Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Another runin with 0x80070570


16 May 2012   #1

Windows 7 Ultimate
 
 
Another runin with 0x80070570

I upgraded last night from a C2D machine to an ivy bridge i5 (MSI z77a-g45, i5-3570k, 4X4GB Patriot PC3 12800 kit). Previously, I was running off a OCZ Solid 3 SSD, with a second OCZ Solid 3 as a cache/swap/temp drive.

New hardware is all in and appears to be running fine, however I can't clean install windows 7 on the SSDs.

AHCI SATA is enabled and MBR created, but every time I go to install it either returns an error during the extraction step (error code 0x80070570, or error code 0xc0000005) or it just blue screens shortly after. Same thing happens with both SSDs.

Most entries suggest that the first error code is symptomatic of bad memory. I one by one tried with each DIMM. No go.

I was able to install Windows onto a HDD with no problems (with all 16GB installed), so it seems to be related to the SSDs (though with my Core2 system the same drives worked).

Any ideas what's going on? Thanks!

My System SpecsSystem Spec
.

16 May 2012   #2
Microsoft MVP

 

Unplug all but 2gb RAM to try install. You can replace RAM afterwards. Then test your RAM - Test with Memtest86+ for 5-6 passes.

Where did you get Windows 7? Did you burn the DVD yourself? Try writing the official ISO to flash stick to boot and install: Clean Reinstall - Factory OEM Windows 7.

Reset BIOS to defaults, set SATA controller to AHCI to try install, then IDE mode. Unplug all other HD's and peripherals.

If there is an EFI boot disk in BIOS Boot Order, remove it. Set SSD first to boot in BIOS setup, then use one-time BIOS Boot Menu key given on first screen to boot DVD or flash stick.

Fill in your System Specs in bottom left corner of post.
My System SpecsSystem Spec
16 May 2012   #3

Windows 7 Ultimate
 
 

Quote   Quote: Originally Posted by gregrocker View Post
Unplug all but 2gb RAM to try install. You can replace RAM afterwards. Then test your RAM - Test with Memtest86+ for 5-6 passes.
Well, they're 4GB DIMMs, but I've tried each one individually.

I'm not sure I understand how it could be a memory error when it installs fine onto a HDD. Seems to be directly associated with SSD.



Where did you get Windows 7? Did you burn the DVD yourself? Try writing the official ISO to flash stick to boot and install: Clean Reinstall - Factory OEM Windows 7. [/QUOTE]

I'll try that. It's a disk I burned a couple years ago from my OEM.

Quote   Quote: Originally Posted by gregrocker View Post
Reset BIOS to defaults, set SATA controller to AHCI to try install, then IDE mode. Unplug all other HD's and peripherals.
I've tried it both ways (AHCI, IDE). Only other peripherals are video and network. I'll unplug the network card, but need the video (monitor is DVI).
My System SpecsSystem Spec
.


16 May 2012   #4
Microsoft MVP

 

Does this mean it's a Factory Recovery disk? What download does your OEM provide?

Do you have a COA sticker on the machine with readable Product Key?
My System SpecsSystem Spec
16 May 2012   #5

Windows 7 Ultimate
 
 

Quote   Quote: Originally Posted by gregrocker View Post
Does this mean it's a Factory Recovery disk? What download does your OEM provide?

Do you have a COA sticker on the machine with readable Product Key?
Not any more; that machine is gone. Before I got rid of it, I created a Windows 7 disk from the install. I have that product key. It's what I used to install with the previous system and last night with the HDD.
My System SpecsSystem Spec
16 May 2012   #6
Microsoft MVP

 

How did you create a Windows 7 disk from an installation? It requires an installer ISO file which is nowhere present in a Windows 7 installation.

Was this departed installation Factory OEM or retail OEM? Either cannot migrate beyond the original mobo they were installed upon. Only Full or Upgrade retail versions can migrate.
My System SpecsSystem Spec
16 May 2012   #7

Windows 7 Ultimate
 
 

Quote   Quote: Originally Posted by gregrocker View Post
How did you create a Windows 7 disk from an installation? It requires an installer ISO file which is nowhere present in a Windows 7 installation.
It's possible I downloaded it from digital river. Honestly I don't remember. It is a legitimate copy though, and has worked on my previous home-brew system (on SSD) as well as this one (not on SSD).
My System SpecsSystem Spec
16 May 2012   #8
Microsoft MVP

 

What license do you own? Retail OEM, Upgrade or Full version? Where is the Product Key located?
My System SpecsSystem Spec
16 May 2012   #9

Windows 7 Ultimate
 
 

Quote   Quote: Originally Posted by gregrocker View Post
What license do you own? Retail OEM, Upgrade or Full version? Where is the Product Key located?
I suspect Retail OEM (from Dell). Product key is on a piece of paper I have with the install disk...
My System SpecsSystem Spec
16 May 2012   #10
Microsoft MVP

 

If this came with a Dell computer then it is locked to that mobo.

Did you pay retail for the disk as it might be a Dell branded Upgrade version which can also migrate like other Windows retail media? Did the key come from the COA sticker affixed to machine, or was it provided by Dell as would indicate a retail software purchase?

Have you installed it on other mobos successfully? Did it require a phone call to activate?

You can call or chat with Dell Support to find out if it can migrate or you can try installing it to see if it will activate - especially if it has migrated successfully before.
My System SpecsSystem Spec
Reply

 Another runin with 0x80070570




Thread Tools



Similar help and support threads for2: Another runin with 0x80070570
Thread Forum
Solved 0x80070570 when installing win 7 Installation & Setup
Another 64 it 0x80070570 error Installation & Setup
0x80070570 error says cant copy General Discussion
Error 0x80070570 Please help! Installation & Setup
error 0x80070570 Installation & Setup
0x80070570 Error Installation & Setup
0x80070570 error ... :( Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:40 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33