Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: No device drivers were found while installing Windows 7

15 Jan 2012   #1
pommesorbet

Windows 7 Home Premium 32bit
 
 
No device drivers were found while installing Windows 7

Hello all, I am trying to install Windows 7 on the following desktop PC:

Intel Core i3 Processor i3-530
2048MB DDR3
500GB 3G Hard Drive
ATI Radeon HD 4350 Graphics
Supermulti Drive with LightScribe Technology


First, I will start by saying that when I turn on my PC, I receive this message on a black screen "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key". When I press a key, nothing changes, i.e. still stuck on the same screen.

So, I decided to install Windows 7.

When I tried installing Windows 7, it would begin the installation process... I clicked "Install Now", then when given the options between "Upgrade" or 'Custom (Advanced)', I selected the Custom Advanced.

When asked 'Where you would like to install Windows?' (see screenshot #1.jpg), there was nothing shown in the box, i.e. there is no hard drive or partition for me to select where I can install Windows. So just to try, I clicked "Load Driver".

It prompted me to install a device driver. I clicked Browse and browsed through the existing drives. (see Screenshot #2.jpg)

Next, it showed me that 'No device drivers were found..." (see Screenshot #3.jpg)

I tried to google on how to find the drivers to install but to no avail.

Any ideas on how I should proceed from here? i.e. How to install the device drivers needed to continue the installation process etc.

Thanks!




Attached Thumbnails
-screenshot-1.jpg   -screenshot-2.jpg   -screenshot-3.jpg  
My System SpecsSystem Spec
.
15 Jan 2012   #2
GianniDPC

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by pommesorbet View Post
Hello all, I am trying to install Windows 7 on the following desktop PC:

Intel Core i3 Processor i3-530
2048MB DDR3
500GB 3G Hard Drive
ATI Radeon HD 4350 Graphics
Supermulti Drive with LightScribe Technology


First, I will start by saying that when I turn on my PC, I receive this message on a black screen "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key". When I press a key, nothing changes, i.e. still stuck on the same screen.

So, I decided to install Windows 7.

When I tried installing Windows 7, it would begin the installation process... I clicked "Install Now", then when given the options between "Upgrade" or 'Custom (Advanced)', I selected the Custom Advanced.

When asked 'Where you would like to install Windows?' (see screenshot #1.jpg), there was nothing shown in the box, i.e. there is no hard drive or partition for me to select where I can install Windows. So just to try, I clicked "Load Driver".

It prompted me to install a device driver. I clicked Browse and browsed through the existing drives. (see Screenshot #2.jpg)

Next, it showed me that 'No device drivers were found..." (see Screenshot #3.jpg)

I tried to google on how to find the drivers to install but to no avail.

Any ideas on how I should proceed from here? i.e. How to install the device drivers needed to continue the installation process etc.

Thanks!
Are you trying to install it with USB or a DVD ?
My System SpecsSystem Spec
15 Jan 2012   #3
pommesorbet

Windows 7 Home Premium 32bit
 
 

I am using a DVD to install.
My System SpecsSystem Spec
.

15 Jan 2012   #4
GianniDPC

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by pommesorbet View Post
I am using a DVD to install.
Are you using an ISO image ?
My System SpecsSystem Spec
15 Jan 2012   #5
pommesorbet

Windows 7 Home Premium 32bit
 
 

No, it is not an ISO image.
Inside the DVD, there are the files needed for the installation, i.e. when I view the DVD contents, I can see the individual files and folders inside.
My System SpecsSystem Spec
15 Jan 2012   #6
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

My System SpecsSystem Spec
15 Jan 2012   #7
gregrocker

 

Where did you get Win7? Did you burn it yourself using an image burner like ImgBurn at 4x speed? If not burn another DVD after confirming the ISO integrity or downloading another.
My System SpecsSystem Spec
15 Jan 2012   #8
cluberti

Windows 10 Pro x64
 
 

GR is correct - you only see that error message when the source you're using to install from is corrupt or damaged. If you downloaded the ISO and burned it, make sure the MD5 and CRC checksums of the ISO match the original source, and if you're going to install from DVD rather than USB (and USB is preferable, if you can do it), then you need to make sure you burn at the slowest possible speed before using the media.
My System SpecsSystem Spec
16 Jan 2012   #9
wanchoo

Windows 7 Pro with SP1 32bit
 
 

Normally most of the drivers are there in the Installation DVD but the problem that you are facing occurs when installing Windows 7 on old machines. I too faced the same problem on my old Desktop because the installation DVD did not install the ethernet, audio and video drivers.

I then searched the Net for the Drivers on my Laptop. I found the driver for ethernet on the Net, the driver for audio at the Microsoft Update site and no driver for the video adapter. For the video adapter I had to use the old XP driver in the "XP with SP3 compatible mode" and luckily it worked. In this way my old Desktop Computer was up and running with Windows 7 Pro.

You might perhaps try the same.
My System SpecsSystem Spec
16 Jan 2012   #10
gregrocker

 

The error is almost always a bad installer. Confirm ISO or download another, burn a new DVD using ImgBurn at 4x speed.

If this fails, try writing ISO to flash stick using Universal USB Installer with Win7 in dropdown menu. Boot under USB, Removable or HD's.

Where did you get Win7?
My System SpecsSystem Spec
Reply

 No device drivers were found while installing Windows 7




Thread Tools




Similar help and support threads
Thread Forum
Windows 7 installation error: 'No device drivers were found.'
Hello! I am currently trying to install windows 7 onto my laptop. I had recently used a program called DBAN to completely wipe my computer, and that involved windows 7. I'm using a USB flashdrive with the windows 7 .ISO file on it. I had successfully started the installation process when I booted...
Installation & Setup
No device Drivers found when installing Win 7 on USB!!!!
Im installing windows 7 on a usb i got a 150 gb hard drive this is the link to my specs : HP Support document - HP Support Center I am installing it on a fresh formatted usb stick PLEASE HELP then before this happened it said: Setup was unable to create a new system partition ! im really...
Installation & Setup
No Device Drivers were found Windows 7 installation
Hello all, I recently built a desktop so that I could play SWTOR, all the parts were salvaged from other computers, but they are all working and compatible, to the best of my knowledge, except for the hard drive, which was broken, so I went out and bought a Western Digital 1 TB hard drive and a new...
Installation & Setup
installing windows 7 "No device drivers were found"
I have a HP ML110g5 server which I have disconnected the smart array and connected a HDD via sata directly to the motherboard. when installing windows 7 "No device drivers were found etc." does anyone know where I can get the drivers (I assume for the HDD) so windows will recognise where to...
Drivers
No device drivers were found error, installing Windows 7 from Vista
First of all, this is my first post on this forum. (Hurray!) Only because most computer related issues I can fix myself with the help of the internet. However after trying to fix this for about 2 days now this is my last resort. Before you ask yes I have HUNTED through the internet trying to fix...
Installation & Setup
Trouble installing Win 7 x64 on Aspire 4750G - No Device Drivers Found
I recently bought an Acer Aspire 4750G with no Windows pre-installed (i.e DOS). I downloaded Windows 7 x64 Professional Edition .iso from the official MSDNAA website. I used Windows 7 USB/DVD Download Tool (run on Windows XP SP3) to create a bootable USB flashdisk (Sandisk Cruzer Blade 8.0GB)....
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:04.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App