New
#1
Error message "No drives found" on boot up after new build & install
Just completed my first build. I have two error messages during the boot sequence that I cannot resolve. The first screen shot during boot is the Asus logo. Next is a black screen that reads:
"JMicron Technologies, PCI Express to SATA Host Controller ROM V1.07.23
Detecting drives; Done; No drives found"
next up is another black screen that reads:
"Marvel 88SE91XX Adapter BIOS version 1.0.0.1029
Initializing...No drives present
PCIe X1 5.0 GB p/s
Mode: CPU AHCI"
It then proceeds to boot up Win 7 with no apparent problems. The SSD is hooked up to the SATA6 G_2 port. Nothing is hooked into the SATA6 E_1 or E_2 ports.
In the BIOS, under the SATA menu, I have the mode set to AHCI.
SATA 6G_1(Gray) is "not present" and the hot plug "disabled."
SATA 6 G_2(Gray) shows M4-CT128M4SSD2(128.0 GB) and hot plug is "enabled."
SATA 3G_3(Blue) is "ATAPI iHAS424 B ATAPI" and hot plug is "enabled."
The SATA6_E1 SATA6_E2 ports are "not present" and "disabled."
Under the Boot menu, Boot Option Priorities: #1 is set to P2: M4-CT128M4SSD2(128.0 GB.) #2 is set to P3: ATAPI iHAS424 B ATAPI. CD/DVD Rom Drive has an expandable arrow which shows, when clicked, Boot Option #1 ATAPI iHAS424 B ATAPI. Hard Drive BBS Priorities is expandable to show "Boot Option #1 M4-CT128M4SSD2 (128.0 GB.)
Build Specs:
OS: Windows 7 Professional x64 SP1
MOBO: ASUS P8P67 Deluxe
BIOS: Version 4/26/2011 1606 x 64
CPU: Intel i7-2600k
RAM: 16 GB(4X4) Ballistix 240-pin DIMM
SSD: 128GB Crucial m4 2.5"
HDD: none
ODD: Lite-On LightScribe 24X SATA DVD+/-RW Dual Layer Drive IHAS424-98
VIDEO: NVIDIA Quadro NVS 450
PSU: Antec EA-500D
I hope that is enough information to help someone diagnose the error messages and I greatly appreciate any suggestions and advice.