Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.



Windows 7: Windows 7 Pro 32 doesn't boot

15 Aug 2011   #1

windows 7 pro 32
 
 
Windows 7 Pro 32 doesn't boot

Hi,
first time poster here. I need some help.
While installing Windows 7 Pro 32 I stopped the process (not clever) after I removed and expanded 2 of 3 partitions. I wanted to have 2 partitions instead of 3.

So now I get these screen, and nothing else works, F11 doesn't react.


AMIBIOS 2005
..............
................
.............
Press F11 for Boot Menu
Dual Channel Memory Mode
2048MB OK
Auto Detecting SATAII 1...IDE Hard Disk
Auto Detecting IDE1 Master.ATAPI CDROM
SATAII 1: WDC WD3200AAJS-00VWA0 12.01B02
Ultra DMA Mode-5, S.M.A.R.T. Capable but disabled

I thing after messing up with the harddrive, formating, partitioning, expanding, removing partitions, and finally stopping the installation process i f@#$ up the system.

Help please,
Thanks in advance

My System SpecsSystem Spec
.

15 Aug 2011   #2

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Will the Windows 7 DVD boot up? If YES.
Clean the HD drive, Repartition, & format.
SSD / HDD : Optimize for Windows Reinstallation
My System SpecsSystem Spec
15 Aug 2011   #3

windows 7 pro 32
 
 

That's the problem the dvd doesn't boot up. Nothing works.
I was thinking about booting up from my external harddrive. Install wintoflash and a ISO copy from my Windows 7 in the external usb harddrive. I don't know if the computer would recognize the usb drive.
My System SpecsSystem Spec
.


15 Aug 2011   #4
Microsoft MVP

 

Reset the CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS

While in BIOS set DVD drive first to boot, then HD.

Place DVD in drive, restart and wait for prompt to "Press any key..."

Select Custom Install, Drive Options, repartition as you wish, format before installing to first OS partition. Clean Install Windows 7

If DVD won't boot, write it to flash stick using Ultra ISO: On File tab select Open DVD, on Bootable tab select Write Disk Image, Format, Write. Boot under USB or HD.

If necessary set HD first to boot in BIOS setup and trigger DVD or USB to boot using one-time BIOS boot menu key given on first boot screen.

Next test the HD using WD Data Lifeguard bootable CD scan: HD Diagnostics.
After repair Write Zeros to HD using same CD.

If install fails again format full HD partition using free Partition Wizard then Check file System
My System SpecsSystem Spec
16 Aug 2011   #5

windows 7 pro 32
 
 

hey Gregrocker,

I coud get in the BIOS only after removing both connections of the DVD and the Harddrive, and reseting the CMOS.
I was able to install Windows 7 from the DVD.
Next I will test the HD like you said.

Why can't I reinstall windows 7 while rebooting from the DVD?

Thanks for the help, I am seeing the light at the end of the tunnel.
My System SpecsSystem Spec
16 Aug 2011   #6
Microsoft MVP

 

One you were able to reset the CMOS after unplugging HD and DVD drive, after plugging them back in did the DVD boot normally?

If not, how were you able to get it to boot?

Will it boot now?
My System SpecsSystem Spec
17 Aug 2011   #7

windows 7 pro 32
 
 

hey Greg

yes it booted from the dvd. Then after accessing BIOS, I connected the HD. At first it didn't recognize the HD while installing Windows 7, I thought I had to install HD Drivers, and suddenly the HD was recognized and i could install Windows 7.

The problem now is that i can't reinstall Windows 7 from the cd.

when "press any key to boot from CD or DVD" shines on the screen i don't have the option to reinstall. It boots directly.

Maybe a keyboard issue?

Oh and i've done the HD test but directly inside of windows, not with a bootable cd. I used WD Data Lifeguard diagnostic for windows. It passed the test, but I couldn't WRITE ZEROS because that's the System Drive.

???
My System SpecsSystem Spec
17 Aug 2011   #8
Microsoft MVP

W 7 64-bit Ultimate
 
 

Quote   Quote: Originally Posted by Mins View Post
hey Greg

yes it booted from the dvd. Then after accessing BIOS, I connected the HD. At first it didn't recognize the HD while installing Windows 7, I thought I had to install HD Drivers, and suddenly the HD was recognized and i could install Windows 7.

The problem now is that i can't reinstall Windows 7 from the cd.

when "press any key to boot from CD or DVD" shines on the screen i don't have the option to reinstall. It boots directly.

Maybe a keyboard issue?

Oh and i've done the HD test but directly inside of windows, not with a bootable cd. I used WD Data Lifeguard diagnostic for windows. It passed the test, but I couldn't WRITE ZEROS because that's the System Drive.

???
Hello Mins, welcome to Seven Forums!


You have to boot to diskpart to wipe the "System" HDD.

DISKPART : At PC Startup

SSD / HDD : Optimize for Windows Reinstallation

My System SpecsSystem Spec
17 Aug 2011   #9
Microsoft MVP

 

Is there a response when you "Press any key..." or does it time out as though you pressed nothing? What does it boot into? Exact error message?

Try using a PS2 keyboard, or enabling USB legacy in BIOS.

If that fails and you are using a DVD you burned yourself, has it worked before? If not, confirm ISO integrity against official TechNet HASH or download and burn another using ImgBurn at 4x speed with verify.

Next I would try writing the DVD or ISO (if source) to USB flash stick using UltraISO trial version: On File tab Open DVD or ISO, on Bootable Tab Write Disk Image, Format, Write. Boot under USB or HD's.

And yes, test your HD using maker's diag/repair extended CD scan which can also wipe the HD for you afterward. I'd also run Disk Check from the installer Repair console Command Line although you'll need to format a partition to scan with /r switch.
My System SpecsSystem Spec
Reply

 Windows 7 Pro 32 doesn't boot





Thread Tools



Similar help and support threads for2: Windows 7 Pro 32 doesn't boot
Thread Forum
Windows 7 DVD doesn't boot, neither does USB. :'( Installation & Setup
Windows doesn't want to boot BSOD Help and Support
Windows 7 doesn't boot BSOD Help and Support
Windows doesn't boot Installation & Setup
Windows 7 doesn´t boot up BSOD Help and Support
Windows 7 x64 dvd doesn't boot up -Not boot order issue Installation & Setup
Windows 7 7201 x64 Doesn't Boot General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 05:30 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33