Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SFC FAILURE; unable to upgrade/repair using Win7 disk

30 Jul 2012   #1
LEECHIPTURNER

win 7 64
 
 
SFC FAILURE; unable to upgrade/repair using Win7 disk

I have attached my CBS log file. I have an Corsair SSD drive that I boot from, and 3 TB of regular drives. Recently my SSD has slowed to a crawl, and just moving/deleting/copying produced errors and lockups. No virus or malware. Did not know I had to switch BIOS/OS settings to AHCI. Did that, but still get errors.

Did all the regular troubleshooting stuff (chkdsk, defrag, registry optimize, clean). Did SFC /scannow and found a bunch of errors that it could not fix. Downloaded from this site the ISO to build Win7 SP1, but no matter what I do, it still says my installation is newer than it is, and stops the install/repair.

So, I am back to trying to manually fixing the SFC errors. But, I have no idea what these errors mean; even looked them up and still don't get it.

For instance, what does this mean? How do you manually repair this?
"POQ 131 starts:
0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\53c176f3a06dcd01cf390000f004b40a._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
1: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\64e876f3a06dcd01d0390000f004b40a.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
2: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\750f77f3a06dcd01d1390000f004b40a.$$_schcache_f995a5d4decb8cc 0.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_schcache_f995a5d4decb8cc0.cdf-ms"
3: Create Directory: Directory = [l:46{23}]"\??\C:\Windows\SchCache", Attributes = 00000080
4: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a8689f3a06dcd01d2390000f004b40a.$$_system32_21f9a9c4a2f8b51 4.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_system32_21f9a9c4a2f8b514.cdf-ms"
5: Move File: Source = [l:240{120}]"\SystemRoot\WinSxS\Temp\PendingRenames\be978af3a06dcd01d3390000f004b40a.$$_system32_logfiles_ait_5b 4995189d2e6c55.cdf-ms", Destination = [l:152{76}]"\SystemRoot\WinSxS\FileMaps\$$_system32_logfiles_ait_5b4995189d2e6c55.cdf-ms"
6: Move File: Source = [l:258{129}]"\SystemRoot\WinSxS\Temp\PendingRenames\cebe8af3a06dcd01d4390000f004b40a.programdata_microsoft_windo ws_ait_140a03828e6ffe97.cdf-ms", Destination = [l:170{85}]"\SystemRoot\WinSxS\FileMaps\programdata_microsoft_windows_ait_140a03828e6ffe97.cdf-ms"
7: Create Directory: Directory = [l:72{36}]"\??\C:\Windows\System32\LogFiles\AIT", Attributes = 00000084
8: Move File: Source = [l:246{123}]"\SystemRoot\WinSxS\Temp\PendingRenames\700598f3a06dcd01d5390000f004b40a.$$_diagnostics_system_audio _9d2751b7c84ca0f1.cdf-ms", Destination = [l:158{79}]"\SystemRoot\WinSxS\FileMaps\$$_diagnostics_system_audio_9d2751b7c84ca0f1.cdf-ms"
9: Move File: Source = [l:258{129}]"\SystemRoot\WinSxS\Temp\Pendin
2012-07-29 10:43:51, Info CSI gRenames\915398f3a06dcd01d6390000f004b40a.$$_diagnostics_system_audio_en-us_9fb258d76056760d.cdf-ms", Destination = [l:170{85}]"\SystemRoot\WinSxS\FileMaps\$$_diagnostics_system_audio_en-us_9fb258d76056760d.cdf-ms"
10: Move File: Source = [l:244{122}]"\SystemRoot\WinSxS\Temp\PendingRenames\e41699f3a06dcd01d7390000f004b40a.$$_diagnostics_system_aero_ 8b2c42561936b3f0.cdf-ms", Destination = [l:156{78}]"\SystemRoot\WinSxS\FileMaps\$$_diagnostics_system_aero_8b2c42561936b3f0.cdf-ms"
11: Move File: Source = [l:256{128}]"\SystemRoot\WinSxS\Temp\PendingRenames\f53d99f3a06dcd01d8390000f004b40a.$$_diagnostics_system_aero_ en-us_1a668ac520a43d24.cdf-ms", Destination = [l:168{84}]"\SystemRoot\WinSxS\FileMaps\$$_diagnostics_system_aero_en-us_1a668ac520a43d24.cdf-ms"
12: Move File: Source = [l:242{121}]"\SystemRoot\WinSxS\Temp\PendingRenames\f8b3a2f3a06dcd01d9390000f004b40a.$$_system32_manifeststore_7 d35b12f9be4c20e.cdf-ms", Destination = [l:154{77}]"\SystemRoot\WinSxS\FileMaps\$$_system32_manifeststore_7d35b12f9be4c20e.cdf-ms"
13: Move File: Source = [l:234{117}]"\SystemRoot\WinSxS\Temp\PendingRenames\124ca5f3a06dcd01da390000f004b40a.$$_help_windows_en-us_b594929e73669c5e.cdf-ms", Destination = [l:146{73}]"\SystemRoot\WinSxS\FileMaps\$$_help_windows_en-us_b594929e73669c5e.cdf-ms"
14: Move File: Source = [l:228{114}]"\SystemRoot\WinSxS\Temp\PendingRenames\2273a5f3a06dcd01db390000f004b40a.$$_help_help_en-us_91e6e7979a9bf9c6.cdf-ms", Destination = [l:140{70}]"\SystemRoot\WinSxS\FileMaps\$$_help_help_en-us_91e6e7979a9bf9c6.cdf-ms"
15: Move File: Source = [l:234{117}]"\SystemRoot\WinSxS\Temp\PendingRenames\fa6ea7f3a06dcd01dc390000f004b40a.$$_appcompat_programs_99c7f 419bd54f4ca.cdf-ms", Destination = [l:146{73}]"\SystemRoot\WinSxS\FileMaps\$$_appcompat_programs_99c7f419bd54f4ca.cdf-ms"
16: Set File Information: File = [l:66{33}]"\??\C:\Windows\AppCompat\Programs", Attributes = 00000084
17: Create Directory: Directory = [l:58{29}]"\??\C:\Windows\Help\Corporate", Attributes = 00000080
18: C
2012-07-29 10:43:51, Info CSI reate Directory: Directory = [l:46{23}]"\??\C:\Windows\Help\OEM", Attributes = 00000080
19: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\fc29acf3a06dcd01dd390000f004b40a.$$_apppatch_1143992cbbbebca b.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_apppatch_1143992cbbbebcab.cdf-ms"
20: Move File: Source = [l:236{118}]"\SystemRoot\WinSxS\Temp\PendingRenames\0c51acf3a06dcd01de390000f004b40a.$$_apppatch_apppatch64_e39b ab3b20714e20.cdf-ms", Destination = [l:148{74}]"\SystemRoot\WinSxS\FileMaps\$$_apppatch_apppatch64_e39bab3b20714e20.cdf-ms"
21: Create Directory: Directory = [l:60{30}]"\??\C:\Windows\apppatch\Custom", Attributes = 00000080
22: Create Directory: Directory = [l:78{39}]"\??\C:\Windows\apppatch\Custom\Custom64", Attributes = 00000080

POQ 131 ends"

Thanks in advance for any help!
Win7 Home Premium 64 bit
6GB RAM
i7-950
Corsair 120GB SSD boot drive
3 TB storage
2 DVD drives
Cooler Master full tower
Gigabyte X58A-UD3R, ver 2.0 mobo
Corsair 650 watt psu
GeForce GT video


My System SpecsSystem Spec
.

30 Jul 2012   #2
gregrocker
Microsoft MVP

 
 

Does your installation have SP1? Is it a different bit-version 32- or 64-bit? These are the most common reasons for the error during Repair Install.

Does the problem persist after unplugging the other HD's?

What I would consider is getting a perfect Clean Install with a Upgrade Windows 7 Version following only the Best Practices in the tutorial to setup and maintain the install, then in the future fall back on a Win7 backup image if these problems arise again.
My System SpecsSystem Spec
30 Jul 2012   #3
Saltgrass

Windows 7 x64
 
 

Did you install the OS on the SSD with the AHCI controller enabled? If not, TRIM (garbage collection) may not be working even if you do change from IDE to AHCI. Not completely sure...but that is what the video at NewEgg is saying...
My System SpecsSystem Spec
.


30 Jul 2012   #4
LEECHIPTURNER

win 7 64
 
 
SSD

Thanks for the reply! Yes, running SP1 64 bit. No, didn't have AHCI on until a week after install. What newegg video? May have to do the reinstall.
My System SpecsSystem Spec
30 Jul 2012   #5
LEECHIPTURNER

win 7 64
 
 

Is there no way to fix these SFC errors manually? If I knew what they were, location, function, I could go into safemode and delete them, replace them...? Thoughts?
My System SpecsSystem Spec
30 Jul 2012   #6
gregrocker
Microsoft MVP

 
 

The best way to fix these files is to run SFC again a few more times to see if it will do it for you, then follow the steps in Option Three of SFC -SCANNOW Command to try to fix them yourself.

If this fails, you'll need a Repair Install or Clean Reisntall.
My System SpecsSystem Spec
31 Jul 2012   #7
Saltgrass

Windows 7 x64
 
 

You might check the Microsoft site to see what can be done. But the process can get a little complicated, if you have many problem files. What gregrocker suggest about reinstalling might be good if you decide not to go the repair route.

How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

The NewEgg video is at the link and they have a couple of videos that go through some of the information for SSDs. Look in the middle of the page. It may also be on YouTube.

Newegg.com - SSD, Solid State Drives
My System SpecsSystem Spec
Reply

 SFC FAILURE; unable to upgrade/repair using Win7 disk




Thread Tools





Similar help and support threads
Thread Forum
Unable to boot, repair or install from win 7 disk
Have used this disk many times with no problems. It works in another desktop. Have also tried, unsuccessfully, retail copies of XP and Vista. Can boot, with no problems, from hard drive. Downloaded new firmware for optical drive (Plextor PX-L890SA). Movies, music DVDs work fine in this...
Installation & Setup
Computer Failure; Unknown OS, Unable to perform Startup Repair
Windows 7, 64bit. Dell Inspiron 7720. On Start without CD, no OS is detected. I have tried taking the HardDrive out, and putting it back in, to ensure that it is properly attached. Unable to boot past BIOs, and having trouble repairing computer. Hard Drive has been renamed to "Boot (:X)", and...
Backup and Restore
Windows 7 Ult 32b boot failure; system repair unable to find install
In an attempt to remove a virus, I made some changes to my registry (after saving a backup of it) using CCleaner. Upon restart, my computer failed to boot; the windows logo appeared for a few seconds, as usual, then a blue error screen flashed, and before I could read it the system restarted. Now...
BSOD Help and Support
Unable to repair Windows 7 after hardware upgrade
I installed a new motherboard, CPU & memory today. Prior to this, I decided not to do a clean install of windows, but just to boot up & repair if needed when the new configuration booted up. I DID do a backup of data before dismantling the old system, so I have that saved. However, when I...
Installation & Setup
HOW TO REPAIR USING W7 UPGRADE DISK
My original OS was vista but up-graded to w7 home premium. :DCurrently I need to affect a repair to the system. 1 How do I use the up-grade disk to do a repair (Real w7 Disk) 2 I dont want to a complete re-install 3 I should change the boot order to cdrom hit F10 and enter
General Discussion
How Best Repair after Disk Failure
My SSD failed but I got it back up again by running checkdisk on a laptop. It is not entirely problem free though. Cannot get IE8 working, it crashes on the spot I open it. I have so far been happy not to gain any experience from a disk failure. What would be the best way to repair? I am thinking...
General Discussion

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:50.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App