Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: XP/7 Dual Boot Disaster - Unplugged?

13 Mar 2011   #1

Windows 7 Professional 64 bit
XP/7 Dual Boot Disaster - Unplugged?

Hi everybody,

Here's what happened...

My system was running Win XP Pro 32bit in C:. I desired to upgrade to Win 7 Pro 64bit. Everything checked out fine using Windows Advisor and I backed up my files using the Windows Easy Transfer tool. I booted the system from the Win 7 Pro 64bit disk and proceeded with the install. For some reason, Win7 got hung up wanting Drivers!? I loaded every driver I could get my hands on - still no success. So, I attempted to boot normally back into Win XP Pro 32bit and alas, the Boot Manager was missing! I figured, I'm one step away from owning a brick!

Here's what I did... (sorry)

I booted from my XP Pro 32bit disk and installed it onto my D: drive. I figured I would be able to load the DVD drivers to keep them active for a clean install of Win 7 Pro 64bit after a newly formatted C: drive. So far, so good... Then, I reformatted my C: drive and performed a clean install of Win 7 Pro 64bit. Sweet...almost. Upon reboot, I now have a dual boot system! But, I don't want that!

Here's what I got...

Gigabyte GA-880GA-UD3H Rev. 2.1
AMD Phenom II x 4 945 95Watt
PSU Seasonic X650 Gold
C: WD VelociRaptor 300Gig
D: WD Caviar Blue 640Gig
F: WD Caviar Blue 640Gig
8 Gigs DDR3 RAM
Lite-On IHAS-324-98 R x 2

Drive Status:
Disk 0 - C: Simple Basic NTFS - Healthy (Boot, Page File, Active, Crash Dump, Primary Partition)
Disk 1 - D: Simple Dynamic NTFS - Healthy (System)
Disk 2 - F: Simple Dynamic NTFS - Healthy

Here's what I'm trying to do...

I want to have Win 7 Pro 64bit stay on C:
I want to eliminate Win XP Pro 32bit on D: so I can format and use that drive for data and backups only.
I want to leave my F: alone.

Obviously, I'm not real sure about what I'm doing, so I desperately need some help to walk me through this. I just don't know.

If necessary, I can reformat and reinstall Win 7. There's not much on it right now, but I'd really rather not. I'd have done that already, but the system won't let me. I'll still have to be able to access and reformat my D: Drive.

Now I'm thinking, (which is dangerous) that I could disconnect the D: Drive, and boot from the Win 7 disk to maybe reformat C: and reinstall Win 7. But then, I wouldn't be able to reconnect the D: Drive (with a System on it) and boot up from C: in order to reformat the D: Drive! Something tells me this is not a good thing. "No guts, no glory" is not a confident move for me... Besides, if I can keep my Win 7 intact, that will save me lots of time reloading and reconfigurating to get back to where I currently reside. Other than that, everything is running just the way it's supposed to... GREAT!

I've been reading previous posts and solutions here to the point where I'm totally confused! Can you tell?

I need some serious help with this guys, if you don't mind. Thank you in advance for any help or suggestions you might venture to offer. If you think I need to just shoot myself, don't be shy... Have the courage to tell me so! I'll probably take your advice at this point!


My System SpecsSystem Spec
13 Mar 2011   #2


If you want to save your current Win7 install, please post back a screenshot of your full maximized Disk Management drive map with listings, using Snipping Tool in Start Menu.

Because you left all the HD's connected there could be multiple complications besides the unwanted Dual Boot. We can help you remove the Dual Boot and make any other necessary changes.

Frankly to get the cleanest install you should unplug all other HD's and wipe the target HD first, as formatting erases nothing and can leave infected or corrupt code on the HD. SSD / HDD : Optimize for Windows Reinstallation

But if you want to test performance on the current install after extricating the Dual Boot and any other issues, post back the screenshot and we will give you the steps.
My System SpecsSystem Spec
13 Mar 2011   #3

Windows 7 Professional 64 bit

I found the 'Snipping Tool' and copied a full screen of Disk Management. Now, exactly HOW do I send this to you?
My System SpecsSystem Spec

13 Mar 2011   #4


Post it up using the paper clip in reply box.

Tell us what you prefer to do.
My System SpecsSystem Spec
13 Mar 2011   #5

Windows 7 Professional 64 bit

XP/7 Dual Boot Disaster - Unplugged?-capture.png

I think this is it. I prefer to keep my Windows 7 on my C: drive. Thanks.

My System SpecsSystem Spec
13 Mar 2011   #6


Power down to Unplug XP HD so it doesn't interfere with repairs.

Next set Win7 HD as first HD to boot in BIOS setup (after DVD drive), boot the Win7 DVD Repair Console, accept any offered Repair. If it fails to start, boot back in to DVD Repair console's System Recovery Options to Startup Repair - Run 3 Separate Times.

Repair will run tests and fixes, eventually writing the System boot files to Win7 partition so it boots on its own in 1-3 separate repairs with restarts in between to test if Win7 starts.

Make sure Win7 remains first HD to boot in BIOS setup when you plug XP HD back in to wipe it using Diskpart Clean All command, which will delete XP as well as convert to Basic disk: Disk - Clean and Clean All with Diskpart Command. If it interferes with the boot, then instead boot the 7 DVD to run Diskpart Clean All on XP HD from the Repair console Command Line.
My System SpecsSystem Spec
14 Mar 2011   #7

MS Windows 7 Home Premium 64-bit SP1

Dear Sager,
Just a quick word. When you were using win.XP 32, were you using the same partition system--> C as Basic and D and F as Dynamic? OR did you notice this after you tried to upgrade to Win.7 Prof. 64 Bit, as the difference between Basic and dynamic is like Chalk and Cheese!

My System SpecsSystem Spec
14 Mar 2011   #8

Windows 7 Professional 64 bit

Thank you for the rapid replies guys!


Great technical point and one which I inadvertantly omitted during my initial post. Originally, WinXP was on the C: drive. Then I moved (reinstalled) it to D: and reformatted C: for the installation of Win7. I did notice that D: with XP was an 'Active drive' at the time and C: was not. Being a dummy I guess, and for some reason I don't even know, I made C: 'Active' also. It appears that D: now is no longer 'Active' but C: is. Evidently, this means something other than I a dummy?


Thanks for the formula --- waiting for reply to see if the 'Active Drive' business above plays a part in the equasion, before executing your instructions. Thanks!

My System SpecsSystem Spec
14 Mar 2011   #9


C needs to be marked Active to do the repairs which wll recover the System boot files into Win7 partition. Just follow the steps given unless you have changed your mind.
My System SpecsSystem Spec
14 Mar 2011   #10

Windows 7 Professional 64 bit

Okay gregrocker... I haven't changed my mind...gulp. Thanks.
My System SpecsSystem Spec

 XP/7 Dual Boot Disaster - Unplugged?

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Going from XP/XP dual boot to Win7/XP dual boot on a new drive
Hi, This is my first question on this forum. The drives on my PC are currently configured the following way: Disk 1 (600 GB) - Partition 1: C: "System" (XP, bootable) (50 GB) - Partition 2: D: "Music" (XP, bootable) (50 GB) - Partition 3: E: "Samples" (500 Go) Disk 2 (1 TB) -...
Installation & Setup
Disaster after removing dual boot Win 8 with Win 7, Cant fix laptop..
Okay, I'm sure many of you techies get a laugh as you read this but I was eager to try Win 8. And after a few week I realized the it was just slowing my performance some so I just decided to unistall it. Was immeaditely faced with a BSOD on next reboot and have repairing and re-installing since to...
Performance & Maintenance
Marvell Controller Unplugged / Reboot and Select proper Boot device
Hi guys, I have a new PC with a SSD and 2 other drives. Using a P8P67 LE motherboard by ASUS. I have had two black screens in a period of a month that pretty much say, "Reboot and Select proper Boot device." I noticed when I went into BIOS, that my SSD was kicked out of the boot priority...
Hardware & Devices
dual boot , reinstall the windows and lost dual boot
Hello Everyone , i was wondering if anyone could help me in this matter : i have windows7 and Redhat on my Laptop , i have removed and reinstalled the Windows7 last night and after that lost the Dual boot option , in fact the system is booting on windows7 and there is no option to chose...
Installation & Setup
Dual Boot Issue (Lost my Dual Boot Menu)
Hey Guys, So I just got my hands on Windows 7 and wanted to play around with it, and everything works but: Previous Computer Setup: I had a dual boot with XP and Vista that worked perfectly (both OS's were on separate HD's and worked / booted correctly.) Drive C: --------> Vista (Now...
Installation & Setup
Dual boot Win7 with XP - disaster!
Hi, I really need help with this! I have 2 XP installs on my pc, both on separate partitions. Today I installed Win7 Home Premium 64bit on a clean partition on a separate drive with the intention of creating a triple-boot system. After the Win7 install finished, I installed some updates and...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:21.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App