Dual Boot Win 7 Ultimate x64 issues

Page 1 of 2 12 LastLast

  1. Posts : 40
    Windows 7 Ultimate x64 SP1
       #1

    Dual Boot Win 7 Ultimate x64 issues


    I am currently running Win 7 Ultimate x64 on (2) HDDs. To chose which to boot from I go into my bios boot menu. This was working fine when I was DBing Ubuntu/Win 7 but now that I am DBing Win 7/Win 7 its causing issues. I keep getting a start up file system error then check disk starts but wont run. It eventually boots up properly after the 2nd check disk attempt.

    I'm thinking its because I now have (2) C drives and Windows doesn't like it. I will eventually be installing yet another HDD with Ubuntu on it so I would like to get it working now but be set up for the triple boot in the near future. I've never done a dual boot before win/Ubuntu so any help will be much appreciated.

    Also both of my boot drives have a 100MB partition. Not sure what that's about or if it matters but Windows put it there.
      My Computer


  2. Posts : 11,408
    ME/XP/Vista/Win7
       #2

    Try using the one time boot menu.

    Dual Boot Win 7 Ultimate x64 issues-ga-bios-12.png
      My Computer


  3. Posts : 40
    Windows 7 Ultimate x64 SP1
    Thread Starter
       #3

    theog said:
    Try using the one time boot menu.

    Dual Boot Win 7 Ultimate x64 issues-ga-bios-12.png
    That's the one I've been using. But all of the sudden its coming up with the file system error.

    I have noticed that when I'm using my main win 7 boot drive my secondary Win 7 boot drive becomes I: and the same when I go to boot off the secondary, the main Win 7 drive becomes I:. I believe its the changing of the drive letters that's screwing things up.

    Is there a way for me to use the windows boot manager to do this?
      My Computer


  4. Posts : 19,383
    Windows 10 Pro x64 ; Xubuntu x64
       #4

    Hi Joe,

    When it comes to the Ubuntu option, because you are installing that to a totally separate disk, it makes it a whole lot easier. Once you have installed Ubuntu to the 2nd disk, you have two options for boot:

    1. Use the one time boot menu that theog referenced above, or
    2. Use the FREE version of EasyBCD to add the Ubuntu boot option to the bootloader, as shown in my Windows 7+Linux Mint 12 bootloader image below.

    Note : the FREE version of BCD is at the very bottom of the page - no payment or registration is required.

    Let is know if you need more help when you get around to that - its quite straightforward if you keep Ubuntu to its own disk.

    Regards,
    Golden
    Attached Thumbnails Attached Thumbnails Dual Boot Win 7 Ultimate x64 issues-capture.jpg  
      My Computer


  5. Posts : 40
    Windows 7 Ultimate x64 SP1
    Thread Starter
       #5

    OK thank you I'll take a look at that. It sounds simple enough. Is that a Linux program or will that run in windows so I can do something with my Dual Win 7 issue I'm having now?
      My Computer

  6.    #6

    I'd continue using the one-time BIOS Boot menu to keep the HD's independent and unaffected by GRUB which won't be needed if you do this. GRUB can irreparably corrupt Win7.

    The problem with the auto-Disk Check is not related to dual booting via BIOS since Windows cannot even see the other OS(es) in that case. It is more likely disk corruption of some sort requiring testing the HD with maker's HD Diagnostic extended CD scan, or wiping the HD with Diskpart Clean Command before reinstall to remove boot sector corruption - possibly GRUB? Follow the HD Diagnostics with full Disk Check run from Command Line.
      My Computer


  7. Posts : 177
    Windows 7 HP / Ultimate x64
       #7

    will that run in windows so I can do something with my Dual Win 7 issue
    This is a good starting point.
      My Computer


  8. Posts : 40
    Windows 7 Ultimate x64 SP1
    Thread Starter
       #8

    I'm not using GRUB since I no longer have a boot drive with Ubuntu on it. When I had the Ubuntu /Win7 dual HDD set up the bios 1 time boot was working because Windows (C:) did not recognize the Ubuntu drive (C:). Now that I have switched to 2 HDDs both with Win 7 on them and both C: when I boot from one it changes the others drive letter to I: then once I switch back its having issues due to the drive letter change. I'm only speculating as I have no idea really. As of right now I installed EasyBCD and one of the 2 drives booted fine. I have not tried my main yet. Oddly enough now that I'm thinking about it none of this started till last night when I plugged my TV back into my machine to watch a movie. I have another thread on that which is a whole other mess. Ill update again once I boot to my second drive and see if the error still happens. Both HDDs are only a month old. One is a WD the other a Seagate. I can't see them both getting corrupt at the exact same time. That's entirely too hokey.
      My Computer

  9.    #9

    If you correctly install Win7 by booting the installer it will always see itself as C when booted into it. It doesn't matter what letter is given when it's not booted.

    I would keep the HD's independent booted via BIOS Boot Order and one-time Boot Menu key - always the best arrangement when Dual Booting with separate HD's.
      My Computer


  10. Posts : 40
    Windows 7 Ultimate x64 SP1
    Thread Starter
       #10

    OK. Any idea what could be causing both HDDs to have the corruption error at the same time?
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 02:53.
Find Us