Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 black screen on boot after install

27 Aug 2012   #1
Duubztep

Windows 7
 
 
Windows 7 black screen on boot after install

HAI.
I installed Windows 7 on my desktop pc & when it's done the first stage it reboots. Then it takes me to the part where it says 'Completing installation...' and it hangs at that for a minute or two. Then the screen goes black and i dont know why please help?
KTHXBYE.


My System SpecsSystem Spec
.
27 Aug 2012   #2
Carl Lawrence

Dual-boot: Windows 7 HP 32-bit SP1 & Windows XP Pro 32-bit SP2.
 
 

Can we have your pc specs please?
My System SpecsSystem Spec
27 Aug 2012   #3
Saltgrass

Windows 7 x64
 
 

Along with the specs, maybe a description of your video output. It might be related to the video switching resolution.

You don't mention anything about any type of cursor, so you see anything on the screen? And how long are you giving it to come back?
My System SpecsSystem Spec
.

Reply

 Windows 7 black screen on boot after install




Thread Tools




Similar help and support threads
Thread Forum
Windows 7 Repair Install screen black before install finished
Hi all Half way through the Windows 7 Repair install the monitor drivers seem to have corrupted. The screen works fine up to the Windows logo on a black background, then the screen goes dead. Everything is still working underneath, key presses seem to affect the hard disk, caps lock works,...
Installation & Setup
windows 7 will not boot goes to black screen
Hello, windows 7 on my laptop (toshiba sat.) will not boot it goes to the toshiba screen then black with cursor in top left. i cannot go to safe mode or startup repair because when you hold F8 or any other key it just beeps. im trying to keep from trying the factory reset. please help! thanks
General Discussion
Boot to black screen with blinking cursor, fresh install, not hdd
Hi eveyrone I've looked for an answer to my problem on google and found this site hoping it to help i signed up and i have a problem I'd like some insight on. I used to get the error of booting to a black screen and it would read "Reboot and select proper boot device or insert boot media and...
General Discussion
Cannot boot Windows 7 (Black Screen - Boot\BCD error)
I was having problems booting Windows 7, so I attempted to use the Bootrec.exe tool to rebuild the my BCD. But I screwed that up big time..... Now I get the following error message on a black screen when I attempt to boot up: Windows Failed to start. A recent hardware change or software...
BSOD Help and Support
Black Screen on Windows Boot
Hello, I really need help with this issue. I'm trying to fix my girlfriend's laptop, a Sony Vaio running Windows 7 Ultimate x32. When I power it on the Vaio logo appears and after it a black screen with a blinking underscore. No key works, except F2. I tried many ways, some described in this Forum,...
BSOD Help and Support
cannot boot windows 7, boot to black screen with blinking line
I upgraded my pc with a 120gb ssd from a 500 gb HDD. I installed Windows 7 on the ssd and formatted the old drive and thus removing its windows installation, however i did not remove the 100 mb system partition (did not know how to). When I restarted the computer it showed a black screen with a...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App