Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: RAID 1 install Win 7

29 Jul 2012   #11
eatdrinkadam

Win 7 Prof
 
 

Solved.

Heres the deal.

The box came with all 3 drives connected to the Intel SATA controllers. I took the OS C: drive OFF the Intel controller and onto the secondary Marvel controller by itself. Then I was able to load the RAID drivers from the C: drive during installation. So the Intel RAID exists separately from the OS drive. Now its all better.

Thanks for all the input!


My System SpecsSystem Spec
.
29 Jul 2012   #12
Golden
Microsoft MVP

Windows 7 Ult. x64
 
 

Hi,

Thats good - well done. Although I'm a bit puzzled as to why it was necessary. Anyway, as long as it works

Regards,
Golden
My System SpecsSystem Spec
Reply

 RAID 1 install Win 7




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
New RAID Array and Clean Install Win7HP-Help with RAID Driver Install
Hi :confused:, RAID and Win 7 Home Premium newbie. Short version of long story - replaced old dead RAID Drives in Win XP system with (2) new 500GB Drives plus plan to upgrade RAM to 8GB (would have liked more but $$$) and install new OS = WIN 7 Home Premium 64 Bit. MB is GA-EP45-UD3R Rev 1.1...
Installation & Setup
HDD not showing after SSD Raid install
Hi I have just installed 2 x 120Gb Samsung EVO drives in RAID 0, after successfull install of windows it seems my 500Gb Seagate HDD is not showing in windows... it shows in disk manager as 'foreign' dynamic disk and has little yellow triangle on it, I have data on it I dont want too lose, but I...
Hardware & Devices
Setup raid 0 after install
Can you setup a riad 0 after win 7 is installed, I have 2 1tb drives, win 7 on one other not setup yet.
Installation & Setup
Install on raid setup
Hello guys, I made a raid 0 setup through the disk management of windows of 2 320GB hdds, and now i want to install clean windows seven in my PC on those raid hdds. I went till the disk selection for installing but it shows me 2 hdds of 640GB.. and i i try to install on them they tell me to...
Installation & Setup
Still can't install RAID 0 drivers
I've read several forum threads on this, but am still having trouble. I have win 7 32bit RC up and running for a long time on a 500 gig WD. Bought two 1Ts for a raid 0. I have the RAID chosen correctly in the BIOS, and the utility works fine. At the clean install for either 64 or 32 bit, I try...
Drivers
Fresh Install on RAID - 0
Hello every one, I am currently awaiting the arival of my new motherboard and processor and just picked up a copy of win7 64bit. However, i have found controdicting information about windows 7's ability to recognize hard drives that are in a RAID array. I am goingto be installing on two WD...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App