Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 Instalation CD error

13 Feb 2012   #11
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

i tired wipeing the sdds and i have 4 disks and it says there is no free space or used space says no media


My System SpecsSystem Spec
.
13 Feb 2012   #12
gregrocker

 

Unplug all but one drive and all peripherals.

If the previous steps don't work, boot free Partition Wizard
bootable CD to see if it shows the drive(s). Post back a camera snap if you can.

Create a Primary NTFS partition on your target drive and mark it Active, then try install.
My System SpecsSystem Spec
13 Feb 2012   #13
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

how do i unplug a drive and what are peripherals
My System SpecsSystem Spec
.

13 Feb 2012   #14
gregrocker

 

The opposite way from how you installed it. Be sure to power down first.
My System SpecsSystem Spec
13 Feb 2012   #15
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

ok so the drive is now physically out
My System SpecsSystem Spec
13 Feb 2012   #16
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

do i power on without it?
My System SpecsSystem Spec
13 Feb 2012   #17
gregrocker

 

Remove all of the HD's except the one you want to install upon.

Then try install. Report back exact error message text and when it occurs: Clean Install Windows 7

If this fails, reset the BIOS to defaults, set SATA controller to AHCI to try install, then IDE if it fails.

Then work through the other steps given including creating a Primary Active partition with PW CD.
My System SpecsSystem Spec
13 Feb 2012   #18
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

how would i select just a single hard drive cause mine is in 2 partions it automaticaly does that when i bought my new hard drive it was blank then after i checked it it was put into 2
My System SpecsSystem Spec
13 Feb 2012   #19
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I was just given this error it was at 9:46 and it was at 6%


Attached Images
Windows 7 Instalation CD error-imageuploadedbysevenforums1329194825.746568.jpg Windows 7 Instalation CD error-imageuploadedbysevenforums1329194869.069483.jpg 
My System SpecsSystem Spec
13 Feb 2012   #20
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Just tried it again and after clicking continue it said this and a cd is already in their also when I went to browse for one I found this


Attached Images
Windows 7 Instalation CD error-imageuploadedbysevenforums1329194946.664411.jpg Windows 7 Instalation CD error-imageuploadedbysevenforums1329194985.824961.jpg 
My System SpecsSystem Spec
Reply

 Windows 7 Instalation CD error




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windwos 7 instalation problems (can't get to final instalation stage).
First of all hello :) Yesterday I was trying to reinstall system on my friends laptop. It's a Samsung ultrabook with 500gb hdd and 16gb ssd. It had a recovery partition with Windows 7 OEM but since she had Windows 7 Ultimate she decided to go for it instead. After getting to installation...
Installation & Setup
Windows 7 NG Instalation Courrupted
Hello, Last saturday as usual power got cut off because 7 people live here and all of them use electric heaters because the landlord is too greedy to turn on heating lol. Now this has happened alot and never resulted in any problems however this time the power was off and like 15 times within...
Installation & Setup
Relocate User folders during Win7 instalation error
I am doing a fresh install on a new system. I followed the directions to use Audit Node to create accounts on another disk. When I entered the commend Sysprep.exe /audit /reboot /unattend:C:\relocate.xml i recieved the following error message: "System Preparation Tool 3.14 Windows could not parse...
Installation & Setup
BSOD Ever since Windows 7 Instalation
Hi Guys, My machine is showing BSOD ever since I installed Windows 7 Professional. Its not associated with any programs, webpages or opening files. I get at-least 2 BSODs EVERYDAY:mad: My machine shows a BSOD every morning within 5mins after starting up. Then I should do a proper shutdown &...
BSOD Help and Support
Windows 7 instalation Issue
after the first couple restarts during installation, the monitors turn off. the computer stops sending the signal to them. i tried rebooting and making it go in safe mode but it wont let me because its still in the installation process.
Installation & Setup
no sound after instalation windows 7
hello I just installed in my notebook LENOVO N100 the windows 7 .Everything working fine except the sound ...no sound at all . my sound card model is : Device Audio : 82801G (ICH7 Family) High Definition Audio Device Audio : 82801G (ICH7 Family) High Definition Audio Audio Playback : Digital...
Sound & Audio


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:58.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App