Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Big problem!! Please help

06 Sep 2009   #1
usman10255

Windows xp
 
 
Big problem!! Please help

Greetings and peace to all!

I have a problem! Here it is! I burnt the .iso image to a Dvd using isomagic! Then i tried to do a fresh install on of windows 7 on my system! Mind please i am trying to install WINDOWS 7 RTM BUILD 7600 X86. Now i retarted my computer, the DVD booted, and windows 7 loaded its installation files (the white bar completes to the end of the screen). Then windows 7 logo appeared (several colored lights swirl around makes windows logo) and then it freezes there! I tried to boot again n again but same happens! I should also indicate i tried to install windows 7 earlier (1 week ago) too. At that time it did pass through the windows logo screen and successfully got installed! But when it rebooted after installation, it freezes at the same logo scresn please please help! My specs are following:

AMD Athlon x2 3.2 Ghz
2 Gb corsAir RAM
2 Sata HDD 400 Gb
nVidia 8600 Gt vga card


My System SpecsSystem Spec
.
06 Sep 2009   #2
usman10255

Windows xp
 
 

Excuse the spelling mistakes =p! Its hard to write from iPhone =p
My System SpecsSystem Spec
06 Sep 2009   #3
SquonkSC

Win7 Build 7600 x86
 
 

Hi Usman,

Welcome.

Do you have the screen connected through HDMI by any chance?
Or DVI to HDMI?

If so, connect with VGA, install windows, install the latest drivers for your graphics card, and then connect through HDMI again.

I know of several cases where HDMI gave problems like this.

greetz
My System SpecsSystem Spec
.

06 Sep 2009   #4
usman10255

Windows xp
 
 

Quote   Quote: Originally Posted by squonksc View Post
Hi Usman,

Welcome.

Do you have the screen connected through HDMI by any chance?
Or DVI to HDMI?

If so, connect with VGA, install windows, install the latest drivers for your graphics card, and then connect through HDMI again.

I know of several cases where HDMI gave problems like this.

greetz
peace be upon you!

brother... i never even entered into windows 7 s desktop... and i AM using DVI... but i still get the problem... i dont think so it had to do something with graphcis card... i never entered the windows... it freezes at windows 7 s logo... this is far as i ve got...
My System SpecsSystem Spec
06 Sep 2009   #5
SquonkSC

Win7 Build 7600 x86
 
 

Quote   Quote: Originally Posted by usman10255 View Post
peace be upon you!

brother... i never even entered into windows 7 s desktop... and i AM using DVI... but i still get the problem... i dont think so it had to do something with graphcis card... i never entered the windows... it freezes at windows 7 s logo... this is far as i ve got...
And peace to you to.

Now OT,

You are drawing conclusions, and making assumptions, but yet you ask for help.
I want to help you, but you have to let me.
I will repeat what I've said in my previous post, and clarify it a little.

On more than a few occasions, I've seen installs not finishing with HDMI and DVI cables connected.
The Win7 built in driver prevents the install from completing.
Hence, it stops at the startup screen.

When installing with VGA cable, the install finishes ok,
after which you download and install the latest drivers,
after which you can reconnect with DVI again.

Just do this, and see if that fixes your problem.

Greetz, and may the Win7 gods be with you.
My System SpecsSystem Spec
06 Sep 2009   #6
whest

XP, Vista, W7 64bit Home Premium
 
 

Do you get to the stage in setup where you choose which partition to install w7 to (custom install), or does it freeze before that? Did you get that far, and how long did you wait as w7 can take time - mine seemed to freeze 3 times during install for about 5 mins each time. I f you reach the part in setup where you select custom install, and it freezes after that you can restart setup, and when you reach custom install this time delete the partition you intend installing w7 on - then recreate the partition in the empty space, and then continue to install to the new partition - w7 sometimes cant recognise the partition originally created.
My System SpecsSystem Spec
14 Nov 2009   #7
Shmed

Windows 7 Ultimate 64-bit but thinking about going to LInux after this!
 
 

I have the issue with a clean install ona fairly new setup. I can get through the DVD basedpart (boot, select partition, copy files, extractfiles), but after the first reboot, it shows the Win7 logo, then just goes blank. I left it like this overnight and it is still blank.
Rebooted into safe mode,and it seems to stall around the classPNP.sys, but in safe mode it gets passed this point only to error saying that setup can't complete in safe mode.

I am connected through DVI, but I don't have a VGA connector, nor PCI-E vga card. Can MS seriously not sort the installer out to pick up DVI? It's not exactly cutting edge is it?

i HAVE THE LATEST FIRMWARE ON MY mOBO (aSUS K8N-E SLI I think) sorry caps.

Is there any way to 'inject' my graphics card driver into the install process (like a slipstreamed XP install)?
My System SpecsSystem Spec
14 Nov 2009   #8
whest

XP, Vista, W7 64bit Home Premium
 
 

Hmn, you could try what I outlned, sounds similar . Delete that partition and recreate, and see if you can continue to install to the new partition successfully.
My System SpecsSystem Spec
15 Nov 2009   #9
Shmed

Windows 7 Ultimate 64-bit but thinking about going to LInux after this!
 
 

Hi,
I can get to the choose partition every time, and I am installing to a new disk (I won't risk an upgrade as I have a working Vista install at the minute). I have tried deleting all the data prior to install a number of times. I can get past that bit, and I can reboot, and then it tells me it is updating registry settings, starting services and then tells me it is completing the install. After about 5 minutes of that, the screen goes blank, and that is it. No more installing.

I have tried disabling driver signing at boot, unplugged all 'unnecessary' devices and even tried with no monitor connected. Nothing works.

I wouldn't mind, but the W7 compatibility checker tool says my GFX card is tested working with 7, when it quite blatantly doesn't work! If it wasn't for my need of Media Centre, I'd be defecting to Linux now! Never had so much trouble installing Windows!
My System SpecsSystem Spec
Reply

 Big problem!! Please help




Thread Tools





Similar help and support threads
Thread Forum
Computer is crashing.Problem signature: Problem Event Name: BlueScreen
Hi, My computer, Dell optiplex 760 Windows 7 Professional 32-bit, is crashing. The crashes often happen when i'm playing this game, League of legends, but it also crashes at random points while on a social media or gaming websites. How to fix? Help please.
BSOD Help and Support
Blurry Text problem, EDID and registry editing problem on an AMD card.
EDIT:I have found a solution, using a DVI to HDMI cable on an amd card will fix this problem, this thread can now die, hopefully someone else will find it if they have this problem. Basically, i know what the problem is, but not how to rectify it. My tv (Sceptre X235BV-FHD, a rebranded sony...
Graphic Cards
problem event name startup repair offline - slightly different problem
Hi, Hoping somebody can help with this problem which despite trawling through these very helpful forums & tutorials, I have been unable to resolve. I have tried to include all the information possible although I am relatively new to this field so my terminology is probably not completely...
General Discussion
Laptop Windows 7 Problem/Software/Hardware? Keyboard problem
Okay, right now I'm currently trying to find out whats wrong with a keyboard that is on a laptop, after the computer starts there are some script errors, I don't know exactly what they are but I ran combo fix without safe mode and restarted the scripts went away...and it started working after...
Hardware & Devices
Moving windows/icons down problem!! Move right/left/up - no problem
New system i7 3930K CPU Sabertooth X79 Mortherboard GeForce GTX690 GPU Intel 520 series SSD 32GB RAM Dell U2711 27" Monitor Win 7 Pro
General Discussion
Problem Reports and Solutions - Change Problem Reporting Settings
How to Change "Problem Reporting Settings" in Windows 7 and Windows 8 Sending problem reports to Microsoft helps Windows 7 and Windows 8 to check and identify problems and notify you about any found solutions. This tutorial will show you how to change the Problem Reporting Settings in...
Tutorials

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:34.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App