Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 Instalation CD error

16 Feb 2012   #41
gregrocker

 

What is fried?? The HD? As of your last posts you have mobo function, power and are booting disks. This is fried?


My System SpecsSystem Spec
.
16 Feb 2012   #42
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

The people we took It to said it was fried I dont know but I am going to take it to geek squad to see what they have to say about it
My System SpecsSystem Spec
16 Feb 2012   #43
gregrocker

 

OK let us know what you find out.
My System SpecsSystem Spec
.

17 Feb 2012   #44
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

The hd is fine but aperrently the motherboard is gone
My System SpecsSystem Spec
06 Mar 2012   #45
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I got my computer back after a while and I loaded it up it said windows had an unexpected shutdown so I loaded normaly and It said windows is loading but the logo didn't show up and 1 minuet of it loading it shut down and now it's stuck at the main screen with the f9 f11 etc options
My System SpecsSystem Spec
06 Mar 2012   #46
gregrocker

 

Didn't you just take it to a shop? Did they charge you to fix it? What did they find?

If you paid to fix it I would take it back and tell them they need to fix it correctly which is what you paid for.
My System SpecsSystem Spec
07 Mar 2012   #47
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

We did take it to them we paid for a diagnostic and then they claimed that our motherboard was fried and Said they would fix it and that never came around so we decided to take it back I don't know if he's right cause he was wrong quite a few times
My System SpecsSystem Spec
07 Mar 2012   #48
gregrocker

 

Reinstall the new HD you first wrote about. Make sure it is installed securely and then look in BIOS setup to see if it shows up.

If so, boot the Win7 installer and see if it detects the HD for install. Install WIn7 following these steps: Clean Install Windows 7

What is the make and model of your computer? Fill in more of your System Specs in bottom left corner of your post if possible.

You repeatedly refer to more than one Hard Drive. Do you have another HD to try installing alone. Does it show in BIOS.

If you can enter BIOS setup then the mobo may be OK. But you need to get the HD to show up in BIOS so we can proceed..
My System SpecsSystem Spec
07 Mar 2012   #49
ToxicXGL

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I pressed f10 to go into set up and it gave me this


Attached Images
Windows 7 Instalation CD error-imageuploadedbysevenforums1331164076.147076.jpg 
My System SpecsSystem Spec
07 Mar 2012   #50
gregrocker

 

What is the F10 key used for on your computer? Have you used it for this before?

If you are trying to boot the disk use this: How to Boot your Computer from a Bootable CD or DVD
My System SpecsSystem Spec
Reply

 Windows 7 Instalation CD error




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Windwos 7 instalation problems (can't get to final instalation stage).
First of all hello :) Yesterday I was trying to reinstall system on my friends laptop. It's a Samsung ultrabook with 500gb hdd and 16gb ssd. It had a recovery partition with Windows 7 OEM but since she had Windows 7 Ultimate she decided to go for it instead. After getting to installation...
Installation & Setup
Windows 7 NG Instalation Courrupted
Hello, Last saturday as usual power got cut off because 7 people live here and all of them use electric heaters because the landlord is too greedy to turn on heating lol. Now this has happened alot and never resulted in any problems however this time the power was off and like 15 times within...
Installation & Setup
Relocate User folders during Win7 instalation error
I am doing a fresh install on a new system. I followed the directions to use Audit Node to create accounts on another disk. When I entered the commend Sysprep.exe /audit /reboot /unattend:C:\relocate.xml i recieved the following error message: "System Preparation Tool 3.14 Windows could not parse...
Installation & Setup
BSOD Ever since Windows 7 Instalation
Hi Guys, My machine is showing BSOD ever since I installed Windows 7 Professional. Its not associated with any programs, webpages or opening files. I get at-least 2 BSODs EVERYDAY:mad: My machine shows a BSOD every morning within 5mins after starting up. Then I should do a proper shutdown &...
BSOD Help and Support
Windows 7 instalation Issue
after the first couple restarts during installation, the monitors turn off. the computer stops sending the signal to them. i tried rebooting and making it go in safe mode but it wont let me because its still in the installation process.
Installation & Setup
no sound after instalation windows 7
hello I just installed in my notebook LENOVO N100 the windows 7 .Everything working fine except the sound ...no sound at all . my sound card model is : Device Audio : 82801G (ICH7 Family) High Definition Audio Device Audio : 82801G (ICH7 Family) High Definition Audio Audio Playback : Digital...
Sound & Audio


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:41.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App