Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win 7 install problems.

27 Aug 2011   #21
gregrocker

 

Does SSD register in BIOS now?

Does it still hang on the Starting Windows screen? Is this the old OS or the new install attempt?

Try booting the DVD Repair console or Repair CD to run Startup Repair a few times. Post back results.

Go back over all of the troubleshooting steps given so far to make sure each has been done, or ask back questions needed to get them done. Then we will have more steps.

Do you have another computer to install Win7 to the desired SSD/HD if necessary then SysPrep it to move back to problem hardware?


My System SpecsSystem Spec
.
27 Aug 2011   #22
depthcharge

Windows 7 Ultimate 64 Bit, LINUX MINT 14 NADIA 64 BIT CINNAMON EDITION
 
 

Hi Thorekong,

try to get into the Windows Recovery Environment and do a Startup repair.
My System SpecsSystem Spec
27 Aug 2011   #23
Thorekong

Windows 7 Ultimate x64
 
 

Yea the ssd show in the bios now.

first when I install the windows I get a black screen with a blinking cursor, and when I try and restart the machine it just hangs at the start up screen.

Ill try to run it and check it out
My System SpecsSystem Spec
.

27 Aug 2011   #24
gregrocker

 

Does this happen when you boot the Installation DVD?

Where did you get Win7? Did you burn it yourself. If so did you check ISO integrity and burn another using ImgBurn at 4x speed?
My System SpecsSystem Spec
27 Aug 2011   #25
Thorekong

Windows 7 Ultimate x64
 
 

This is the real verson I have never used a burned version of windows :P
My System SpecsSystem Spec
27 Aug 2011   #26
gregrocker

 

Do you know that you are booting the DVD for sure? How to Boot your Computer from a Bootable CD or DVD - Boot to CD

Do you get the prompt to "Press any key to boot DVD" then the files load, and what happens?
My System SpecsSystem Spec
29 Aug 2011   #27
Thorekong

Windows 7 Ultimate x64
 
 

Yes I get prompt , and then I start the install, but the problems start when it stands Completing installation.
My System SpecsSystem Spec
29 Aug 2011   #28
gregrocker

 

Are you using a VGA monitor outputted by the computer's VGA port? Sometimes this error occurs if you have a TV card installed or it's outputted to a projector. When the driver fails to load for those then the screen goes blank with blinking cursor.

Try a VGA monitor with normal VGA cable from the VGA port.
My System SpecsSystem Spec
29 Aug 2011   #29
Thorekong

Windows 7 Ultimate x64
 
 

Now I have bought a new keyboard, and tryed both my screens to se if there where any problems there but nothing new happened. and the screens are both VGA monitors with VGA cables...
My System SpecsSystem Spec
29 Aug 2011   #30
gregrocker

 

Go back through the thread to make sure you have completed every troubleshooting step suggested, or ask back how to get it done.

If so do you have another computer to install Win7 to the target HD plugged in by itself? Then SysPrep the HD before moving it back to problem computer: SysPrep to move HD to another computer
My System SpecsSystem Spec
Reply

 Win 7 install problems.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
ssd install problems
Hi, new and hope you can help Just purchased a crucial 256gb ssd V4, realised the boot up has to be ahci rather than IDE for full speed. Cloned the ssd, ut didnt boot due to AHCI. ok, so install win 7 as fresh on ssd, and tried loading software, its painfully slow. So am i best off reloading...
Installation & Setup
Problems with W7 SP1 install
I have this through using automatic updates but fails to install, if I choose get help and then troubleshoot and then Microsoft Fix it. The d/l box opens with a file called Mats_Run.Wind.....exe 754KB of which I have twice, if i run this then it opens a box to repair commen problems but this makes...
Windows Updates & Activation
install problems
i know my other thread was moved.. those bsod's were when i had windows up and running... now i cant get it installed. ive gone through the suggestions listed on the help list, and i just cant get it to install properly now when i try to boot from the HDD i get "BOOTMGR is missing - Press...
Installation & Setup
install problems
I have been trying to do a clean install of windows 7 with no success. I get through what appears to be a clean install on a formatted disk and windows7 comes back with an error message about an unexpected reboot and that I basically need to start over. I have tried 32b and 64b versions. This is...
Installation & Setup
Install problems
I am trying to install Win7 Pro 64bit. Brand new Biostar TA790GXE 128M MB with new AMD Phenom x4 9750 Quad Core, New 2GB RAM DDR2-8500 1066MHz (one stick), New SATA DVD, Existing IDE 160GB HDD, Existing 1.44MB 3.5" floppy, existing USB card reader, existing USB/PS2 mouse, existing PS2 keyboard. ...
Installation & Setup
Problems after install
I currently have Vista 64 bit on my laptop. I have tried to install windows 7 both as an upgrade an a clean install. It installs on my laptop and I am able to setup my accounts and install all of the windows upgrades. However, as soon as I turn off my laptop and try to turn it on I get to the...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:20.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App