Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 ultimate 64 bit gets stuck after loading files.

10 Jun 2012   #1
hitman47222

Windows 7 Ultimate 64-Bit
 
 
Windows 7 ultimate 64 bit gets stuck after loading files.

Ok , I have just bought a new PC 5 hours ago .. I have bought everything GPU/CPU/MOBO/RAM/PSU/CASE .. only thing i did not buy was a HDD and DVD-Rom.. Because i own both and both are only 4 months old.. So i have put the new Parts together.. Then went to old PC , Formatted C drive.. Then added HDD and DVD=ROM from old PC to New one .. Booted and everything was fine except ofc no windows so gave the boot.msgr is missing thingy .. So i put in my Windows DVD .. Set it to boot from DVD .. It boots .. Goes through the "Loading Files" Then it shows me the Windows logo and stays there for a small while.. Then it suddenly turns black with a small gray bar at the bottom... and thats it .. it stays there forever and after some mins i can even here the DVD stops running.. I have uploaded a PIC to help u understand.. Also i tried installing from USB flash drive and same problem.. Help?

Here is the PIC of where i am stuck at *Notice the barely visible gray bar at bottom? :

Here are the parts i bought : http://oi49.tinypic.com/aoar80.jpg (Sorry for it being sideways but not much to be seen anywayz )

XFX Pro 550W
ATI 6850
AMD FX6100
4GB of DDR3 RAM
AsRock 970 Extreme 4 Motherboard
Thermaltake Spacecraft VF-I Case.


My System SpecsSystem Spec
.
10 Jun 2012   #2
Brds7t7

Windows 7 Pro 64-Bit, Windows 7 Ultimate 64-Bit, Windows 8.1 Pro 64-Bit
 
 

Hi hitman47222,

Have you checked all the connections just to make sure everything is okay? Are all the parts brand new with the exception of the hdd?

Maybe try running something like ultimate boot cd to run some diagnostics.

Also how did you format the drive? Did you do a quick format or full? Did you make sure you backed up important files?

Ultimate Boot CD - Overview
My System SpecsSystem Spec
10 Jun 2012   #3
gregrocker

 

In addition to testing your RAM and HD, set SATA controller to AHCI to try install, wipe the HD using Diskpart Clean Command, if necessary try install with only 2gb RAM if possible.
My System SpecsSystem Spec
.

Reply

 Windows 7 ultimate 64 bit gets stuck after loading files.




Thread Tools




Similar help and support threads
Thread Forum
Stuck at "windows is loading files" when doing a system recovery
I'm using laptop lenovo T430U, when doing system recovery process until half ways my laptop no battery then shut down. After that Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem: 1. Insert your windows installation disc and restart your...
Installation & Setup
stuck in window loading files
my dell laptop has been stuck in the 'windows is loading files' for quite some time and no matter how much i tried to press 'ctrl + F11', there's no respond. I tried to press 'F8' to get in the windows manager screen to boot into safe mode but it doesn't respond too.
General Discussion
Windows stuck at loading files, can`t run repair
Ever since I got a power outage friday my PC has been stuck at loading files, so today I managed to get my hands on the Windows instalation DVD, the problem is that I simply can`t run the repair, not even using the DVD, directly through Windows it simply gets stuck on loading files, no mater what...
General Discussion
Installation Stuck After Loading Files.
I've been using Windows 7 Ultimate x64 for the past 2 years. I've been using an Intel D945GCCR motherboard with 2GB RAM. My system had some problems, so I planned to format it. But everytime I try to do it, it gets stuck. When I used a Windows 7 Professional x86 disc, it got stuck after showing...
Installation & Setup
OEM Retail Disc Stuck After Loading Files On New Hardware
Ok, so I bought a new motherboard (GigaByte z68X-ud5-b3) some new RAM and a new i7 2600k CPU and I went to reinstall the OEM windows 7 pro 64 bit I previously had installed on my old motherboard and CPU and RAM and the disc starts loading and after it shows on the white progress bar at the bottom...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:20.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App