New
#1
Cannot boot up OSX, it freezes at "Starting Darwin 86"
I am trying to install OSX Lion onto my computer build. I have looked through hackintosh forums and this build does work. I was hoping someone here might know anything about this. I have had great help from this forum and am not having any help from other forums. I have seen other osx threads and here is mine.
Here are my system specs
Mobo: Gigabyte GA-Z77X-UD5H Socket 1155 Intel Z77 Chipset Dual Channel DDR3 1600/1333/1066 MHz 3x PCI-Express x16 GigaLAN 7.1-CH HD Audio 5x SATA 6Gb/s 2.4 x SATA 3Gb/s 6x USB 2.0 10x USB
3.0 VGA/DVI/HDMI/DisplayPort ATX
CPU: Intel Core i7-3770 Quad- Core Socket 1155, 3.4Ghz, 8MB L3 Cache, 22nm (Retail Boxed) Gen3 (BX80637I73770)
Case: NZXT Phantom WHITE w/RED Enthusiast Full Tower Case (NZXTPHAN003RD)
SSD: OCZ (VTX4-25SAT3-128G) Vertex 4 2.5" 128GB SATA3 6GB/s Solid State Drive, Read: 560MB/s, Write: 430MB/s
RAM: 64.99 G.SKILL Ripjaws X Series DDR3 1866MHz (PC3-14900) 8GB (2x4GB) Dual Channel Kit (F3-14900CL9D-8GBXL)
PSU: Corsair Enthusiast Series TX850 V2 850W 80PLUS Bronze Certified Power Supply (CMPSU-850TXV2)
CPU Cooler: Corsair (CWCH80) Hydro Series H80 High-performance CPU Cooler -- for Intel 2011/1366/1156/1155/775 & AMD AM3/AM2+/AM2
I have tried all the OSX versions i have.
I have tried retail 10.7.3, Lion l1 & l2, Leopard and Snow Leopard... with rBoot
All times I see some initial lines and in the iatkos I see the stuff after that(with grey background). When the GUI should come up it does not. What shows is black screen.
I have installed windows 7 on the system and partitioned the drive to install the osx but I cannot get to the GUI so nothing is happening.
My BIOS version is F8, It have tried most of these in F5(came with it).
What settings does my BIOS need to be?
I was told that all my specs work, so it should be the BIOS settings. If pictures could be provided that would be great.
I have tried using another (other than the on-board) graphics card. The sapphire 6450 but the same thing happens.
When i verbose boot, some lines come up CPU, RAM stuff.
Before I able to read the last lines it turns black. It is like it is switching screens and them it settles to to the black.
I ran iatkos l2 in virtualbox in my windows 7 partition. I get stuck at "Starting Darwin x86". Is there something to fix for this?
Last edited by brownix; 22 Jul 2012 at 14:41.