Reinstalling Windows 7 - Delete vs Format

Page 1 of 3 123 LastLast

  1. Posts : 8
    Windows 7 Professional 64bit
       #1

    Reinstalling Windows 7 - Delete vs Format


    Hello. I'm new to the forum, so I apologize if this question has been brought up. I got my new computer about 3 weeks ago, but because the video card I picked was out of stock (GTX 680) they installed a standard video card (GT 520) instead. I'll be getting my GTX 680 tomorrow, and I'm thinking about doing a clean installation with Windows 7. I've already installed Windows 7 once when I received my computer, and made a few registry changes 'cause I have an SSD.

    I guess my question is, I'm not quite sure if I should delete or format my SSD and HDD when doing a clean installation. Also, I own an Intel SSD and I read online that it's better to use the Intel Solid-State Drive Toolbox when resetting the drive to its original rather than deleting/formatting. Here's a link to the toolbox: http://downloadcenter.intel.com/Deta...&DwnldID=18455

    Any help would be appreciated.
      My Computer


  2. Posts : 1,533
    Windows 7 Professional x64 Service Pack 1
       #2

    Pongsona said:
    Hello. I'm new to the forum, so I apologize if this question has been brought up. I got my new computer about 3 weeks ago, but because the video card I picked was out of stock (GTX 680) they installed a standard video card (GT 520) instead. I'll be getting my GTX 680 tomorrow, and I'm thinking about doing a clean installation with Windows 7. I've already installed Windows 7 once when I received my computer, and made a few registry changes 'cause I have an SSD.

    I guess my question is, I'm not quite sure if I should delete or format my SSD and HDD when doing a clean installation. Also, I own an Intel SSD and I read online that it's better to use the Intel Solid-State Drive Toolbox when resetting the drive to its original rather than deleting/formatting. Here's a link to the toolbox: http://downloadcenter.intel.com/Deta...&DwnldID=18455

    Any help would be appreciated.
    You can format the drive. Be sure to delete all partitions in the Windows 7 setup and install it completely fresh.
      My Computer


  3. Posts : 8
    Windows 7 Professional 64bit
    Thread Starter
       #3

    Sorry for being such a computer noob, but what do you mean by "be sure to delete all partitions in the Windows 7 setup"? I didn't create extra partitions as I have my C drive - which is my SSD; and my D drive - which is my HDD. So, does that mean I should just click on format for both SSD and HDD when it gets to this screen?



    Thanks.
      My Computer


  4. Posts : 1,872
    Windows 10 Pro x64, Windows 8.1 Pro x64, Windows 7 Ultimate x64 SP1,
       #4

    For the SSD it is better to secure erase it with the Intel tools and then install the operating system. You do not need to format it first.

    If you use the SSD for data and not the operating system, then just quick format the drive. A full format just wears it out quicker and is unnecessary.
      My Computer


  5. Posts : 8
    Windows 7 Professional 64bit
    Thread Starter
       #5

    pbcopter said:
    For the SSD it is better to secure erase it with the Intel tools and then install the operating system. You do not need to format it first.

    If you use the SSD for data and not the operating system, then just quick format the drive. A full format just wears it out quicker and is unnecessary.
    I tried doing Secure Erase with the Intel SSD Toolbox, but I was getting "the selected drive has a partition. The partition must be removed in order to execute this feature." So I went to my Disk Management and here's the SS:

    Does this mean I have to remove "System Reserve" if I want to perform Secure Erase?

    Thank you.
      My Computer


  6. Posts : 10,200
    MS Windows 7 Ultimate SP1 64-bit
       #6

    Pongsona said:
    Hello. I'm new to the forum, so I apologize if this question has been brought up. I got my new computer about 3 weeks ago, but because the video card I picked was out of stock (GTX 680) they installed a standard video card (GT 520) instead. I'll be getting my GTX 680 tomorrow, and I'm thinking about doing a clean installation with Windows 7. I've already installed Windows 7 once when I received my computer, and made a few registry changes 'cause I have an SSD.

    I guess my question is, I'm not quite sure if I should delete or format my SSD and HDD when doing a clean installation. Also, I own an Intel SSD and I read online that it's better to use the Intel Solid-State Drive Toolbox when resetting the drive to its original rather than deleting/formatting. Here's a link to the toolbox: http://downloadcenter.intel.com/Deta...&DwnldID=18455

    Any help would be appreciated.
    The simple, straight-forward answer: FORMAT.

    Now with that said, it is may very, very strong recommendation that you read this tutorisl:
    Clean Reinstall - Factory OEM Windows 7

    Don't let that title mislead you. This one is the motherlode that covers or points to all possible situations.

    My personal approach:
    using a system repair disc, I use diskpart and clean all to wipe the disk 100% clean.Disk - Clean and Clean All with Diskpart Command
    then I install Win 7.

    don't muck around with or use any of the special ssd software. That's only for those Unix/Liinux people. Win 7 is very smart and correctly handles every aspect of a SSD.
      My Computer


  7. Posts : 2,913
    Windows 7 Ultimate x64 SP1
       #7

    I agree with Karl - don't bother with the SSD tools because for normal stuff (like an OS install) they are not necessary. The only time they might be necessary is if there's a serious issue with getting any OS to see and utilize the drive, IMHO.

    I've been installing various Windows OSs on SSDs for quite a while and I've never done anything other than delete and re-create the system reserved and "C" partitions during the install process.
      My Computer


  8. Posts : 8
    Windows 7 Professional 64bit
    Thread Starter
       #8

    kegobeer said:
    I agree with Karl - don't bother with the SSD tools because for normal stuff (like an OS install) they are not necessary. The only time they might be necessary is if there's a serious issue with getting any OS to see and utilize the drive, IMHO.

    I've been installing various Windows OSs on SSDs for quite a while and I've never done anything other than delete and re-create the system reserved and "C" partitions during the install process.
    Hm. Okay. If I format rather than delete, will it reset the drive to its original, out-of-the-box state?
      My Computer


  9. Posts : 10,200
    MS Windows 7 Ultimate SP1 64-bit
       #9

    Define : original, out-of-the-box state.
      My Computer


  10. Posts : 7,878
    Windows 7 Ultimate x64
       #10

    I don't see a reason to reinstall the OS simply to go from a 520 video card to a 680GTX. Maybe I am missing something.
      My Computer


 
Page 1 of 3 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 18:23.
Find Us