Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Window 7 installation help needed

13 Apr 2012   #11
Gautamster

Window XP 32 bit
 
 

continuous beeps after completing installation of windows 7(checking video performance etc..). Installed fine but on final restart after installation stuck on black screen and on restart after black screen give continuous beeps.


My System SpecsSystem Spec
.
13 Apr 2012   #12
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Can you post your system specs, we need to know what your computer is.

Generally, continuous beeps mean memory or graphics card error.

Did you install your graphics card and re-boot?
My System SpecsSystem Spec
13 Apr 2012   #13
Gautamster

Window XP 32 bit
 
 

Window Xp 32 Bit
Core 2 Duo 2.4 GHz,
Intel DG41WV Motherboard,
2GB DDR3 Ram,
360 GB Hard Disk

And I used Nvidia 256mb GeForce 7300/7200 graphic card on this motherboard but it got defective after some days and i removed it.

Please reply the solution of this problem, after installation of window 7, stucks on black screen and on restart give continuous beep.
My System SpecsSystem Spec
.

15 Apr 2012   #14
Gautamster

Window XP 32 bit
 
 

Nobody replied, Nobody knows about my problem?

Window XP 32 bit, Intel DG41 WV motherboard, CPU 2.4 GHz, Ram DDR3, 360 GB hard Disk, and I have used graphic card of nvidia 7300/7200 but it got defective after sometime and i removed it.

After completing installation, window 7 stuck on black screen and on restart computer give continuous beep.
My System SpecsSystem Spec
15 Apr 2012   #15
Brink

64-bit Windows 10 Pro
 
 

Quote   Quote: Originally Posted by Brink View Post
Guatamster,

Are you able to just install Windows 7 to dual boot with XP using OPTION ONE in the tutorial below?

Dual Boot Installation with Windows 7 and XP
Quote   Quote: Originally Posted by Gautamster View Post
I have not tried dual boot. But Let me tell you my problem again.
I tried Device manager installation, it didn't worked for me. When I install window 7 it just install fine but after completing installation it checks video performance and all. And after the final restart it does not show any desktop. After all installation, stucks on black screen, I don't know why it is not working. I changed my cd rom once from ata to sata one and graphic card is removed.
Guatamster,

Please try the method above to see how that works for you instead, and let us know how it went.
My System SpecsSystem Spec
15 Apr 2012   #16
gregrocker

 

Are you using the onboard graphics chip now with the failed video card removed? Look in BIOS setup to make sure your current display device is enabled correctly, and not outputted to any TV card or other output than VGA monitor.

Test your RAM for 5-6 passes or overnight: RAM - Test with Memtest86+

Unplug all other HD's and peripherals, boot the Win7 DVD to wipe the HD with Diskpart Clean Command using DISKPART At PC Startup.

Clean Install Windows 7. If it hangs again then follow these steps to enter Device Manager during install to Uninstall any drivers showing in error - especially Display driver - to see if Install will complete so you can update driver from desktop: Device Manager - Access During Windows 7 Installation

You referred repeatedly to Win7 installing via Device Manager. What do you mean?
My System SpecsSystem Spec
15 Apr 2012   #17
Brink

64-bit Windows 10 Pro
 
 

Quote   Quote: Originally Posted by gregrocker View Post

You referred repeatedly to Win7 installing via Device Manager. What do you mean?
Hello Greg,

He meant via this.

Device Manager - Access During Windows 7 Installation
My System SpecsSystem Spec
15 Apr 2012   #18
gregrocker

 

What do you find when you enter Device Manager during install? Which devices are in error? Are you uninstalling them to allow install to complete? Please explain fully.

Could be a setting in BIOS that was changed when OP installed then uninstalled video card. Those need to be gone over carefully. Sounds like it could be outputting wrongly, e.g. to a TV tuner or projector. Is the onboard graphics chip fully enabled and what are its settings?

Is it possible you damaged the mobo during video card install/uninstall?

Is the idea to install XP to see if it replicates the display issue?
My System SpecsSystem Spec
26 Apr 2012   #19
Gautamster

Window XP 32 bit
 
 

I had a graphic card on my motherboard But after sometime graphic card got defective and after that i ran my pc without graphic card, after some days when i tried to install window 7, after completing installation window stucks on black screen and on restart pc gives continuous beeps. I tried device manager installation it shows yellow mark on many drivers. Video drivers and many more..I have tried to uninstall all, But i didn't wiped hard disk fully? my motherboard is new, its intel dg41wv.
My System SpecsSystem Spec
26 Apr 2012   #20
Gautamster

Window XP 32 bit
 
 

I had a graphic card on my motherboard But after sometime graphic card got defective and after that i ran my pc without graphic card, after some days when i tried to install window 7, after completing installation window stucks on black screen and on restart pc gives continuous beeps. I tried device manager installation it shows yellow mark on many drivers. Video drivers and many more..I have tried to uninstall all, But i didn't wiped hard disk fully? my motherboard is new, its intel dg41wv. XP works fine everytime no errors.
My System SpecsSystem Spec
Reply

 Window 7 installation help needed




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
help needed window not start
i have window 7 32 bit ultimate intalled but after one month it not booting stuck in window starting i try to open safe mode but not open i m try to recovered it intalling cd but stuck in window starting what i do even window xp not installed i dont know why plz help
Hardware & Devices
Format needed for new SSD and HDD in Windows 7 fresh installation?
I am putting together my own computer and am putting in a 1TB HDD and 120GB SSD. Seems as I cannot get a definitive understanding of whether or not I need to format and partition each of these drives. I want to install Windows 7 on the SSD and use the HDD for other programs and data. So do I format...
Installation & Setup
Windows 7 installation to SDD drive - help needed
Hi all, I'm having problems with the installation of win7 to my desktop' SDD drive. Hopefully this is posted to the right place. Problem started when I added SDD drive to my desktop and started the installation, having one windows already installed to my HDD in desktp. First, I formatted...
Installation & Setup
Help Needed....BSOD during Windows 7 Installation
Hi Everyone, It's a sad day:( - my PC was turned off at the wall switch sometime during the boot-up/load. I couldn't get it too reboot after this, and system restore just resulted in a BSOD (I dont have the details for that BSOD unfortunately). I decided to re-install from scratch using 2 x...
Installation & Setup
Windows se7en installation help needed
So i made an bootable iso of windows 7 but when i boot my Windows the Cd doesnt boot:mad: but a black screen appears and a
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:56.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App