I just installed Windows 7 64bit over XP. There is only one system on the machine, no dual boot setup. At startup I am getting the screen that asks me what OS I want to boot to and shows Windows 7 twice instead of going right in Windows. Is ther a fix for thisso I do not hsave to make a selection or wait for the count down?
Hello Iceberg, welcome to Seven Forums!
Before we make any specific recommendations will you please post a snip/screen-shot of the entire disk management drive map with a full description as to which drive/partition is which, so we can see what you have going on as there may be a fairly simple way to resolve the situation.
In the Windows start menu right click computer and click manage, in the left pane of the "Computer Management" window that opens click disk management and post a maximized snip of that.
How to Upload and Post a Screenshot and File in Seven Forums
Thanks! I will get what you want tonight when I get home. The drive is not partitioned. I do have three hard drives. One for media storage, one has XP and the other is 7. When I did the install the other 2 drives were disconnected and I got the screen before I hooked the other drives up again.
Look in Windows 7 at the msconfig boot tab to see if there's more than one entry for Windows 7, XP would not be listed there and be sure to post back here with any further questions you may have and to keep us informed.
I will check it tonight. If there is, what should I do?
You said that you installed Win7 over XP, but that you also unplugged the XP and data drives during install. Which was it?
You can remove the Dual Boot menu by highlighting the second Win7 listing in the msconfig>boot tab, then Delete.
Did you unplug Xp because you plan to boot it using BIOS Boot Menu key at bootup? If so, test it now to see if it will boot because it seems to have lost its System flag although it is Active.
There is no way for us to know if you in fact deleted XP since you cut off the columns in the manager's listings showing the size on disk. If you dont' want XP I would delete it in Win7 DIsk Mgmt since the Active flag will steal the System boot from Win7 if repairs are done. For this reason it is best to have your System HD in DISK0 slot, set first to boot in BIOS setup.
Before I installed 7 I cloned my HD onto a second one. I then unplugged 2 of the HDs and installed 7 on one of the cloned drives. I plan to boot using BIOS Boot Menu key at bootup.
The Disk 2 is the Windows 7 that was booted when the snip was taken.
If both Disk 0 and Disk 2 have separate bootable Windows 7 versions and you want to use the BIOS one-time boot menu to boot them independently?
Power down and disconnect the data cables from the mobo of Disks 1 & 2 and set Disk 0 as second boot device after the CD/DVD drive, boot the Windows 7 installer and do the 3 separate startup repairs to create separate boot files to Disk 0.
Startup Repair - Run 3 Separate Times
When Disk 0 is booting on its own, power down and connect (the previous) Disk 2 to the #1 SATA port of the mobo and set it as the first boot device in the main BIOS.
Then you should have the option to use the one-time BIOS boot menu to select which OS/HDD to boot at machine startup.
Be sure to post back here with an update.
Quote