Boot selection failed because a required device is inaccessible

Page 2 of 3 FirstFirst 123 LastLast

  1. Posts : 1,031
    Windows 7 x64
       #11

    Well, it looks good. Hopefully it stays that way.

    Did you get a separate drivers CD? Have you checked the Manufacturers site to see if drivers are available... Not suggesting you use them, just info you may need.
      My Computer


  2. Posts : 11
    Windows 7 Home Premium
    Thread Starter
       #12

    Good call...

    I did have a dell driver's disc hidden away in my desk, unopened. Includes diagnostics and utilities. Should I pop it in and run it? If so, anything in particular you think I should be looking for.

    I'm curious, because it says the programs were on the computer when it arrived, so shouldn't they have been on the recovery discs I made.
      My Computer


  3. Posts : 1,031
    Windows 7 x64
       #13

    I wish I could help, but I do not have any experience with OEM type situations.

    You may be able to download the SP1 update manually and try installing it. But I have to think a device driver is at the root of the problem. If you open device manager (devmgmt.msc) do you show any devices with a yellow mark?

    Maybe installing the latest drivers yourself would keep Windows Update from installing a bad one. Just no way for me to even guess.
      My Computer


  4. Posts : 2,171
    Windows 7 Ultimate x64
       #14

    Did you actually run all of the hard disk tests?
      My Computer


  5. Posts : 11
    Windows 7 Home Premium
    Thread Starter
       #15

    I ran the full diagnostic in F12. All passed, then it did the partition utility and came up with "Pure Call!"

    I also ran memtest 86 4a, for 3 hours, 4 tests... all passed no errors.

    Most of the suggestions I'm finding, indicate using a win7 repair disk, which I don't have.
      My Computer


  6. Posts : 11
    Windows 7 Home Premium
    Thread Starter
       #16

    I gave in and took it into a shop for diagnosis.

    They said it was the hard drive...

    So I replaced it, recovered the computer, set up windows and restarted...

    to the same issue.

    Needless to say, I've taken it back to the shop.
      My Computer


  7. Posts : 2,171
    Windows 7 Ultimate x64
       #17

    This will show you how you can download an iso to make a disc that can be used to repair the OS:

    Repair Install
      My Computer


  8. Posts : 2,171
    Windows 7 Ultimate x64
       #18

    Mediokrates said:
    I gave in and took it into a shop for diagnosis.

    They said it was the hard drive...

    So I replaced it, recovered the computer, set up windows and restarted...

    to the same issue.

    Needless to say, I've taken it back to the shop.
    Did they show you how they determined it was the hard drive?

    Did you buy the new drive from them?
      My Computer


  9. Posts : 11
    Windows 7 Home Premium
    Thread Starter
       #19

    no they didn't show me, but I've never had problems with them before, and a lot of people I know use them.

    However, I told him I wanted to return the hard drive, since I bought it from their diagnosis.
    I left it with them for now... but I'm downloading that iso just in case.
      My Computer


  10. Posts : 11
    Windows 7 Home Premium
    Thread Starter
       #20

    Hi there,

    Issue is solved.

    As I said, switching out the hard drive and performing a recovery did not work.
    I took it back, and they performed a clean Windows7 install... which worked.

    I wasn't particularly happy, since I lost a few programs, like Media center, and roxio, which came pre-installed, since they did a bare bones install. I also told them that I was concerned about buying the hard drive, since it didn't solve the issue. So they said they'd take it back, if I could get the old one working.

    So... I created a startup repair disc from the new Win7 install. Then I put the old hard drive in and booted. Win7 actually started this time, but hung up before the desktop appeared. I then booted to safe mode, and a blank desktop appeared. So I booted from the repair disc, and it didn't find any errors.

    So I recovered the hard drive again... and booted to the original error. I then booted again from the startup repair disc, which this time found a boot file error, and fixed it.

    Win7 then loaded! I performed updates and successfully restarted. I then replaced the trial programs with my permanent ones, and updated again. During this period, the computer restarted about a half dozen times. All successfully. So far, I have restarted the computer about 20 times, all with no issues.

    So issue seems resolved. I just needed a startup repair disc, which I stupidly neglected to make when I got the computer, thinking the recovery discs would be enough. I am a little confused about why there is such an error on the recovery discs, since making them was the first thing I did when the laptop came out of the box.

    So, just getting ready to return the replacement hard drive and get my money back.

    Hope this helps those with a similar issue.
      My Computer


 
Page 2 of 3 FirstFirst 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 19:39.
Find Us