Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: windows 7 installation crashed


06 Oct 2011   #1

Windows XP SP2
 
 
windows 7 installation crashed

hi
last days due to humidity i lost my mainboard and now having a new CPU.

i attached my old HD as there was an additional port on the board and transferred old files to new HD
Old HD had windows XP installation.
Due to some reason i formatted XP (only installation drive) on old HD (h:\) and it has done successfully

But the problem is it has changed the mbr of windows 7 installation, the PC starts with 2 HDs only.
Nothing happend to the files in win 7 installation drive (C:\). But i need to boot the win 7.

Files from the old HD (a win XP installed) are transferred it doesn't matter what happens to it.
so can some one help me to recover the windows 7 installation, i don't have any backup image i have only installation disk.


My System SpecsSystem Spec
.

06 Oct 2011   #2

Windows 7 Ultimate SP1 64-Bit
 
 

Hello niharthekadi. Welcome to Windows 7 Forums.

Can I suggest you run a startup repair? This tutorial shows you how and it is advisable to run the repair three times.

Startup Repair
My System SpecsSystem Spec
06 Oct 2011   #3

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

First check all the cables.

information   Information
Boot up using the Startup Repair CD or Windows 7 DVD. (not the OEM manufacturer's Recovery Disk) If you have a Netbook, you will need a CD/DVD drive.
NOTE: Make sure no USB drives are plugged in.
Do not use a USB Pendrive for Startup Repair.
startup repair disc-create


Do a Strartup Repair:
Startup Repair
Note: You may need to do startup repair 3 to 4 times.
Startup Repair - Run 3 Separate Times
My System SpecsSystem Spec
.


06 Oct 2011   #4

Windows XP SP2
 
 
start up repair not working.

> DVD boot :
OK when i tried to Start up repair with both Hard-disk, it said windows can not correct this automatically, and it detected the C:\ installation.

when tried with only new HD(and physically detached old one) , it did not detected c:\ installation and Start up repair said : Could not detect any problem.

> Boot with new HD :

it gives a long message :
-----------------------------------------------------------------------------------------------
Windows could not start because of a computer disk hardware
configuration problem.
Could not read from the selected boot disk. Check boot path
and disk hardware.
Please check the Windows documentation about hardware disk
configuration and your hardware reference manual for
additional information.
-----------------------------------------------------------------------------------------------
more over it starts only with 2 HDs connected and start only win xp,
with out any option and
I don't have the "Boot.ini" tab on the "msconfig" in the XP.
My System SpecsSystem Spec
06 Oct 2011   #5

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Make sure the Windows 7 HD Drive is plugged in to the first Sata port on the MOBO & first boot HD in BIOS.
My System SpecsSystem Spec
06 Oct 2011   #6

Windows XP SP2
 
 

BIOS settings are OK by sure but how to decide which port is first on the board.
OK i am checking it if numbers are written.
My System SpecsSystem Spec
06 Oct 2011   #7

Windows XP SP2
 
 

OK on SATA1 : new HD, SATA2: old HD and on SATA3 : DVD drive.
but the problem is same. trying to boot through only new HD gives that long message and with both HDs only XP starts.
this times XP detected new HD as 'found new hardware' may be because i changed ports.
-------------------------
i have also tried :
when booted with DVD both HDs connected it detects C:\ win 7 installation,
now from "Repair Your computer > command prompt" -
"bootrec /fixmbr" (with out quotes)
but no effect even after "successfully done" message
also,
"bootsect /nt60 C:"
log :
------------------------
Target volumes will be updated with BOOTMGR compatible bootcode.

C: (\\?\Volume{0c715219-8105-11e0-9163-8b1d1c444d84})

Updated NTFS filesystem bootcode. The update may be unreliable since the
volume could not be locked during the update:
Access is denied.

Bootcode was successfully updated on all targeted volumes.
---------------------
but no effect.
My System SpecsSystem Spec
06 Oct 2011   #8

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Are you sure there is no Sata 0 port?
My System SpecsSystem Spec
06 Oct 2011   #9
Microsoft MVP

 

Please post back a screenshot of your maximized Disk Mgmt drive map with listings showing all columns, using the Snipping Tool in Start Menu.

The normal procedure when removing the System partition HD is to mark Windows 7 partition Active (you must do this, Startup Repair will not do it for you) then booting the Windows 7 DVD Repair console or Repair CD to run Startup Repair - Run 3 Separate Times.

However there may be complications now that you've added code that may have corrupted the MBR.

To mark Windows 7 partition Active now, use Diskpart from the DVD/Repair CD Command Line: Partition - Mark as Active (Method Two) or boot free Partition Wizard bootable CD to Modify>Set to Active. If you use PW CD you can then highlight the Windows 7 HD and from Disk tab select "Rebuild MBR" which will often work on its own.

Have you tried repairing XP using XP Repair Install ?
My System SpecsSystem Spec
07 Oct 2011   #10

Windows XP SP2
 
 

sorry to reply late
but this time I have images

@theog, i don't have a good cam but I have annoted what is written on the board.

@
gregrocker, I have attached the screen shot

SATA PORTS

Screen Shot of disk mgmt


Attached Thumbnails
windows 7 installation crashed-disk_partition.jpg  
Attached Images
 
My System SpecsSystem Spec
Reply

 windows 7 installation crashed




Thread Tools



Similar help and support threads for2: windows 7 installation crashed
Thread Forum
Java 5.0 jdk crashed under installation. Now trouble Software
Windows 7 crashed during installation, now we can't boot. Installation & Setup
Solved Windows 7 Crashed during installation BSOD Help and Support
my windows 7 has crashed BSOD Help and Support
Windows 7 x64 Crashed BSOD Help please! BSOD Help and Support
Windows 7 Crashed No BSOD BSOD Help and Support
windows 7 crashed BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:06 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33