Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: [PROBLEM] Cannot boot from USB for windows installation


08 Dec 2012   #11
Microsoft MVP

 

Is everything resolved now? If so you can mark the thread Solved at top.

My System SpecsSystem Spec
.

08 Dec 2012   #12

Windows 7 Ultimate 64-Bit
 
 

Quote   Quote: Originally Posted by jumanji View Post
Try creating your installaion pendrive with WiNToBootic (only Windows 7/8 ), WiNToBootic - the ultimate Windows 7/8 USB Boot Disk Maker

The image source can be an ISO/DVD/Folder with bootable Windows content.

Just select quick format, drag and drop your source and click on Do it.

Provided your source is not corrupt, you should have your bootable installation pendrive in minutes.
Just used this program, took 55 minutes, tried to boot USB device, but same thing happens

Quote   Quote: Originally Posted by gregrocker View Post
Is everything resolved now? If so you can mark the thread Solved at top.
Nope, still can't get USB install to boot up.
My System SpecsSystem Spec
08 Dec 2012   #13
Microsoft MVP

 

Unplug all other HD's and peripherals.

Boot into BIOS setup to enable Legacy BIOS if present. Next check BIOS Boot order for an EFI Boot Disk and if present remove it, set DVD drive first to boot, HD second.

If no UEFI BIOS options then set BIOS to defaults: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS

Then set SATA controller to AHCI. Save changes and Exit.

Then boot into installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here.

At first installer screen Press Shift + F10 to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY SIZE=102400 (for 100gb partition, adjust as desired)
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.
My System SpecsSystem Spec
.


Reply

 [PROBLEM] Cannot boot from USB for windows installation




Thread Tools



Similar help and support threads for2: [PROBLEM] Cannot boot from USB for windows installation
Thread Forum
Problem boot up win7 for new MSATA SSD installation Installation & Setup
Windows 7 boot problem and installation problem. Installation & Setup
New Win 7 installation on Asus N53S, boot problem Installation & Setup
dual boot windows 7 and xp installation problem Installation & Setup
Installation problem. No video on first boot. Help! Installation & Setup
Windows 7 won't boot after installation Installation & Setup
XP won't boot after Windows 7 installation Installation & Setup

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:20 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33