Raid1.

Downloaded the Beta Intel Matrix Storage Manager with the help from this site. TX.

Now "My Computer" and "Windows Explorer" don't see the Raid disk.

Intel Storage Manager; Win7 Disk Management; Win7 Defragment can see the Raid disk. Did even a defrag and checked the result via Vista: all fine.

What's happening. TX

PS: In Win7 beta the config was allright

My System SpecsSystem Spec
26 Jun 2009   #2


Found the answer in this forum.
I should have wnadered around a bit more.
My System SpecsSystem Spec

 Explorer can't see the RAID disk

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Windows Explorer & Disk Management not see Raid 1
I have the motherboard Asus P7P55-M with the last update for BIOS ver 1101 Date 09/04/2012, CPU Intel i5 Core, RAM 6GB, Graphic Card AMD Radeon HD 5450, 1st device disk with OS WIN 7 64bit WD 160GB SATA, 2nd device Plextor PX-810SA SATA, 3rd device WD 640 SATA, 4th device WD 640 SATA. My...
Hardware & Devices
How to monitor disk health in raid config?
I have set up 2 seagate drives in raid 0 stripe on an Intel Rapid Storage controller and would like to be able to monitor the health of these drives. Any program that I've tried reports it as a SCSI Disk Device and offers no info. I've also tried to find something that would monitor the...
Hardware & Devices
Software raid 0 on Boot disk
Hi, this is my first post in Windows seven Forums. I am building a laptop for college with two identical drives, and unfortunately no on-board raid controller. They are 2 120gb ssd's and I feel like they would be alot more useful as one drive rather than 2 small drives. I have Windows 7...
Installation & Setup
loading windows 7 onto large RAID 0 disk
Hi I am new here, but I must already thank you for all the interesting info I have found here. I recently upgraded my computer and part of the plan was to use two 2Tb drives in a raid setup for my main windows drive. I see that it only recognises about half of the raid volume and the rest is...
Installation & Setup
Disk Boot Failure with RAID 0 Array
Hi I have two 500Gb SATA drives in a RAID 0 config set as my system drive 'C', and a 1TB SATA as a storage drive 'E' Never had this problem until last night when I removed the storage drive. Tried the usual fixes with no luck, put the drive back in and the system boots normally. The...
Hardware & Devices
Windows Explorer does not see my RAID 0
Windows Explorer does not see my RAID 0. I have a new build with an Asus P6T Deluxe V2 mobo, Intel i7-920 cpu, and 12 GB of Corsair Dominators. During setup, I configured a RAID 0 with 2 new formatted but otherwise clean 7200 1TB Hitachi Deskstar SATA HDs. I then did a clean install of Windows...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:06.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App