Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Windows 7 failed to install

16 Jun 2011   #1

Windows Xp 32
Windows 7 failed to install

I have windows 7 bootable DVD and want clean instalation. i boot from DVD and opened stup and i chuse Custom (advanced) instalation and i formated my hard drive instalation started copying files complited on expaning files i got blue screen and this happens evri time i try to instal windows 7....pls is the pic of blue screen i get Windows 7 failed to install-260581_1856047355998_1085253691_31634121_6857575_n.jpg

My PC config.
Mother board P5VD2-MX SE ASUS

pls help

My System SpecsSystem Spec
16 Jun 2011   #3
Bare Foot Kid
Microsoft MVP

W 7 64-bit Ultimate

Hello Milosss, welcome to Seven Forums!

It may help to do a complete wipe of the Hard Disk Drive / Solid State Drive first and then start the installation process again, have a look at Step One of the Optimize tutorial below; after you have copied out or made back-ups of the data you need to save to external media, then boot the Windows 7 installation media to do the wipe secure erase to the HDD / SSD and be sure to post back with any further questions you may have and to keep us informed.

Whether you use diskpart to run either the clean all command to completely wipe a HDD / SSD or just the clean command to remove the format configuration data and don't use diskpart to create at least a single partition to do the installation to, letting the Windows installer do the format, the new Windows 7 System Reserved partition will be automatically issued, if you want to make your own decision whether this partition is added, study these two (2) options below.
  • If you do not want to create the new Windows 7 "System Reserved" partition use the outline in Step Two #2 to create, format and mark Active a single 100GB partition to do the installation to.
  • If you do want to create the "System Reserved" partition use the outline in Step Two #3 to create, format and mark Active the System Reserved partition and then create and format the 100GB partition to do the installation to.
Either way, running the clean all then creating and formatting the partition(s) using diskpart will get you the best possible space to do a clean install of Windows 7 to; you can always extend the Windows partition to include the remaining unallocated space on the HDD / SSD or create additional Primary partitions or an Extended partition after the installation completes if you choose.

SSD / HDD : Optimize for Windows Reinstallation

DISKPART : At PC Startup

Do a Clean Install with a Upgrade Windows 7 Version
My System SpecsSystem Spec

16 Jun 2011   #4


Test your RAM - Test with Memtest86+

Test your HD with maker's diag/repair extended CD scan: HD Diagnostic

Wipe the HD. SSD / HDD : Optimize for Windows Reinstallation

Reset the CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS
While in BIOS setup set the SATA controller to AHCI.

Unplug all other HD's and peripherals. Boot the Win7 DVD to CUstom Install, create your partitions, format, install.
My System SpecsSystem Spec
18 Jun 2011   #5

Windows Xp 32

it didnt help
My System SpecsSystem Spec
18 Jun 2011   #6

Microsoft Community Contributor Award Recipient


What did not help.
My System SpecsSystem Spec
18 Jun 2011   #7


What are the results of each step that was given?

What is blocking install now?

If you have onboard video, enable it and disable card in BIOS or unplug card to try install.

Do you have another computer you can install to your HD in with it's HD's unplugged, then SysPrep your HD before returning to problem computer so it will start on other hardware? SysPrep to move HD to another computer
My System SpecsSystem Spec
18 Jun 2011   #8

Windows Xp 32

I have VGA PCIE XPERTVISION GF7300LE 256MB2 and VGA Int. i unplugg VGA PCIE XPERTVISION GF7300LE 256MB2 from motherboard and blue scrin fix but i get this error
My System SpecsSystem Spec
18 Jun 2011   #9


Have you enabled the onboard graphics chip in BIOS setup? You'll need to have onboard graphics chip in order to install without the video card.
My System SpecsSystem Spec
18 Jun 2011   #10

Windows Xp 32

I didnt do anything in BIOS i just unplug GeForce video card from motherboard i have VGA integrated video card i run XP whit out GeForce card now and i didnt do any thing is BIOS
My System SpecsSystem Spec

 Windows 7 failed to install

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar help and support threads
Thread Forum
Windows install failed, can't repair
So my computer went from running perfectly fine to barely functional in a day. So I decided to reformat and reinstall. The plan was a complete reset. Factory defaults. So I backed up my stuff. Loaded up the install disk, formatted both my drives, combined some partitions and installed windows. Now...
Installation & Setup
Windows failed to install updates
Hey guys, so im trying to do some windows updates, about 65 important updates and every time i try and do it within 5 seconds it says that i has failed to update. Not sure why it keeps doing this. Any help is appreciated. Thanks!
Windows Updates & Activation
Windows 7 Repair Install Failed
I am trying to do a Windows 7 Repair Install to repair some USB driver issues I am having. I did a Clean Boot and un-installed my AMD display drivers first using DDU. I started the Repair Install using the instructions on this forum in the Tutorials. Everything proceeded as per the...
Installation & Setup
Failed to install Windows 7 - I/O Error
Good afternoon all, I have been having problems to install Windows on this laptop for a while now, when I bought this laptop about 5 years ago, it had Windows Vista installed. I used it for a while and though "Let's treat myself to a nice upgrade to Windows 7" - Okay so I went to buy a disk, the...
Installation & Setup
Windows 7 SP1 Failed to Install - 0X800736B3
Any help would be greatly appreciated, I would rather not have to do a fresh install of Windows just to successfully apply the SP1 update, but here is a summary of what I've tried to do thus far: Attempted Actions: (1) Windows Update - SP1 Install Failed (0x800736B3) (2) Install from Microsoft...
Windows Updates & Activation
Windows 7 failed rollback/Install
Posted this on Neowin also but no harm posting it here: Hi, I have the RTM version of Windows 7 which i installed on a newly created partition, the install failed and then the rollback subsequently failed and hung. I have since deleted the partition I planned to install Windows 7 on,...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:12.

Twitter Facebook Google+

Windows 7 Forums

Seven Forums Android App Seven Forums IOS App