 | |
| |
| 30 Dec 2012 | #11 |
| | I didn't have any problems installing windows. I found out the first problem was it required a power supply (the converter). (Guess sometimes reading instructions will be a good idea). I found a pin on the CSEL position then moved it to the master one. Still nothing. I'm about to see if I move it to slave if it will work. I have a Samsung 1 TB hard drive on its own ribbon. The motherboard has 6 sata drives. |
My System Specs | |
| 31 Dec 2012 | #12 |
| Windows 7 Ultimate x64, XP Mode, W8 RP VM, Linux Mint Debian 2nd OS HD- 7 Pro x64 second case New England | If you plugged the converter in at the end of the ribbon cable the CS or master position should have worked. Generally you would use the CS setting since that is the universal which suggests the converter may be the problem if there is no fault with the drive itself. Testing it with a different ide cable as well as checking to see if the cable itself is plugged in all the way on the board end would another thing to look into. You might have a bad cable if no other drive has been using it. |
| My System Specs |
 |
Newly built computer, black screen Invalid system disk. problems?
| Thread Tools | |
| Similar help and support threads for: Newly built computer, black screen Invalid system disk. | ||||
| Thread | Forum | |||
 BSOD on newly built computer | BSOD Help and Support | |||
| Newly built computer with BSOD, please help! | BSOD Help and Support | |||
| Need help with newly built computer! | Drivers | |||
| BSOD on newly built system | BSOD Help and Support | |||
| BSOD newly built system | BSOD Help and Support | |||
All times are GMT -5. The time now is 02:35 AM.
