master jumper ide disk


  1. neverall
    Posts : 86
    windows 7 pro
       New #1

    master jumper ide disk


    i got sata disk with windows 7 on it,and ide disk...i changed jumper on ide to master..?? now in bios,ide configuration ,onboard ide controller is enabled,serial ata devices are mark as "device0/1" .(i have sata dvd/rw and sata disk)..is that ok.... problem is when starting pc ,after changing jumper from cable select to master,althought its only ide device ,my pc takes time about 30 sec to list all devices....what to do to solve it and still leave ide as master..thx!
      My Computer
    Quote Quote

  3. Zepher
    Posts : 2,164
    Windows 7 Ultimate 64bit
       New #2

    Why did you change it from Cable Select? What is the make a and model of the drive? some older IDE drives had a Jumper for Master Single and no Jumper for Master w/Slave, or vice versa.
      My Computer
    Quote Quote

  4. neverall
    Posts : 86
    windows 7 pro
    Thread Starter
       New #3

    Storage Devices
    WDC WD800BB-22JHC0 80GB (ATA100, 2MB Cache) : 75GB
    WDC WD6400AAKS-22A7B0 (640.1GB, SATA300, 3.5", 7200rpm, 16MB Cache)
    TSSTcorp CDDVDW SH-S223F (SATA150, DVD+-RW, CD-RW, 2MB Cache) : 3GB...because i was told before i can make it master with no problem if its only ide something....now pc works,but my ami bios list about 20 sec all devices which didint before??
    pri master: ide hard disk (which is ok ,it is ide disk)
    3th master: atapi cd rom (why not say satait is sata dvd/rw)
    4th: master: ide hard disk (also,why ide ,when its wd6400aaks saat disk?)
    Last edited by neverall; 10 May 2011 at 14:40.
      My Computer
    Quote Quote

  6. SledgeDG
    Posts : 2,009
    Windows 7 Ultimate x86
       New #4

    set all unused ide ports to N/A or disabled (depends on your BIOS) That might speed up the process

    -DG
      My Computer
    Quote Quote

  7. neverall
    Posts : 86
    windows 7 pro
    Thread Starter
       New #5

    SledgeDG said:
    set all unused ide ports to N/A or disabled (depends on your BIOS) That might speed up the process

    -DG
    dont get it..bios post message:
    pri master: ide hard disk (which is ok ,it is ide disk)
    3th master: atapi cd rom (why not say satait is sata dvd/rw)
    4th: master: ide hard disk (also,why ide ,when its wd6400aaks saat disk?)
      My Computer
    Quote Quote

  8. Ztruker
    Posts : 6,285
    Windows 10 Pro X64
       New #6

    Why did you change from Cable select to Master? If it worked correctly with Cable select, put it back.
      My Computer
    Quote Quote

  10. neverall
    Posts : 86
    windows 7 pro
    Thread Starter
       New #7

    ok.....i surrender:) its ok now! thx much!
      My Computer
    Quote Quote

 

  Related Discussions
Fixing Win 7 with the master disk
in Performance & Maintenance

As someone who bought a master disk of Win 7 Home Premium with his new computer, I'd like to know how I use the master disk to fix any damage done to the system. I seem to remember that all it took with the old Windows 98 was to simply pop the disk in the drive and it more or less was straight...
Jumper settings
in Hardware & Devices

Hi, I use this drive as master HD: Samsung SSD 830 Series - MZ-7PC064 and want to use this as slave: Western Digital WD20EARX 2TB, read that I have to use the jumper on pin 3-4 but it does NOT work, tried without any jumper and still nothing. The HD is recognized in the BIOS but Windows does...
jumper ide disk
in Hardware & Devices

i have sata disk ,second is ide...is it ok to put jumper to master on ide disk? win 7 is on sata?
HDMI jumper?
in Graphic Cards

I just put a HIS Radeon HD 5600 in my nVidia MCP78v/S/U Chipset mbo. I want to set it up for HDMI but can't find the jumper on the mbo. Can anyone help? The spec on the mbo tells me but I can't find it phyically. David
Hi, i had my PC running XP fine, no problems that im aware of. i partitioned the hdd and installed Windows 7 x64 on second partition and now every now and then the PC reboots and displays the error; 4th master hard disk error, press f1 to continue any help would be great, let me know if...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 23:04.
Find Us