Need HELP w/ Dual Boot XP Pro32 & Win7 Ultimate -VHD or Partition

Page 1 of 2 12 LastLast

  1. Posts : 9
    XP Pro 32bit (sp3) & Windows 7 Ultimate 64-bit
       #1

    Need HELP w/ Dual Boot XP Pro32 & Win7 Ultimate -VHD or Partition


    Just got the Win 7 Ultimate Full Retail 32/64 software & I'm not sure which method is best for now & future...Virtual Hard Drive or add another Partiton to one of my (2) hard drives?

    I need to migrate slowly to Win 7 to get used to the interface & do 64bit software installs after using XP for so long. Time to get full use of my DualCore machine!

    XP Pro 32 currently installed.

    HD #1 (160gb)
    C:92gb (54gb free) = Windows, Hardware & Drivers
    D:62gb (47gb free) = Installed Programs
    HD #2 (250gb)
    E:47gb (14gb free) = Backups, Downloads
    F:47gb (35gb free) = Program Files
    G:139gb (81gb free) = Music, Videos, Movies & DVD Creation
    RAM = only 4gb for now

    So, I have read enough of the tutorials here know enough to "F" something up, but want to try & start on the right foot.

    Questions:
    1) Install VHD, add a partition to an existing HD, add a new HD or add external HD for Win 7?
    2) Size & location of VHD or partition
    3) Best toutorial for the above?
    4) Any other recommendations?

    Thanks
      My Computer


  2. Posts : 22,814
    W 7 64-bit Ultimate
       #2

    Hello bjack56, welcome to Seven Forums!


    As you have 2 separate HDDs have a look through this information below and be sure to post back with any further questions you may have and to keep us informed.

    However you do it, be sure to put Windows 7 on a Primary partition and not an Extended/ Logical drive, Windows cannot boot natively from an Extended partition.

       Information

    The easiest way to do away with boot issues between separate Operating Systems (OS) is to use the BIOS one time boot menu to select which OS to boot at system startup, each motherboard has an individual hot-key to tap during system start-up to access this menu.

    If you have 2 separate Hard Disk Drives (HDD) and have one OS installed to one HDD and you want to install another OS to the second HDD, disconnect the HDD with the first OS installed on it and leave only the HDD you want to install the second OS to connected.
    Install the second OS to the connected HDD and when complete and the system is booting good, power down and reconnect the first HDD with the first OS on it.

    This way the OSs will boot independently of each other and there will be no boot conflicts between the 2 separate OSs to have to sort later.





    Then set the BIOS to boot the HDD / OS you want as default and if you want to start the other (new) OS you use the BIOS one-time boot menu to select that HDD / OS to start when the PC is started.
    • Asus - F8
    • HP/Compaq - Esc
    • Sony - F2
    • Acer – F12
    • Packard Bell
    • Gateway - F10
    • eMachnes - F10
    • Gigabyte – F12
    • Toshiba - F12
    • Dell - F12
    • IBM/Lenovo - the blue Thinkvantage button
      My Computer


  3. Posts : 1,030
    Linux Mint / XP / Win7 Home, Pro, Ultimate / Win8.1 / Win10
       #3

    bjack56 said:

    Questions:
    1) Install VHD, add a partition to an existing HD, add a new HD or add external HD for Win 7?
    2) Size & location of VHD or partition
    3) Best toutorial for the above?
    4) Any other recommendations?
    You have pretty much answered your own question...

    Go with option 1) ...add a new HD.

    As drives are inexpensive and you listed that as an option, go for it. Then:


    • Unplug current hard drives (from the drives themselves or the mobo).
    • Install and plug in new hard drive.
    • Start computer, insert Win7 DVD and boot to it.
    • Install Win7 to the new drive.
    • Shut down/turn off computer.
    • Reconnect original HD(s).
    • Start computer, go to BIOS and set the desired DEFAULT hard drive boot order.


    To change boot order, enter the "one time" boot select during startup - keystroke will depend on your mobo/BIOS (mine is F12). Select the desired drive and go for it.

    Regards,
    GEWB
      My Computer


  4. Posts : 9
    XP Pro 32bit (sp3) & Windows 7 Ultimate 64-bit
    Thread Starter
       #4

    My C: (System) & E: are shown as Primary Partitions in Computer Mgmt.

    So, do not used this tutorial? Dual Boot Installation with Windows 7 and XP

    Looks like adding an HD would be best for future?

    What about the other questions...NO to VHD?

    Edit: Sent at same time as GEWB

    GEWB...does the connection order matter, like cable select vs DIP? Can I just connect 3rd HD anywhere on my system, like last with letter H-Z, & boot to 1st HD C: or 3rd HD H:+?

    Hey I only mess with this stuff every 3-4 years :)
      My Computer


  5. Posts : 1,030
    Linux Mint / XP / Win7 Home, Pro, Ultimate / Win8.1 / Win10
       #5

    bjack56 said:
    My CSystem) & E: are shown as Primary Partitions in Computer Mgmt.

    So, do not used this tutorial? Dual Boot Installation with Windows 7 and XP

    Looks like adding an HD would be best for future?

    What about the other questions...NO to VHD?
    In your original post you stated:

    "So, I have read enough of the tutorials here know enough to "F" something up, but want to try & start on the right foot."

    And you listed adding a new hard drive in your first option - you have pretty much answered your own questions and concerns. Follow the steps I gave and you will not mess up your current drives/programs/files while installing Win7.

    (Oh, one thing - don't register your Win7 during installation, do it after you complete the install and reconnect the other drives.)

    Regards,
    GEWB
      My Computer


  6. Posts : 22,814
    W 7 64-bit Ultimate
       #6

    If you want to slowly move all your personal data to Windows 7 from XP, continuing to use Windows 7 and remove XP, the 2 separate HDD method has the fewer related issues in the long-run.

    A VHD won't work if the above is the grand scheme of things though for information sake, have a look through this tutorial linked below.



      My Computer


  7. Posts : 1,030
    Linux Mint / XP / Win7 Home, Pro, Ultimate / Win8.1 / Win10
       #7

    bjack56 said:

    GEWB...does the connection order matter, like cable select vs DIP? Can I just connect 3rd HD anywhere on my system, like last with letter H-Z, & boot to 1st HD C: or 3rd HD H:+?
    Your mobo has six SATA connections - use a SATA hard drive. The mobo BIOS doesn't know drive letters (C:, D:, etc.) only physical device designations base on the SATA channel it is plugged into on the mobo.

    When you UNPLUG all current hard drives, plug in the new drive and install Windows, Win7 will assign "C:\" to the first active partition and it will STAY that way whenever you boot into Win7. However, when you boot into XP it will see the Win7 "drive" and partitions as different drive letters.

    SUGGESTION:
    Name the partions (partition label) something easy to recognize under any OS. Mine are names like:

    • C-XP-home
    • C-XP-work
    • C-Win7
    • C-2008r2


    You get the idea.

    Regards,
    GEWB
      My Computer


  8. Posts : 9
    XP Pro 32bit (sp3) & Windows 7 Ultimate 64-bit
    Thread Starter
       #8

    Points taken guy's...will add a HD & use your directions.

    Dumb question but...
    1) Can you recommend a HD?
    2) As you can see, I prefer to separate all my stuff on different drives. What happens to all my new Win7 Hardware Installs, Program Installs & File Pointers if I get a new computer? Should I just put ALL Win7 programs, files, etc...on the 3rd HD w/ the OS or can I just put them on existing HD #1 & 2 directories so I don't have to change all my "locations" or re-install w/ new computer?
      My Computer


  9. Posts : 1,030
    Linux Mint / XP / Win7 Home, Pro, Ultimate / Win8.1 / Win10
       #9

    bjack56 said:
    Points taken guy's...will add a HD & use your directions.

    Dumb question but...
    1) Can you recommend a HD?
    2) As you can see, I prefer to separate all my stuff on different drives. What happens to all my new Win7 Hardware Installs, Program Installs & File Pointers if I get a new computer? Should I just put ALL Win7 programs, files, etc...on the 3rd HD w/ the OS or can I just put them on existing HD #1 & 2 directories so I don't have to change all my "locations" or re-install w/ new computer?
    Motto
    MISS and KISS

    (Make It Stupid Simple and Keep It Stupid Simple)

    You can partition your new drive and use it as you wish but I recommend the new drive (regardless of partions) be used for Win7 work - you CAN swap/use compatable files between XP and Win7regardless of the location, just keep your installed PROGRAMS separate.

    Regards,
    GEWB
      My Computer


  10. Posts : 1,030
    Linux Mint / XP / Win7 Home, Pro, Ultimate / Win8.1 / Win10
       #10

    Here is a screen shot sampling of one of my computers Windows Explorer - it has four hard drives, each is dual boot yielding seven different operating systems (I have two XP installations). This Explorer screen shot shows the WINDOWS partitions only (Windows doesn't "see" the Linux partitions).

    Need HELP w/ Dual Boot XP Pro32 & Win7 Ultimate -VHD or Partition-drives-gewb.gif

    You can see I'm currently booted into C-Win7 ("C:\" and there are other "C:" drive labels for the other Windows version boot options. I use several partitions for mass storage of files that I share between Windows versions.

    Here is a screen shot of Disk Manager.

    Need HELP w/ Dual Boot XP Pro32 & Win7 Ultimate -VHD or Partition-diskmngr-gewb.gif

    I hope it gives you some ideas.

    Regards,
    GEWB
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 16:03.
Find Us