Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 Instalation CD error

15 Feb 2012   #31
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

It had got to 56% with the USB then it said to verify the installation source


My System SpecsSystem Spec
.
15 Feb 2012   #32
gregrocker

 

Then try a new ISO since the installer is clearly bad: Win7 Home Premium x64 SP1 English Official ISO download

Burn to DVD or write to flash stick using Windows 7 USB-DVD Download Tool

Boot the stick, wipe the HD first: SSD - HDD Optimize for Windows Reinstallation
My System SpecsSystem Spec
15 Feb 2012   #33
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

i was already using that one is it ok if i dont use the latest wont it update its self?
My System SpecsSystem Spec
.

15 Feb 2012   #34
gregrocker

 

It's likely you have a bad installer - either the ISO is not intact or the DVD is burned badly.

Confirm the ISO or download another, burn DVD using ImgBurn at 4x speed, or write to flash stick using Universal USB Installer
My System SpecsSystem Spec
15 Feb 2012   #35
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Ok so the USB worked I download windows and installed it and I was typing in he product number when I was the it wrong and it froze to I turned it off and started the comp normaly and I got this


Attached Images
Windows 7 Instalation CD error-imageuploadedbysevenforums1329360836.901106.jpg 
My System SpecsSystem Spec
15 Feb 2012   #36
gregrocker

 

Make sure the Win7 drive remains set to boot first, or unplug the other HD's.

Did the install complete? It normally asks for Product Key at the beginning of install. Why did you shut it down if it only froze?

If the install completed and booted into Windows then boot into the installer's System Recovery Options to run Startup Repair repeatedly.

If it froze before install completed, then test your RAM - Test with Memtest86+

Next reboot and enter BIOS setup, set BIOS to defaults, then set SATA controller to AHCI to try install again.
My System SpecsSystem Spec
15 Feb 2012   #37
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Half the time I try to load the USB it dosent work and I can only get into boot menu sometimes and I did get into the startup repair it said it fixed it and said reboot but still nothing
My System SpecsSystem Spec
16 Feb 2012   #38
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

When I go to try and reinstall it says no drives where found
My System SpecsSystem Spec
16 Feb 2012   #39
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

And for repairing I get no drives and when I click to find one I look for this


Attached Images
Windows 7 Instalation CD error-imageuploadedbysevenforums1329369706.731106.jpg 
My System SpecsSystem Spec
16 Feb 2012   #40
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Well we took it to some computer people and they said it is now fried..
My System SpecsSystem Spec
Reply

 Windows 7 Instalation CD error




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windwos 7 instalation problems (can't get to final instalation stage).
First of all hello :) Yesterday I was trying to reinstall system on my friends laptop. It's a Samsung ultrabook with 500gb hdd and 16gb ssd. It had a recovery partition with Windows 7 OEM but since she had Windows 7 Ultimate she decided to go for it instead. After getting to installation...
Installation & Setup
Windows 7 NG Instalation Courrupted
Hello, Last saturday as usual power got cut off because 7 people live here and all of them use electric heaters because the landlord is too greedy to turn on heating lol. Now this has happened alot and never resulted in any problems however this time the power was off and like 15 times within...
Installation & Setup
Relocate User folders during Win7 instalation error
I am doing a fresh install on a new system. I followed the directions to use Audit Node to create accounts on another disk. When I entered the commend Sysprep.exe /audit /reboot /unattend:C:\relocate.xml i recieved the following error message: "System Preparation Tool 3.14 Windows could not parse...
Installation & Setup
BSOD Ever since Windows 7 Instalation
Hi Guys, My machine is showing BSOD ever since I installed Windows 7 Professional. Its not associated with any programs, webpages or opening files. I get at-least 2 BSODs EVERYDAY:mad: My machine shows a BSOD every morning within 5mins after starting up. Then I should do a proper shutdown &...
BSOD Help and Support
Windows 7 instalation Issue
after the first couple restarts during installation, the monitors turn off. the computer stops sending the signal to them. i tried rebooting and making it go in safe mode but it wont let me because its still in the installation process.
Installation & Setup
no sound after instalation windows 7
hello I just installed in my notebook LENOVO N100 the windows 7 .Everything working fine except the sound ...no sound at all . my sound card model is : Device Audio : 82801G (ICH7 Family) High Definition Audio Device Audio : 82801G (ICH7 Family) High Definition Audio Audio Playback : Digital...
Sound & Audio


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:44.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App