Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 clean install problem Freeze at "setup is preparing comp..."

07 Oct 2012   #1
Skordeath1

Windows 7 64bit
 
 
Windows 7 clean install problem Freeze at "setup is preparing comp..."

Hey guys, my computer is messed up beyond belief. I'm going to explain the whole story to you, so bare with me.

How this all started:
Well, long story short, my motherboard shorted out and caused all sorts of problems. After taking the whole system out and putting it on a test bed (self built system) I was able to start up the system. However, it would not let me start windows no matter what I did. So i resorted to formatting the SSD it was installed on. I then tried to reinstall windows; this did not work. I had many people tell me it was my motherboard that shorted out (it touched the case while I was trying to power on) and I needed to replace it. So i warrantied it to ASUS and I got it back in the mail several weeks later. I put the system back together, tried to install windows, same problem persisted. It would freeze before I could install. I then did research and decided to boot the disk in Safe Mode. This worked! I proceeded through the first steps of installation and then it required my computer to boot. Upon rebooting, I was brought to the "setup is starting services screen". I waited for a good hour or so and nothing happened. I did some more research and decided to Boot into safe mode again only for it to tell me "install cannot proceed in safe mode". I then opened command prompt, while still in safe mode, and opened device manager. I closed all the drivers that had the yellow triangle next to them. I rebooted and successfully made it past that page. The computer rebooted again and the "Setup is preparing your computer for first use" screen appeared only to be frozen like the one before. I booted in safe mode again, opened command prompt and made sure that all the yellow triangle drivers were disabled. All of them were. I tried to disable all drivers I possibly could and rebooted. Still nothing. I tried using a VGA monitor as I was told it might work; again nothing. This concludes this enormous flashback.

Were I am now:
So, I am stuck on this "setup is preparing your computer for first time use" screen with nothing left to do that I know off. This is were you guys come it. What can be done to get past this sceen?

Things I've done:
Purchased new RAM
Formatted my boot drive
warrantied motherboard
tried multiple RAM configs
Tried multiple SATA configs
Disabled drivers both in Bios and Device Manager
Ran in Safe Mode
Tried VGA Monitor (my main monitor is HDMI)


Other thoughts:
I have been working on this computer for almost a month and a half now and I'm getting frustrated with it. I'm only 16 years old and a new to computer building and trouble shooting, so don't expect me to know anything (talk to me as if you were talking to a baby; simple terms in other words) Please help, I need this computer for school projects and such; I've been forced to barrow a laptop from a friend for the time being.

Thanks everyone in advance for everything!


My System SpecsSystem Spec
.

13 Oct 2012   #2
Skordeath1

Windows 7 64bit
 
 

come on guys its been a week and still no response
My System SpecsSystem Spec
Reply

 Windows 7 clean install problem Freeze at "setup is preparing comp..."




Thread Tools





Similar help and support threads
Thread Forum
Installation stall at "Setup is preparing your computer for first use"
I am trying to install Windows 7 Ultimate x64 on my custom build. I get through the whole system setup and stall at the "setup is preparing your computer for first use" Here are my computer specs: AMD FX6300 Black Edition Asus M5A97 LE R2.0 8 GB GSkill Ripjawz DDR3 1333 MHz EVGA GeForce...
Installation & Setup
Windows 7 stuck at "setup is preparing your computer for first use"
I bought a new computer consisting of the following components motherboard: Asus M5A99X EVO R2.0 graphics card: Sapphire dual-x R2 270x CPU: AMD FX 8350 the rest off the components I took from my old PC and should all be okay. (600W power supply, 4GB DDR3 1600 Mhz RAM, 3TB HDD) The...
Installation & Setup
Getting stuck on "setup is preparing your computer for first use"
Hi Everyone, I'm trying to put a brand new copy of Windows 7 on my custom built PC which was running fine on Vista and XP. Completely fresh formatted hard drive. It gets as far as the "setup is preparing your computer for first use" screen and then just sits there indefinitely. ...
Installation & Setup
Windows 7 install problem "Setup cannot be completed"
Hey guys, New to the forums here and i absolutely need help. Ive looked all around for a solution to this and although ive found some good answers, none are particular to my case. Heres the story (ill try to keep it short as possible): Im installing Windows 7 ultimate onto an aunts...
Installation & Setup
Windows 7 does not boot past "setup is preparing..."
My laptop froze after entering a wrong product key. I then pressed the shut down button till my computer went off. I restarted the computer and chose the "start windows normally" option. The laptop boots to "setup is preparing for first use" screen. It lasts for about 1 minute and then the computer...
Installation & Setup
Windows 7 clean install problem "Power save mode"
Hi all, I have ran into the strangest problem while completing a fresh install of Windows 7. I had previously had Vista ultimate 64bit installed but decided to install Windows 7. The first time I did the install I decided NOT to format the vista partition, but to rather just install over it. I...
Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App