Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: using sata hdd with ide at same time help!

10 Dec 2011   #21
sinbin

windows 7 64 bit premium
 
 

the new ide drive ihave is maxtor maxline 2, ata/133 320 gb hdd


My System SpecsSystem Spec
.
10 Dec 2011   #22
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

My System SpecsSystem Spec
10 Dec 2011   #23
sinbin

windows 7 64 bit premium
 
 

it has jumpers on it allready i assume there in master position!by defult

whats this key for bios
My System SpecsSystem Spec
.

10 Dec 2011   #24
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

For maxtor HD Drives:
Jumper Settings | Seagate
My System SpecsSystem Spec
10 Dec 2011   #25
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

You can not have your HD Drive & DVD Drive both set to MASTER, as they work not work.
My System SpecsSystem Spec
10 Dec 2011   #26
sinbin

windows 7 64 bit premium
 
 

shall i order a ide to sata converter!
then could i just plug the converter into the hdd and plug the sata lead from it in my sata 1 slot!
would this work with what im trying to acheive?
My System SpecsSystem Spec
10 Dec 2011   #27
sinbin

windows 7 64 bit premium
 
 

what the hell was all that code
My System SpecsSystem Spec
10 Dec 2011   #28
gregrocker

 

Quote   Quote: Originally Posted by sinbin View Post
the new ide drive ihave is maxtor maxline 2, ata/133 320 gb hdd
Maxtor jumper settings: http://www.google.com/url?sa=t&rct=j...lhcz1MxBhiuxew

Use the IDE cable, set jumpers correctly: HD as Master, DVD as Slave.
My System SpecsSystem Spec
10 Dec 2011   #29
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Quote   Quote: Originally Posted by sinbin View Post
what the hell was all that code
What code?
My System SpecsSystem Spec
10 Dec 2011   #30
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Quote   Quote: Originally Posted by sinbin View Post
shall i order a ide to sata converter!
then could i just plug the converter into the hdd and plug the sata lead from it in my sata 1 slot!
would this work with what im trying to acheive?
The HD Drive jumper will still need to be MASTER.
My System SpecsSystem Spec
Reply

 using sata hdd with ide at same time help!




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
D SATA Hard Drive disappears after random amount of time.
My D 200gb SATA hard drive disappears around 1-90 mins while on windows 7. I have tried registry repairs and alot of things. Its not faulty cables because i used to have win Xp on exact same computer but reformatted to windows 7. Rebooting makes the hard drive reappear but it still disappears after...
Hardware & Devices
BIOS not recognizing both mSATA SSD and SATA HDD at the same time
Hello all, I am new to the forum. Thank you in advance for your help. I have the M5-481PT-6644 which came installed with win 8. My HDD crashed and had to be replaced. While waiting on the RMA I upgraded my SSD to 128GB and installed win 7 (my win 8 copy went down the drain with the drive as...
Hardware & Devices
FYI Only - Discovered only slight diff betw SATA-1 vs. SATA-3 cables
I read an article stating there’s very little difference between SATA cables. So I tried it for myself. This screenshot shows the slight differences in speed; likely most of you already knew this. In testing, an 11GB file transferred in 10 seconds using either cable. Vid link shows detail of...
Hardware & Devices
Sata Ext Drive corruption. IS IT TIME TO THROW IN THE TOWEL YET?!
:cry:THIS IS SUCH A PAIN. after losing power to my computer in the middle of accessing the drive info,it still is recognized as a device but not detected anywhere else. i can bring up the drive on the hd low level disk tool but it reads as unknown an unallocated and when i tried to initialize it,i...
Hardware & Devices
SATA 3 not working on Asus P6X58D-E motherboard with SATA III support
Yesterday I had a PC technician around to see why my PC was not booting-up properly and also to change my SSD to a larger SSD. As I am visually challenged I cannot do hardware upgrades etc, so I got a Techie guy in. We used Zinstall HDD by-the-way and I would highly recommend this application...
Hardware & Devices
Safety of internal 3.5 Sata IDE in external Sata case for backups
I'm looking at a Sabrent EC-UEIS7 Hard Drive Enclosure - 3.5" IDE/SATA to USB 2.0, eSATA in order to use one of my now internal Sata drives as an 'external' backup device. If I turn the external power off on the back of the external Sata enclosure with my extra old Sata connected in it...will...
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 14:49.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App